The main document regulating urban planning activities in the Russian Federation is the Town Planning Code(Hereinafter - GrK). It defines all its legal aspects - from the procedure for conducting engineering surveys to putting the facility into operation. It also describes the procedure for the development, coordination and approval of project documentation for buildings, structures and linear facilities.
All construction works are classified in a certain way, their misinterpretation can lead to financial losses or other undesirable consequences. One of the most controversial issues is the subject of this article.
So, let's consider the definitions of the concepts of overhaul and reconstruction:
Reconstruction of objects capital construction (Article 1, paragraph 14 of the Civil Code) - changing the parameters of an object or its parts (height, number of floors, area, volume), including superstructure, reconstruction, expansion, as well as replacement and (or) restoration of load-bearing building structures, with the exception of replacement of individual elements of such structures with similar or other elements that improve the performance of such structures and (or) restoration of these elements;
The definition of the reconstruction of linear objects can be found in article 1, clause 14_1 of the Civil Code.
Overhaul of capital construction objects(Article 1, paragraph 14_2 of the Civil Code) - replacement and (or) restoration of building structures of an object or elements of such structures, with the exception of load-bearing building structures, replacement and (or) restoration of engineering support systems and engineering support networks or their elements , as well as replacement of individual elements of load-bearing building structures with similar or other elements that improve the performance of such structures and (or) restoration of these elements.
The definition of overhaul of linear objects can be found in article 14_3 of the Civil Code.
What does the assignment of works to one type or another affect?
The main feature of the reconstruction work is the need to develop a complete set of project documentation including all mandatory sections by Decree of the Government of the Russian Federation No. 87.
Also, in most cases, it will be necessary to carry out its examination.
In addition, you will have to obtain a building permit, in the event that structural elements or other characteristics of the reliability and safety of the facility are affected, as well as during the performance of work, the maximum permissible construction parameters are exceeded (part 17.4 of Article 51 of the Civil Code).
If you need to obtain a building permit, you also need to put the facility into operation after the completion of the work.
The procedure for preparing documentation for reconstruction is in many ways similar to the development of such documentation for new construction.- You will have to go through all the same stages. You can read more about this in the article "design documentation", which describes the composition of stage P, the need for its development for various objects, the procedure and features of passing state and non-state expertise, as well as other nuances.
When carrying out a major overhaul, in accordance with clause 12_2 of article 48 of the Civil Code, it is necessary to develop only those sections of the project documentation that affect the work performed. In addition, in accordance with paragraph 2 of Article 51 of the Civil Code, in this case no building permit is required.
Also, the commissioning of the facility is not required upon completion of the work.
Note that the assignment of works to one type or another is in the competence of the owner of the facility or the person responsible for its operation. It also affects the accounting of the said person, but this is a completely different topic and will not be covered here.
Carrying out reconstruction works without a building permit or under the guise of major repairs is punishable by law. In accordance with part 1 of Article 95 of the Code of Administrative Offenses, for these actions, legal entities are fined from 500 thousand to 1 million rubles or an administrative suspension of activities for up to 90 days.
Signs characterizing the reconstruction of a capital construction object
To begin with, let us note that at least one feature, indicated in the definition of the concept of "reconstruction", is sufficient to classify the works as this type.
For example, the following types of work will be classified as reconstruction:
- 1) Changing the number of storeys of the building
This implies a change in the number of floors. It should be borne in mind that not all parts of a building are floors, for example, an attic (as opposed to an attic) is not a floor. Accordingly, when equipping an attic in the attic space, the number of floors will change and become 1 more. Moreover, according to general rule, a building permit will not be required (provided that the roof configuration is preserved). If the roof is also undergoing reconstruction and its angle of inclination changes at least slightly, then the building volume will increase or decrease, which is also a sign of reconstruction. - 2) Change in construction volume
In this case, a building permit is required, since part of the supporting structures is modified and the structural reliability changes. - 3) Replacement and (or) restoration of load-bearing building structures, excluding restoration / replacement of their individual elements with similar or improved ones
If at least one structural element remains during the demolition of an object, then all subsequent work will refer not to new construction, but to reconstruction, since part of the object is preserved. What designs and in what volume is completely irrelevant. Even if you completely demolish the building and erect a new one with the same characteristics, it will still be considered a reconstruction. And only in the case of the complete demolition of the old object and the construction of a new one, different from the one that existed in this place before, can the work be considered as a new construction.
The line between renovation and overhaul
According to the definitions of these concepts, the difference lies in the number of replaced structural elements.
Overhaul - replacement of part of the supporting structures or their individual elements. De jure, when 99% of the beams are replaced, we can say that this type of work is a major overhaul. Thus, you do not need to develop a complete set of project documentation for the Decree of the Government of the Russian Federation No. 87, obtain a building permit and put the facility into operation.
Briefly about the reconstruction and overhaul of linear facilities
The criteria that determine the line between reconstruction and overhaul of linear facilities are: changes in the class, category, originally established performance indicators of the facility, changes in the boundaries of the right-of-way or security zones.
In this article, we will not consider in detail the nuances of reconstruction and overhaul of linear objects and will restrict ourselves to giving one classic example: if you are going to build any object next to a road (gas station, car wash, etc.), then you will have to make entrances from it and ramps that are more likely to affect throughput. It is also possible that the right-of-way will change. Therefore, sometimes formally and legally, during the construction of such facilities, it is necessary to reconstruct a linear facility.
The list of types of work in construction was applied from January 1, 2009 (since the introduction of the institute of self-regulation in the construction sector) and until July 1, 2017, when it was canceled in accordance with Federal Law No. the code of the Russian Federation and certain legislative acts of the Russian Federation ”(see details).
V this moment the criteria (requirements) for which joining an SRO in construction is required are defined by the Urban Planning Code of the Russian Federation - Criteria for membership in an SRO in construction.
List of construction types of work
approved by Order of the Ministry of Regional Development of the Russian Federation No. 624 of December 30, 2009
(as amended by the Order of the Ministry of Regional Development of the Russian Federation of 23.06.2010 N 294)
III. Types of construction, reconstruction and overhaul works
1. Geodetic works performed at construction sites
1.1. Layout work during construction *
1.2. Geodetic control of the accuracy of the geometric parameters of buildings and structures *
2. Preparatory work
2.1. Dismantling (dismantling) of buildings and structures, walls, ceilings, flights of stairs and other structural and related elements or parts thereof *
2.2. Construction of temporary: roads; sites; engineering networks and structures *
2.3. Construction of crane rail tracks and foundations (supports) of stationary cranes
2.4. Installation and dismantling of inventory external and internal scaffolding, technological garbage chutes *
3. Earthwork
3.1. Mechanized soil excavation *
3.2. Soil development and drainage in water management construction
3.3. Development of soil by hydromechanization
3.4. Artificial soil freezing works
3.5. Compaction with rollers, compactors or heavy rammers *
3.6. Mechanized loosening and development of permafrost soils
3.7. Works on dewatering, organization of surface runoff and drainage
4. Well construction
4.1. Drilling, construction and installation of oil and gas wells *
4.2. Drilling and construction of wells (except for oil and gas wells)
4.3. Casing of wells with pipes, extraction of pipes, free lowering or lifting of pipes from wells
4.4. Grouting works
4.5. Construction of mine wells
5. Pile work. Anchoring soils
5.1. Piling works performed from the ground, including in sea and river conditions
5.2. Piling works performed in frozen and permafrost soils
5.3. Grillage device
5.4. Driven and bored piles
5.5. Thermal strengthening of soils
5.6. Cementation of subsoils with injector plugging
5.7. Silicatization and resinization of soils
5.8. Work on the construction of structures using the "wall in the ground" method.
5.9. Driving and lifting of steel and sheet piles
6. Construction of concrete and reinforced concrete monolithic structures
6.1. Formwork works
6.2. Reinforcement work
6.3. Installation of monolithic concrete and reinforced concrete structures
7. Installation of precast concrete and reinforced concrete structures
7.1. Installation of foundations and structures of the underground part of buildings and structures
7.2. Installation of structural elements of the aboveground part of buildings and structures, including columns, frames, crossbars, trusses, beams, slabs, belts, wall panels and partitions
7.3. Installation of bulk blocks, including ventilation blocks, elevator shafts and garbage chutes, sanitary cabins
8. Drilling and blasting during construction
9. Work on the device of stone structures
9.1. Construction of buildings and structures made of natural and artificial stones, including cladding *
9.2. Construction of brick structures, including those with cladding *
9.3. Installation of heating furnaces and hearths *
10. Installation of metal structures
10.1. Installation, strengthening and dismantling of structural elements and enclosing structures of buildings and structures
10.2. Installation, strengthening and dismantling of transport gallery structures
10.3. Installation, strengthening and dismantling of tank structures
10.4. Installation, strengthening and dismantling of mast structures, towers, chimneys
10.5. Installation, strengthening and dismantling of technological structures
10.6. Installation and dismantling of cable bearing structures (stretch marks, cable-stayed structures, etc.)
11. Installation of wooden structures
11.1. Installation, strengthening and dismantling of structural elements and enclosing structures of buildings and structures, including those made of glued structures *
11.2. Assembly of residential and public buildings from factory-made parts of a complete delivery *
12. Protection of building structures, pipelines and equipment (except for main and field pipelines)
12.1. Lining works
12.2. Masonry made of acid-resistant bricks and shaped acid-resistant ceramic products
12.3. Protective coating with paints and varnishes *
12.4. Gumming (lining with sheet rubber and liquid rubber compounds)
12.5. Papered insulation device
12.6. Arrangement of metallization coatings
12.7. Application of topcoat when installing a monolithic floor in rooms with aggressive environments
12.8. Antiseptic treatment of wooden structures
12.9. Waterproofing of building structures
12.10. Works on thermal insulation of buildings, building structures and equipment
12.11. Works on thermal insulation of pipelines *
12.12. Fire protection of building structures and equipment
13. Roofing device
13.1. Installation of roofs made of piece and sheet materials *
13.2. Roofing from roll materials *
13.3. Self-leveling roofing *
14. Facade work
14.1. Surface cladding with natural and artificial stones and linear shaped stones *
14.2. Ventilated facades *
15. The device of internal engineering systems and equipment of buildings and structures
15.1. Installation and dismantling of the water supply and sewerage system *
15.2. Installation and dismantling of the heating system *
15.3. Installation and dismantling of the gas supply system
15.4. Installation and dismantling of ventilation and air conditioning systems *
15.5. Power supply system device *
15.6. Arrangement of electrical and other control networks for life support systems of buildings and structures *
16. Arrangement of external water supply networks
16.1. Laying of plumbing pipelines
16.2. Installation and dismantling of valves and equipment for water supply networks
16.3. Arrangement of water wells, heads, catchment absorbers
16.4. Cavity cleaning and testing of plumbing pipelines
17. Arrangement of external sewerage networks
17.1. Laying of free-flow sewer pipelines
17.2. Laying of sewer pressure pipelines
17.3. Installation and dismantling of valves and equipment for sewer networks
17.4. Construction of sewerage and drainage wells
17.5. Arrangement of a filtering base for sludge platforms and filtration fields
17.6. Laying drainage pipes at sludge sites
17.7. Cavity cleaning and testing of sewer pipelines
18. Arrangement of external heat supply networks
18.1. Laying heat supply pipelines with a coolant temperature of up to 115 degrees Celsius
18.2. Laying heat supply pipelines with a coolant temperature of 115 degrees Celsius and above
18.3. Installation and dismantling of valves and equipment for heat supply networks
18.4. Arrangement of wells and chambers of heat supply networks
18.5. Cavity cleaning and testing of heating pipelines
19. Arrangement of external gas supply networks, except for main ones
19.1. Laying of gas pipelines with a working pressure of up to 0.005 MPa inclusive
19.2. Laying gas pipelines with a working pressure from 0.005 MPa to 0.3 MPa inclusive
19.3. Laying gas pipelines with a working pressure of 0.3 MPa to 1.2 MPa inclusive (for natural gas), up to 1.6 MPa inclusive (for liquefied petroleum gas)
19.4. Installation of condensate collectors, hydraulic locks and expansion joints on gas pipelines
19.5. Installation and dismantling of gas control points and installations
19.6. Installation and dismantling of tank and group cylinder installations of liquefied gas
19.7. Putting a gas pipeline into buildings and structures
19.8. Installation and dismantling of gas equipment for consumers using natural and liquefied gas
19.9. Tapping under pressure into existing gas pipelines, disconnecting and plugging under pressure of existing gas pipelines
19.10. Cavity cleaning and testing of gas lines
20. Installation of external electrical networks and communication lines
20.1. Arrangement of power supply networks with voltage up to 1 kV inclusive *
20.2. Arrangement of power supply networks with voltage up to 35 kV inclusive
20.3. Arrangement of power supply networks with voltage up to 330 kV inclusive
20.4. Arrangement of power supply networks with a voltage of more than 330Kv *
20.5. Installation and dismantling of supports for overhead power lines with voltage up to 35 kV
20.6. Installation and dismantling of supports for overhead power lines with voltage up to 500 kV
20.7. Installation and dismantling of supports for overhead power lines with a voltage of more than 500 kV *
20.8. Installation and dismantling of wires and lightning protection cables of overhead power lines with voltage up to 35 kV inclusive
20.9. Installation and dismantling of wires and lightning protection cables of overhead power lines with voltage over 35 kV
20.10. Installation and dismantling of transformer substations and linear electrical equipment with voltage up to 35 kV inclusive
20.11. Installation and dismantling of transformer substations and linear electrical equipment with voltage over 35 kV
20.12. Installation of switchgears, switchgear, protection devices
20.13. Installation of external communication lines, including telephone, radio and television *(introduced by Order No. 294)
21. Arrangement of facilities for the use of atomic energy
21.1. Works on the construction of facilities with nuclear installations *(introduced by Order No. 294)
21.2. Works on the construction of nuclear weapons complex facilities *(introduced by Order No. 294)
21.3. Works on the construction of particle accelerators and hot chambers *(introduced by Order No. 294)
21.4. Works on the construction of facilities for the storage of nuclear materials and radioactive substances, storage facilities for radioactive waste *(introduced by Order No. 294)
21.5. Works on the construction of nuclear fuel cycle facilities *(introduced by Order No. 294)
21.6. Uranium mining and processing facilities construction works *(introduced by Order No. 294)
21.7. Decommissioning of nuclear facilities * (introduced by Order No. 294)
22. Arrangement of objects of the oil and gas industry
22.1. Installation of main and field pipelines
22.2. Works on the arrangement of facilities for the preparation of oil and gas for transport
22.3. Arrangement of oil depots and gas storage facilities
22.4. Arrangement of crossing structures under linear objects (roads and railways) and other obstacles of natural and artificial origin
22.5. Construction of crossings using directional drilling;
22.6. Device for electrochemical protection of pipelines
22.7. Tapping under pressure into existing main and field pipelines, disconnecting and plugging under pressure of existing main and field pipelines
22.8. Carrying out anti-corrosion protection and insulation works in relation to main and field pipelines
22.9. Construction of offshore oil and gas fields *
22.10. Works on the construction of gas filling compressor stations
22.11. Quality control of welded joints and their insulation
22.12. Cavity cleaning and testing of main and field pipelines
23. Installation work
23.1. Installation of handling equipment
23.2. Installation of elevators
23.3. Installation of equipment for thermal power plants
23.4. Installation of boiler equipment
23.5. Installation of compressor units, pumps and fans *
23.6. Installation of electrical installations, equipment, automation and signaling systems *
23.7. Installation of equipment for nuclear facilities * (Order No. 294)
23.8. Installation of equipment for cleaning and preparation for transportation of gas and oil *
23.9. Installation of equipment for oil and gas pumping stations and for other product pipelines
23.10. Installation of equipment for liquefaction of natural gas
23.11. Installation of equipment petrol stations
23.12. Installation of equipment for ferrous metallurgy enterprises *
23.13. Installation of equipment for non-ferrous metallurgy enterprises *
23.14. Installation of equipment for the chemical and oil refining industry *
23.15. Installation of mining and mining equipment *
23.16. Installation of equipment for railway infrastructure facilities
23.17. Installation of equipment for subways and tunnels *
23.18. Installation of equipment for hydroelectric stations and other hydraulic structures
23.19. Installation of equipment for enterprises of the electrical industry
23.20. Installation of equipment for enterprises of the building materials industry
23.21. Installation of equipment for the pulp and paper industry
23.22. Installation of equipment for textile industry enterprises
23.23. Installation of equipment for printing industry enterprises
23.24. Installation of equipment for food industry enterprises *
23.25. Installation of equipment for theater and entertainment enterprises
23.26. Installation of equipment for grain storage and grain processing enterprises
23.27. Installation of equipment for cinematography enterprises *
23.28. Installation of equipment for enterprises of the electronic industry and communications industry *
23.29. Installation of equipment for healthcare institutions and medical industry enterprises *
23.30. Installation of equipment for agricultural production, including fish processing and fish storage *
23.31. Installation of equipment for consumer services and utilities *
23.32. Installation of water intake equipment, sewer and treatment facilities
23.33. Installation of equipment for communication facilities *
23.34. Installation of equipment for space infrastructure facilities *
23.35. Installation of airport equipment and other aviation infrastructure facilities *
23.36. Installation of equipment for sea and river ports
24. Commissioning works
24.1. Commissioning of handling equipment
24.2. Commissioning of elevators
24.3. Commissioning of synchronous generators and excitation systems
24.4. Commissioning of power and measuring transformers
24.5. Commissioning of switching devices
24.6. Commissioning of relay protection devices
24.7. Commissioning of power supply automation *
24.8. Commissioning of voltage and control current systems
24.9. Commissioning of electrical machines and electric drives
24.10. Commissioning of automation systems, signaling and interconnected devices *
24.11. Commissioning of autonomous system adjustment *
24.12. Commissioning of complex system adjustment *
24.13. Commissioning of telemechanics equipment *
24.14. Adjustment of ventilation and air conditioning systems *
24.15. Commissioning of automatic machine lines
24.16. Commissioning of metal-cutting multipurpose CNC machines
24.17. Commissioning of unique metal-cutting machines weighing over 100 tons
24.18. Commissioning of refrigeration units *
24.19. Commissioning of compressor units
24.20. Commissioning of steam boilers
24.21. Commissioning of hot water heating boilers *
24.22. Commissioning of auxiliary boiler equipment *
24.23. Commissioning of water treatment equipment and chemical water treatment equipment
24.24. Commissioning of technological units of the fuel economy
24.25. Commissioning of the gas-air duct
24.26. Commissioning of general boiler systems and utilities
24.27. Commissioning of equipment for processing and finishing wood
24.28. Commissioning of drying plants
24.29. Commissioning of water supply facilities
24.30. Commissioning of sewage facilities
24.31. Commissioning works at the facilities of the oil and gas complex *
24.32. Commissioning works at nuclear facilities * (Order No. 294)
25. Arrangement of highways and airfields
25.1. Construction of roadbed for highways, airport aprons, runways, taxiways
25.2. Arrangement of the foundations of highways
25.3. Arrangement of bases for airport aprons, runways, taxiways *
25.4. Devices for road pavements, including those reinforced with binders
25.5. Coating devices for airport aprons, runways, taxiways *
25.6. Installation of drainage, drainage, culverts, spillway devices
25.7. Arrangement of protective fences and road construction elements
25.8. Road marking device
26. Arrangement of railway and tram tracks
26.1. Work on the construction of subgrade for railway tracks
26.2. Tramway subgrade construction
26.3. Railway track superstructure device
26.4. Installation of drainage and protective structures of the roadbed of the railway track
26.5. Installation of signaling, centralization and blocking of railways
26.6. Railroad electrification
26.7. Anchoring soils in the railway right-of-way
26.8. Arrangement of level crossings
27. Arrangement of tunnels, subways
27.1. Roadheading of tunnels and subways without the use of special tunneling methods *
27.2. Roadheading of tunnels and subways using artificial freezing *
27.3. Roadheading of tunnels and subways using grouting *
27.4. Roadheading of tunnels and subways using electrochemical fastening *
27.5. Roadheading of tunnels and subways with the use of drop support *
27.6. Installation of internal structures of tunnels and subways *
27.7. Subway track arrangement *
28. Arrangement of mine structures
28.1. Driving in mine structures without the use of special driving methods *
28.2. Driving excavation of mine structures using artificial freezing *
28.3. Driving the excavation of mine structures using grouting *
28.4. Driving of mine structures using electrochemical fastening *
28.5. Sinking of mine structures with the use of drop support *
29. Construction of bridges, overpasses and overpasses
29.1. Installation of monolithic reinforced concrete and concrete structures of bridges, flyovers and overpasses
29.2. Installation of prefabricated reinforced concrete structures for bridges, flyovers and overpasses
29.3. Construction of pedestrian bridges
29.4. Installation of steel superstructures of bridges, flyovers and overpasses
29.5. Construction of wooden bridges, flyovers and overpasses
29.6. Construction of stone bridges, overpasses and overpasses
29.7. Laying culverts on finished foundations (foundations) and drainage trays
30. Hydraulic works, diving works
30.1. Development and movement of soil with water jet and floating dredgers *
30.2. Loosening and development of soils under water by a mechanized method and delivery to a dump or floating equipment
30.3. Drilling and arrangement of wells under water
30.4. Piling works carried out in sea conditions from floating equipment, including the installation of shell piles
30.5. Piling works performed in river conditions from floating equipment, including the installation of shell piles
30.6. Construction of structures in sea and river conditions from natural and artificial massifs
30.7. Construction of dams
30.8. Installation, dismantling of building structures in underwater conditions
30.9 Subsea Pipeline Laying
30.10. Underwater cable laying, including electrical and communications
30.11. Diving (underwater construction) works, including quality control of hydraulic engineering works under water
31. Industrial ovens and chimneys
31.1. Blast furnaces masonry *
31.2. Masonry of the topside structure of glass furnaces
31.3. Installation of furnaces from prefabricated elements of increased factory readiness
31.4. Electrolyzers for the aluminum industry
31.5. Lining of industrial smoke and ventilation furnaces and pipes
32. Work on the implementation of construction control by a contracted developer or customer on the basis of a contract by a legal entity or individual entrepreneur:
32.1. Construction control over general construction works (groups of types of work No. 1-3, 5-7, 9-14)
32.2. Construction control over well completion works (group of types of work No. 4)
32.3. Construction control over drilling and blasting operations (group of types of work No. 8)
32.4. Construction control over works in the field of water supply and sewerage (type of work No. 15.1, 23.32, 24.29, 24.30, groups of types of work No. 16, 17)
32.5. Construction control over work in the field of heat and gas supply and ventilation (types of work No. 15.2, 15.3, 15.4, 23.4, 23.5, 24.15, 24.19, 24.20, 24.25, 24.26, groups of types of work No. 18, 19)
32.6. Construction control over works in the field of fire safety (type of work No. 12.12, 23.6, 24.10-24.12)
32.7. Construction control over works in the field of power supply (type of work No. 15.7, 23.6, 24.3-24.10, group of types of work No. 20)
32.8. Construction control during construction, reconstruction and overhaul of communication facilities (types of work N 20.13, 23.6, 23.28, 23.33, 24.7, 24.10, 24.11, 24.12) (Order No. 294)
32.9. Construction control during construction, reconstruction and overhaul of oil and gas industry facilities (type of work No. 23.9, group of types of work No. 22)
32.10. Construction control during the construction, reconstruction and overhaul of highways and airfields, bridges, flyovers and overpasses (type of work No. 23.35, groups of types of work No. 25, 29)
32.11. Construction control during the arrangement of railway and tram tracks (types of work No. 23.16, group of types of work No. 26)
32.12. Construction control during construction, reconstruction and overhaul in underground conditions (types of work No. 23.17, groups of types of work No. 27, 28) *
32.13. Construction control over hydraulic engineering and diving works (group of types of work No. 30)
32.14. Construction control during construction, reconstruction and overhaul of industrial furnaces and chimneys (group of types of work No. 31)
32.15. Deleted (Order No. 294)
33. Work on the organization of construction, reconstruction and overhaul by a contracted developer or customer on the basis of a contract by a legal entity or an individual entrepreneur (general contractor):
33.1. Industrial engineering
33.1.1. Enterprises and objects of the fuel industry
33.1.2. Enterprises and facilities of the coal industry *
33.1.3. Ferrous metallurgy enterprises and facilities *
33.1.4. Enterprises and facilities of non-ferrous metallurgy *
33.1.5 Enterprises and facilities of the chemical and petrochemical industry
33.1.6 Enterprises and objects of mechanical engineering and metalworking
33.1.7. Enterprises and facilities of the forestry, woodworking, pulp and paper industries
33.1.8. Enterprises and objects of light industry *
33.1.9. Enterprises and facilities of the food industry *
33.1.10. Enterprises and objects of agriculture and forestry *
33.1.11. Thermal power plants
33.1.12. Nuclear facilities *
33.1.13. Power supply facilities over 110 kV
33.1.14. Oil and gas facilities
33.2. Transport construction
33.2.1. Car roads and infrastructure facilities for road transport
33.2.2. Railways and railway infrastructure facilities
33.2.3. Airports and other aviation infrastructure facilities *
33.2.4. Road and rail tunnels
33.2.5. Subways *
33.2.6. Bridges (large and medium)
33.2.7. Enterprises and facilities public transport*
33.3. Housing and civil construction
33.4. Power supply facilities up to 110 kV inclusive
33.5. Heat supply facilities
33.6. Gas supply facilities
33.7. Water supply and sewerage facilities
33.8. Buildings and structures of communication facilities
33.9. Marine transport facilities
33.10. River transport facilities
33.11. Hydropower facilities
33.12. Dams, dams, canals, bank protection structures, reservoirs (excluding hydropower facilities)
33.13. Irrigation and drainage facilities
34. Work on the implementation of construction control by the developer, or by a contracted developer or customer on the basis of an agreement by a legal entity or an individual entrepreneur in the construction, reconstruction and overhaul of nuclear facilities (types of work N 23.7, 24.32, group of types of work N 21) * (introduced Order No. 294)
* These types and groups of types of work require obtaining a certificate of admission to the types of work affecting the safety of a capital construction facility, in the event that such work is performed at the facilities specified in Article 48.1 of the Town Planning Code of the Russian Federation (highlighted in red) -
III. Types of construction, reconstruction and overhaul works
1. Geodetic works performed at construction sites
1.1. Layout work during construction *
1.2. Geodetic control of the accuracy of the geometric parameters of buildings and structures *
2. Preparatory work
2.1. Dismantling (dismantling) of buildings and structures, walls, ceilings, flights of stairs and other structural and related elements or their parts *
2.2. Construction of temporary: roads; sites; engineering networks and structures *
2.3. Construction of crane rail tracks and foundations (supports) of stationary cranes
2.4. Installation and dismantling of inventory external and internal scaffolding, technological garbage chutes *
3. Earthwork
3.1. Mechanized soil excavation *
3.2. Soil development and drainage in water management construction
3.3. Development of soil by hydromechanization
3.4. Artificial soil freezing works
3.5. Compaction with rollers, compactors or heavy rammers *
3.6. Mechanized loosening and development of permafrost soils
3.7. Works on dewatering, organization of surface runoff and drainage
4. Well construction
4.1. Drilling, construction and installation of oil and gas wells
4.2. Drilling and construction of wells (except for oil and gas wells)
4.3. Casing of wells with pipes, extraction of pipes, free lowering or lifting of pipes from wells
4.4. Grouting works
4.5. Construction of mine wells
5. Pile work. Anchoring soils
5.1. Piling works performed from the ground, including in sea and river conditions
5.2. Piling works performed in frozen and permafrost soils
5.3. Grillage device
5.4. Driven and bored piles
5.5. Thermal strengthening of soils
5.6. Cementation of subsoils with injector plugging
5.7. Silicatization and resinization of soils
5.8. Work on the construction of structures using the "wall in the ground" method.
5.9. Driving and lifting of steel and sheet piles
6. Construction of concrete and reinforced concrete monolithic structures
6.1. Formwork works
6.2. Reinforcement work
6.3. Installation of monolithic concrete and reinforced concrete structures
7. Installation of precast concrete and reinforced concrete structures
7.1. Installation of foundations and structures of the underground part of buildings and structures
7.2. Installation of structural elements of the aboveground part of buildings and structures, including columns, frames, crossbars, trusses, beams, slabs, belts, wall panels and partitions
7.3. Installation of bulk blocks, including ventilation blocks, elevator shafts and garbage chutes, sanitary cabins
8. Drilling and blasting during construction
9. Work on the device of stone structures
9.1. Construction of buildings and structures made of natural and artificial stones, including cladding *
9.2. Construction of brick structures, including those with cladding *
9.3. Installation of heating furnaces and hearths *
10. Installation of metal structures
10.1. Installation, strengthening and dismantling of structural elements and enclosing structures of buildings and structures
10.2. Installation, strengthening and dismantling of transport gallery structures
10.3. Installation, strengthening and dismantling of tank structures
10.4. Installation, strengthening and dismantling of mast structures, towers, chimneys
10.5. Installation, strengthening and dismantling of technological structures
10.6. Installation and dismantling of cable bearing structures (stretch marks, cable-stayed structures, etc.)
11. Installation of wooden structures
11.1. Installation, strengthening and dismantling of structural elements and enclosing structures of buildings and structures, including those made of glued structures *
11.2. Assembly of residential and public buildings from factory-made parts of a complete delivery *
12. Protection of building structures, pipelines and equipment (except for main and field pipelines)
12.1. Lining works
12.2. Masonry made of acid-resistant bricks and shaped acid-resistant ceramic products
12.3. Protective coating with paints and varnishes *
12.4. Gumming (lining with sheet rubber and liquid rubber compounds)
12.5. Papered insulation device
12.6. Arrangement of metallization coatings
12.7. Application of topcoat when installing a monolithic floor in rooms with aggressive environments
12.8. Antiseptic treatment of wooden structures
12.9. Waterproofing of building structures
12.10. Works on thermal insulation of buildings, building structures and equipment
12.11. Works on thermal insulation of pipelines *
12.12. Fire protection of building structures and equipment
13. Roofing device
13.1. Installation of roofs made of piece and sheet materials *
13.2. Roofing from roll materials *
13.3. Self-leveling roofing *
14. Facade work
14.1. Surface cladding with natural and artificial stones and linear shaped stones *
14.2. Ventilated facades *
15. Arrangement of internal engineering systems and equipment of buildings and structures
15.1. Installation and dismantling of the water supply and sewerage system *
15.2. Installation and dismantling of the heating system *
15.3. Installation and dismantling of the gas supply system
15.4. Installation and dismantling of ventilation and air conditioning systems *
15.5. Power supply system device *
15.6. Arrangement of electrical and other control networks for life support systems of buildings and structures *
16. Arrangement of external water supply networks
16.1. Laying of plumbing pipelines
16.2. Installation and dismantling of valves and equipment for water supply networks
16.3. Arrangement of water wells, heads, catchment absorbers
16.4. Cavity cleaning and testing of plumbing pipelines
17. Arrangement of external sewerage networks
17.1. Laying of free-flow sewer pipelines
17.2. Laying of sewer pressure pipelines
17.3. Installation and dismantling of valves and equipment for sewer networks
17.4. Construction of sewerage and drainage wells
17.5. Arrangement of a filtering base for sludge platforms and filtration fields
17.6. Laying drainage pipes at sludge sites
17.7. Cavity cleaning and testing of sewer pipelines
18. Arrangement of external heat supply networks
18.1. Laying heat supply pipelines with a coolant temperature of up to 115 degrees Celsius
18.2. Laying heat supply pipelines with a coolant temperature of 115 degrees Celsius and above
18.3. Installation and dismantling of valves and equipment for heat supply networks
18.4. Arrangement of wells and chambers of heat supply networks
18.5. Cavity cleaning and testing of heating pipelines
19. Arrangement of external gas supply networks, except for main ones
19.1. Laying of gas pipelines with a working pressure of up to 0.005 MPa inclusive
19.2. Laying gas pipelines with a working pressure from 0.005 MPa to 0.3 MPa inclusive
19.3. Laying gas pipelines with operating pressure from 0.3 MPa to 1.2 MPa inclusive (for natural gas), up to 1.6 MPa inclusive (for liquefied petroleum gas)
19.4. Installation of condensate collectors, hydraulic locks and expansion joints on gas pipelines
19.5. Installation and dismantling of gas control points and installations
19.6. Installation and dismantling of tank and group cylinder installations of liquefied gas
19.7. Putting a gas pipeline into buildings and structures
19.8. Installation and dismantling of gas equipment for consumers using natural and liquefied gas
19.9. Tapping under pressure into existing gas pipelines, shutting off and plugging under pressure of existing gas pipelines
19.10. Cavity cleaning and testing of gas lines
20. Arrangement of external electrical networks
20.1. Arrangement of power supply networks with voltage up to 1 kV inclusive *
20.2. Arrangement of power supply networks with voltage up to 35 kV inclusive
20.3. Arrangement of power supply networks with voltage up to 330 kV inclusive
20.4. Arrangement of power supply networks with a voltage of more than 330 kV
20.5. Installation and dismantling of supports for overhead power lines with voltage up to 35 kV
20.6. Installation and dismantling of supports for overhead power lines with voltage up to 500 kV
20.7. Installation and dismantling of supports for overhead power lines with a voltage of more than 500 kV
20.8. Installation and dismantling of wires and lightning protection cables of overhead power lines with voltage up to 35 kV inclusive
20.9. Installation and dismantling of wires and lightning protection cables of overhead power lines with voltage over 35 kV
20.10. Installation and dismantling of transformer substations and linear electrical equipment with voltage up to 35 kV inclusive
20.11. Installation and dismantling of transformer substations and linear electrical equipment with voltage over 35 kV
20.12. Installation of switchgears, switchgear, protection devices
21. Arrangement of external communication lines, including telephone, radio and television *
22. Arrangement of objects of the oil and gas industry
22.1. Installation of main and field pipelines
22.2. Works on the arrangement of facilities for the preparation of oil and gas for transport
22.3. Arrangement of oil depots and gas storage facilities
22.4. Arrangement of crossing structures under linear objects (roads and railways) and other obstacles of natural and artificial origin
22.5. Construction of crossings using directional drilling;
22.6. Device for electrochemical protection of pipelines
22.7. Tapping under pressure into existing main and field pipelines, shutting off and plugging under pressure of existing main and field pipelines
22.8. Carrying out anti-corrosion protection and insulation works in relation to main and field pipelines
22.9. Construction of offshore oil and gas fields
22.10. Works on the construction of gas filling compressor stations
22.11. Quality control of welded joints and their insulation
22.12. Cavity cleaning and testing of main and field pipelines
23. Installation work
23.1. Installation of handling equipment
23.2. Installation of elevators
23.3. Installation of equipment for thermal power plants
23.4. Installation of boiler equipment
23.5. Installation of compressor units, pumps and fans *
23.6. Installation of electrical installations, equipment, automation and signaling systems *
23.7. Installation of equipment for nuclear power plants
23.8. Installation of equipment for cleaning and preparation for transportation of gas and oil
23.9. Installation of equipment for oil and gas pumping stations and for other product pipelines
23.10. Installation of equipment for liquefaction of natural gas
23.11. Installation of gas station equipment
23.12. Installation of equipment for ferrous metallurgy enterprises
23.13. Installation of equipment for non-ferrous metallurgy enterprises
23.14. Installation of equipment for the chemical and oil refining industry
23.15. Installation of mining and mining equipment
23.16. Installation of equipment for railway infrastructure facilities
23.17. Installation of equipment for subways and tunnels
23.18. Installation of equipment for hydroelectric power stations and other hydraulic structures
23.19. Installation of equipment for enterprises of the electrical industry
23.20. Installation of equipment for enterprises of the building materials industry
23.21. Installation of equipment for the pulp and paper industry
23.22. Installation of equipment for textile industry enterprises
23.23. Installation of equipment for printing industry enterprises
23.24. Installation of equipment for food industry enterprises *
23.25. Installation of equipment for theater and entertainment enterprises
23.26. Installation of equipment for grain storage and grain processing enterprises
23.27. Installation of equipment for cinematography enterprises *
23.28. Installation of equipment for enterprises of the electronic industry and communications industry *
23.29. Installation of equipment for healthcare institutions and medical industry enterprises *
23.30. Installation of equipment for agricultural production, including fish processing and fish storage *
23.31. Installation of equipment for consumer services and utilities *
23.32. Installation of water intake equipment, sewerage and treatment facilities
23.33. Installation of equipment for communication facilities *
23.34. Installation of equipment for space infrastructure facilities
23.35. Installation of airport equipment and other aviation infrastructure facilities
23.36. Installation of equipment for sea and river ports
24. Commissioning works
24.1. Commissioning of handling equipment
24.2. Commissioning of elevators
24.3. Commissioning of synchronous generators and excitation systems
24.4. Commissioning of power and measuring transformers
24.5. Commissioning of switching devices
24.6. Commissioning of relay protection devices
24.7. Commissioning of power supply automation *
24.8. Commissioning of voltage and control current systems
24.9. Commissioning of electrical machines and electric drives
24.10. Commissioning of automation systems, signaling and interconnected devices *
24.11. Commissioning of autonomous system adjustment *
24.12. Commissioning of complex system adjustment *
24.13. Commissioning of telemechanics equipment *
24.14. Adjustment of ventilation and air conditioning systems *
24.15. Commissioning of automatic machine lines
24.16. Commissioning of metal-cutting multipurpose CNC machines
24.17. Commissioning of unique metal-cutting machines weighing over 100 tons
24.18. Commissioning of refrigeration units *
24.19. Commissioning of compressor units
24.20. Commissioning of steam boilers
24.21. Commissioning of hot water heating boilers *
24.22. Commissioning of auxiliary boiler equipment *
24.23. Commissioning of water treatment equipment and chemical water treatment equipment
24.24. Commissioning of technological units of the fuel economy
24.25. Commissioning of the gas-air duct
24.26. Commissioning of general boiler systems and utilities
24.27. Commissioning of equipment for processing and finishing wood
24.28. Commissioning of drying plants
24.29. Commissioning of water supply facilities
24.30. Commissioning of sewage facilities
24.31. Commissioning works at the facilities of the oil and gas complex
25. Arrangement of highways and airfields
25.1. Works on the construction of roadbed for highways, aprons of airports, runways, taxiways
25.2. Arrangement of the foundations of highways
25.3. Arrangement of bases for airport aprons, runways, taxiways
25.4. Devices for road surfaces, including those reinforced with binders
25.5. Coating devices for airport aprons, runways, taxiways
25.6. Installation of drainage, drainage, culverts, spillway devices
25.7. Arrangement of protective fences and road construction elements
25.8. Road marking device
26. Arrangement of railway and tram tracks
26.1. Work on the construction of subgrade for railway tracks
26.2. Tramway subgrade construction
26.3. Railway track superstructure device
26.4. Installation of drainage and protective structures of the roadbed of the railway track
26.5. Installation of signaling, centralization and blocking of railways
26.6. Railroad electrification
26.7. Anchoring soils in the railway right-of-way
26.8. Arrangement of level crossings
27. Arrangement of tunnels, subways
27.1. Driving the development of tunnels and subways without the use of special methods of driving
27.2. Roadheading of tunnels and subways using artificial freezing
27.3. Roadheading of tunnels and subways using grouting
27.4. Roadheading of tunnels and subways using electrochemical fastening
27.5. Roadheading of tunnels and subways with the use of drop support
27.6. Installation of internal structures of tunnels and subways
27.7. Subway track device
28. Arrangement of mine structures
28.1. Driving the development of mine structures without the use of special methods of driving
28.2. Driving in mine structures using artificial freezing
28.3. Driving the development of mine structures using grouting
28.4. Roadheading of mine structures using electrochemical fastening
28.5. Driving the development of mine structures with the use of drop support
29. Construction of bridges, overpasses and overpasses
29.1. Installation of monolithic reinforced concrete and concrete structures of bridges, flyovers and overpasses
29.2. Installation of prefabricated reinforced concrete structures for bridges, flyovers and overpasses
29.3. Construction of pedestrian bridges
29.4. Installation of steel superstructures of bridges, flyovers and overpasses
29.5. Construction of wooden bridges, flyovers and overpasses
29.6. Construction of stone bridges, overpasses and overpasses
29.7. Laying culverts on finished foundations (foundations) and drainage trays
30. Hydraulic works, diving works
30.1. Development and movement of soil by water jet and floating dredgers
30.2. Loosening and development of soils under water by a mechanized method and delivery to a dump or floating equipment
30.3. Drilling and arrangement of wells under water
30.4. Piling works carried out in sea conditions from floating equipment, including the installation of shell piles
30.5. Piling works performed in river conditions from floating equipment, including the installation of shell piles
30.6. Construction of structures in sea and river conditions from natural and artificial massifs
30.7. Construction of dams
30.8. Installation, dismantling of building structures in underwater conditions
30.9. Underwater Pipeline Laying
30.10. Underwater cable laying, including electrical and communications
30.11. Diving (underwater construction) work, including quality control of hydraulic works under water
31. Industrial ovens and chimneys
31.1. Blast furnaces
31.2. Masonry of the topside structure of glass furnaces
31.3. Installation of furnaces from prefabricated elements of increased factory readiness
31.4. Electrolyzers for the aluminum industry
31.5. Lining of industrial smoke and ventilation furnaces and pipes
32. Work on the implementation of construction control by a contracted developer or customer on the basis of an agreement by a legal entity or individual entrepreneur
32.1. Construction control over general construction works (groups of types of work (N 1-3, 5-7, 9-14)
32.2. Construction control over well completion works (group of types of work N 4)
32.3. Construction control over drilling and blasting operations (group of types of work N 8)
32.4. Construction control over works in the field of water supply and sewerage (type of work N 15.1, 23.32, 24.29, 24.30, groups of types of work N 16, 17)
32.5. Construction control over work in the field of heat and gas supply and ventilation (types of work N 15.2, 15.3, 15.4, 23.4, 23.5, 24.14, 24.19, 24.20, 24.21, 24.22, 24.24, 24.25, 24.26, groups of types of work N 18, 19.)
32.6. Construction control over works in the field of fire safety (type of work N 12.3, 12.12, 23.6, 24.10-24.12)
32.7. Construction control over work in the field of power supply (type of work N 15.5, 15.6, 23.6, 24.3-24.10, group of types of work N 20)
32.8. Construction control during construction, reconstruction and overhaul of communication facilities (types of work N 23.33, group of types of work N 21)
32.9. Construction control during construction, reconstruction and overhaul of oil and gas industry facilities (type of work N 23.9, 23.10, group of types of work N 22)
32.10. Construction control during the construction, reconstruction and overhaul of highways and airfields, bridges, flyovers and overpasses (type of work N 23.35, groups of types of work N 25, 29)
32.11. Construction control during the arrangement of railway and tram tracks (types of work N 23.16, group of types of work N 26)
32.12. Construction control during construction, reconstruction and overhaul in underground conditions (types of work N 23.17, groups of types of work N 27, 28)
32.13. Construction control over hydraulic engineering and diving works (group of types of work N 30)
32.14. Construction control during construction, reconstruction and overhaul of industrial furnaces and chimneys (group of types of work N 31)
32.15. Construction control during construction, reconstruction and overhaul of nuclear facilities (23.7)
33. Work on the organization of construction, reconstruction and overhaul by a contracted developer or customer on the basis of a contract by a legal entity or an individual entrepreneur (general contractor):
33.1. Industrial engineering
33.1.1. Enterprises and objects of the fuel industry
33.1.2. Enterprises and facilities of the coal industry
33.1.3. Enterprises and objects of ferrous metallurgy
33.1.4. Enterprises and objects of non-ferrous metallurgy
33.1.5. Enterprises and facilities of the chemical and petrochemical industry
33.1.6. Enterprises and objects of mechanical engineering and metalworking
33.1.7. Enterprises and facilities of the forestry, woodworking, pulp and paper industries
33.1.8. Enterprises and objects of light industry *
33.1.9. Enterprises and facilities of the food industry *
33.1.10. Enterprises and objects of agriculture and forestry *
33.1.11. Thermal power plants
33.1.12. Nuclear facilities
33.1.13. Power supply facilities over 110 kV
33.1.14. Oil and gas facilities
33.2. Transport construction
33.2.1. Highways and road transport infrastructure
33.2.2. Railways and railway infrastructure facilities
33.2.3. Airports and other aviation infrastructure facilities
33.2.4. Road and rail tunnels
33.2.5. Subways
33.2.6. Bridges (large and medium)
33.2.7. Businesses and public transport facilities *
33.3. Housing and civil construction
33.4. Power supply facilities up to 110 kV inclusive
33.5. Heat supply facilities
33.6. Gas supply facilities
33.7. Water supply and sewerage facilities
33.8. Buildings and structures of communication facilities
33.9. Marine transport facilities
33.10. River transport facilities
33.11. Hydropower facilities
33.12. Dams, dams, canals, bank protection structures, reservoirs (excluding hydropower facilities)
33.13. Irrigation and drainage facilities
______________________________
* These types and groups of types of work require obtaining a certificate of admission to the types of work affecting the safety of a capital construction facility, in the event that such work is performed at the facilities specified in Article 48.1 of the Urban Planning Code of the Russian Federation
List of species construction works, for the implementation of which it is necessary to obtain an SRO permit
I. Types of engineering survey work
1. Works on the implementation of engineering and geodetic surveys
2. Works on the implementation of engineering and geological surveys
3. Work on the implementation of engineering and hydrometeorological
research
4. Works on the implementation of engineering and environmental surveys
5. Works on the implementation of engineering and geotechnical surveys
6. Works on the inspection of the condition of the soils of the foundations of buildings and
structures, their building structures
II. Types of work on the preparation of project documentation
1. Work on the preparation of a scheme for the planning organization of the land plot
2. Works on the development of architectural solutions
3. Work on the development of constructive and space-planning solutions
4. Work on the preparation of information about engineering equipment, networks of engineering and technical support, a list of engineering and technical measures, the content of technological solutions
5. Work on the preparation of a construction organization project
6. Work on the preparation of a project for the organization of work on the demolition or dismantling of objects
7. Work on the development of measures for environmental protection
8. Work on the development of measures to ensure fire safety
9. Work on the development of measures to ensure access
disabled
10. Work on the preparation of the project of the right-of-way for a linear facility
11. Work on the development of technological and design solutions
line object
12. Works on the preparation of materials related to the provision of
safety of buildings and structures, as part of the section "Other
documentation in cases stipulated by federal laws "
III. Types of construction, reconstruction, overhaul
1. Preparatory work at the construction site
Installation of electric lighting systems for temporary buildings
Installation of temporary protective fences
Construction of crane runways
Single-track track construction
2. Works on demolition of buildings and dismantling of structures
Breaking walls, arrays, ceilings, punching nests
Dismantling of the ground part of industrial buildings
Dismantling of reinforced concrete flights of stairs, platforms and steps
Dismantling of window, door and gate openings, partitions and false ceilings
Dismantling sidewalks, floors, roofing and cladding
Dismantling industrial furnaces
Dismantling of lining of tunnels from cast-iron tubing
Dismantling of metal columns, beams and frames
Dismantling of the contact network supports
3. Works on dewatering, organization of surface runoff and drainage
Construction of water and drainage ditches
Drainage device from trenches and pits when working in wet soils
Closed drainage device
Immersion and removal of wellpoints and sprinkle with filter materials
Assembling and dismantling the suction manifold
Construction of structures made of stone and rock
Backfilling with sand or slag using mechanisms
Construction of subbeds and foundations of sand and gravel
Arrangement of underlays and crushed stone foundations
Installation of drainage layers and filters from crushed stone (coal)
Drainage filters made of gravel and sand
Laying of porous ceramic aerate plates
4. Work on the development of excavations, vertical planning
Excavator excavation in cuts, pits, trenches and dump or embankment
Soil excavation by excavators with loading onto rail or road transport and removal
Development and movement of soil by bulldozers
Development and movement of soil with scrapers
Digging holes in a mechanized way
Development and movement of soil under the influence of hydraulic structures
Paving slopes with stones and slabs with stops
Reinforcement of drainage channels with trays - gutters, boards, shields and mats with heads
5. Works on embankment and backfilling
Backfilling of soil manually with compaction with electric or pneumatic rammers
6. Hydromechanized and dredging works
Development and movement of soil by water jet and floating dredgers
Loosening and development of soils under water by a mechanized method and delivery to a dump or floating equipment
Loosening of soil under water with jackhammers and divers
Loosening of frozen soil with a wedge - a woman, rippers and drilling rigs
Digging trenches with excavator and trencher
7. Blasting operations
Blasting rocky soils, crushing boulders and oversized pieces
Blasting massive soils for release and discharge
Loosening of frozen soils
Shelter of the blasted area to protect structures
Compaction of soil under water by explosions
8. Works on the construction of pile foundations, sheet piles, anchors
Immersion of reinforced concrete piles
Immersion of reinforced concrete sheet piling on quay embankments
Immersion of steel piles in permafrost
Driving and extracting steel and sheet piles
Immersion of wooden and timber-metal piles with arrangement of sheet piling
Installation of bored piles with well drilling and concrete filling of hollow piles
Device for disassembling grooved wooden lintels
Installation of metal guide frames and underwater ties for driving the sheet pile
9. Works on compaction of soils of natural occurrence and arrangement of soil cushions
Leveling the territory of the irrigated area with rolling in a mechanized way
Compaction of soil with heavy rammers
Soil compaction with rollers and soil compactors
10. Work on the construction of drop wells and caissons
Lowering the well with mechanized soil development
Lowering the well manually
11. Work on the erection of structures using the "wall in the ground" method
12. Works on soil consolidation
Thermal strengthening of soils
Cementation of sub-bases with injector blocking
Silicatization and resinization of soils
13. Works on artificial soil freezing
14. Concrete works
Installation of metal mesh formwork
Installation and dismantling of panel formwork
Installation and dismantling of wooden scaffolds, piers and formwork
Installation of reinforcement of monolithic reinforced concrete structures
Installation of reinforcing grids, reinforcing frames, reinforcing trusses, reinforcing structures with a concreted lower belt in hydraulic structures
Installation of anchor bolts and embedded parts
Arrangement of foundations and underlying layers
Construction of rubble and concrete foundations
Construction of concrete columns and post supports
Construction of concrete walls and partitions
Installation of supports, plugging of wells and shafts
Placing concrete under water
Grouting the foundation for equipment
Fastening of walls and vaults of workings with shotcrete - with concrete and sealing of joints in the vaults of frame supports
Preparation of concrete and mortars
Device reinforced concrete foundations, stops, retaining walls, rack supports
Installation of monolithic channels, tunnels, trays, bottoms, galleries
Construction of a sinkhole, thickeners, bathtubs, pools, water supply and sewerage tank structures
Construction of tower-type structures for silos, cooling towers, towers, pipes
Arrangement of reinforced concrete lining of tunnel shafts, mine bottoms, waterproofing cage
Construction of reinforced concrete external and internal walls
Construction of reinforced concrete columns
Construction of reinforced concrete walls, partitions, ventilation ducts
Erection of reinforced concrete beams, belts, lintels, roof and roof structures in horizontally sliding formwork
Placement of concrete mix in blocks of reinforced concrete structures of hydraulic structures
Reinforcement of building structures with reinforced concrete fittings, clips and embankments
Reinforcement and replacement of reinforced concrete pavements
15. Works on installation of prefabricated reinforced concrete and concrete structures
Installation of blocks of external and internal walls of buildings
Installation of concrete ladders
Fastening the shore with concrete massifs
Manufacturing and installation of concrete massifs with transportation
Installation of permanent supports from concrete blocks and stones
Installation of retaining walls, heads, column supports made of concrete blocks
Installation of reinforced concrete foundations for columns, frames, supports
Installation of reinforced concrete columns, capitals, frames, posts and rods
Installation of jumpers
Installation of roof beams and trusses
Installation of wall panels for external and internal walls
Installation of volumetric blocks of residential buildings
Installation of slabs of loggias, balconies, canopies, cornice slabs, sanitary pallets
Installation of small reinforced concrete structures (parapets, sinks, window sills)
Installation of flights of stairs and landings
Installation of elevator shafts and volumetric elements of bins
Installation of partition panels, screens, dividing walls, stiffening diaphragms, ventilation blocks
Plumbing installation
Installation of blocks made of reinforced panel plates, ballast and groove structures
Installation of wall panels for drainage wells, walking yards, silos, mills, TPP bunkers
Installation of wall panels in the construction of linear buildings
Installation of floor slabs and coatings for staircases of thermal power plants, bridges, pipes, platforms, linear buildings
Installation of prefabricated reinforced concrete platforms, girders, consoles, superstructures from floating equipment
Installation of casing and formwork slabs, shells, parapets of quayside embankments and piers
Installation of supports, trays, boxes, blocks, grids when arranging channels and feeders in agricultural buildings
Installation of structures of foundations, retaining walls, heads, bedrock supports during the construction of bridges, power transmission lines and hydraulic structures
Installation of bridge spans from precast concrete structures from the shore
Construction of tunnels in an open way from precast concrete structures
Arrangement of lining of shafts and tunnels from precast reinforced concrete tubing, panels and blocks
Arrangement of stairs and porches with entrance areas
Laying beams and girders
Laying of panels, shells and floor slabs and coverings of single-storey and multi-storey buildings
Laying reinforced concrete culverts under embankments and collectors for laying communications
Laying and replacing steps laid on stringers or a solid base
Laying and covering of tram tracks with railway slabs
Installation of columns, racks, masts, beams and girders of TPPs, open and closed switchgears
Fastening the bottom and slopes with reinforced concrete slabs with thrust beams
Fastening the banks with tetrapods and arrays
Covering roads and shoulders with precast concrete slabs
Installation of refuse chutes made of asbestos-cement pipes with a diameter of 400 mm with inlet valves
16. Works on the installation of metal structures
Installation of frame structures for buildings and structures
Installation of structures for cooling towers, tanks, ventilation and chimneys, coke plants, pipelines, galleries
Installation of drying structures, casings, screens, chambers, hearths, beams, frames, frames, grates and other structures of furnaces, pipes, drying cells
Installation of prefabricated buildings from three-layer aluminum panels
Installation of cab structures made of three-layer aluminum panels for radio relay lines and heat chambers of metal NUP
Installation of structures for suspended and crane tracks
Installation of light tubular roof structures
Installation of structures of gates, stairs, platforms, doors, hatches, manholes
Installation of open structures, switchgears, floodlight masts, antenna systems, waveguide bridges with supports
Installation of window blocks, stained-glass windows, partitions (from aluminum alloys, steel and others)
Constructing buildings from blockboxes
Installation of steel superstructure with assembly and relocation
Installation of mooring bollards
Installation of metal railings for stairs
Installation of gates, gratings, gates, pipelines, bridges, mooring devices and other metal structures of hydraulic structures
Installation of steel fasteners and roller bearings
Installation of keil - fenders and a support ring in the trunks, fixed with cast iron tubing
Construction of suspended ceilings and soundproof walls
Construction and development of permanent and temporary metal supports in mine shafts and tunnels
Corrugated steel decking for underfloor ducts
Cladding of suspended ceilings and cladding of cooling towers with sheets of aluminum alloys
Sheathing of walls and roofing with profile iron or prefabricated panels
Fastening of building structures with building clips, bolts, rings
Extension of cast-iron tubing and installation of a picket ring
17. Works on the installation of wooden structures
Installation of wooden structures, frames, rafters, chairs
Gate installation
Installation of beams, arches, trusses and panels
Installation of visors, backlash - closets, fire boxes, tables
Installation of ryazh, construction and development of slipways
Installation of conductors, ladders, walking boards, barriers
Construction of wooden structures for bridges, flyovers, wheel lines, hydraulic structures
Arrangement of walls from wooden structures and parts
Construction of a wooden bridge deck
Assembly of floors and slabs
18. Works on installation of lightweight enclosing structures
Installation of wood concrete and asbestos-cement slabs and wall panels, coatings
Installation of walls, ceilings, partitions and umbrellas from asbestos-cement sheets on the finished frame
Installation of sprinkler blocks made of asbestos-cement sheets
19. Works on installation of walls from SANDWICH panels and sheet-by-sheet assembly
20. Work on the device of stone structures
Installation of circles and formwork for masonry arches, vaults and walls of industrial furnaces
Installation and dismantling of inventory external and internal scaffolding
Installation of jumpers
Laying of foundations, basement walls, retaining walls, laying of workings with rubble stone
Wall masonry made of ceramic stones
Masonry of limestone structures with facing bricks
Brick laying of channels, pits, stoves, hearths, chimneys with cutting
Brickwork of pillars, arches, gazebos, porticos and other structures made of ordinary bricks
Brick masonry walls made of ordinary clay and sand-lime bricks clad with ceramic bricks
Brick masonry and cladding with ceramic tiles
Installation of partitions made of bricks and ceramic stones
Erection of structures from tuff and diabase blocks
Installation of partitions from piece gypsum and lightweight concrete slabs
21. Works on the shielding of rooms and the device of deformation
Shielding of floors, walls, doors, ceilings with copper or steel sheets and mesh
Sheathing of walls and roofs of workings with sheet steel
Installation of protective steel nets
Upholstery of walls, ceilings and doors with roofing steel on felt with asbestos lining
Sealing horizontal and vertical joints and seams between panels, windows, doors
Embossing of lining seams from tubing and seams between columns and purlins
Construction of expansion and anti-seismic joints
22. Works on the construction and lining of industrial furnaces and chimneys
Installation of circles and formwork for masonry arches, vaults and walls of industrial furnaces
Laying and lining of industrial pipes
Lining of surfaces with heat-resistant and refractory concrete, slabs, refractory mass
Lining of reinforced concrete industrial pipes with acid-resistant bricks
Masonry, lining and lining of furnaces and pipes with refractory products and bricks
Laying of nozzles, filling the hearth with coal mass, installation of anode and hearth blocks
23. Roofing works
Installation of asbestos-cement roofs
Tile roofing with lathing device
Roll roofing device
Roofing made of bituminous mastic with fiberglass mesh or fiberglass
Installation of small roof coverings and lining on facades made of roofing iron
Installation of gutters with overhangs and roof rails
Base priming and vapor barrier
24. Works on waterproofing of building structures
Injection of mortar behind lining of tunnels and mine shafts
Cement screed, gunning, grouting and ironing
Installation of horizontal and lateral waterproofing with cement with liquid glass
Clay side coating waterproofing device
Installation of lateral coating waterproofing of concrete and ceramic structures
Installation of plaster waterproofing with cast asphalt or mastics, resin, varnish
Covering waterproofing device
The device of a continuous curtain of the screen made of hydrorelin and polyethylene film
Insulation device for steel pipelines with bitumen and rubber mastic
Insulation device for steel pipelines with bitumen-polymer mastic
Overlapping and pasting of joints in hydraulic structures with hydroreline
Coating concrete and reinforced concrete pipes with bitumen mastic
25. Work on anti-corrosion protection of building structures and
equipment
Acid-resistant brick, stone, andesite masonry
Covering floors and lining surfaces with acid-resistant bricks
Lining of surfaces with carbon and graphite blocks
Lining of surfaces with acid-resistant plates
Covering and pasting of equipment surfaces with rubber, plastics, sealants, roll materials
Pasting surfaces with sheet asbestos
Electrometallization of surfaces with zinc, aluminum, nichrome and stainless wire
Crushed stone impregnation with mastic "BITUMINOL N-2"
Hydrophobization and surface fluation
Painting surfaces with varnishes, paints, enamels
Fire protection of wooden structures
Fire protection for roof sheathing and decking on trusses
Antiseptic treatment of wooden structures of buildings
26. Works on thermal insulation of building structures, pipelines
and equipment
Insulation of coatings with monolithic aerated concrete
Insulation of hot surfaces with piece and prefabricated thermal insulation products
Insulation of hot surfaces with wrapping materials and packing of heat-insulating fibrous materials
Insulation of hot surfaces with mastics and asbestos-perlite by spraying
Insulation of furnace masonry, boiler surfaces and pipelines with asbestos
Coating the surface of pipeline insulation with asbestos-cement casings, glass cement, fiberglass, fiberglass
Coating the surface of pipeline insulation with sheet metal or aluminum corrugated sheets
Coating the surface of pipeline insulation, wrapping and pasting the insulation with films, fabrics, roll materials
27. Works on the arrangement of internal engineering systems and equipment
Installation of valves, dampers, sealed doors and hatches
Installation of transfer boxes, equipment suction, brackets, stands and anti-vibration bases
Installation of valves, gate valves, check valves, taps and mixers on internal networks
Installation of water metering units
Installation of water heaters and boilers
Installation of expansion joints
Installation of elevator units
Installation of gas stoves
Installation of pressure regulators and reduction
Installation of air heaters and air heaters
Installation of fans and ventilation units
Installation of supply irrigation chambers, maintenance, leveling, recirculation
Installation of heating hot water and steam water boilers
Installation of heating cast-iron sectional steam boilers
Installation of electrical wiring in apartments of residential buildings
Laying of distribution networks in basements, attics, stairwells
Installation of risers in finished ducts on floors with installation of shields
Installation of light shields
Installation of electric stoves
Installation of a lightning rod, cable platform, hatches, steps, a breakout point on the supports and roofs of buildings
Installation of valves
Installation of insulators
Installation of earthing switches
28. Works on installation of external engineering networks and communications
Installation of water supply, sewerage and drainage wells
Arrangement of telephone wells and boxes with inserts, installation of hatches and brackets
Installation of water wells, heads, drainage damper
Installation of foundations and gravel and crushed stone platforms for valve and crane assemblies
The device of drainage funnels and trays in the suction of embankments
Installation of manure channels, cable gutters and trays
Installation of precast concrete gutters
Reinforcement of the site behind the spurs of the damper with prefabricated reinforced concrete slabs
Arrangement of the base and anchors for wooden radio masts
Arrangement of the foundation and anchors of concrete and reinforced concrete for radio masts
Arrangement of complexes of bases and anchors for masts
Installation of block or pile foundations for steel supports of the contact network
Installation of poles for power transmission lines 35-750 kV for feeder lines and automatic blocking lines for wooden
Installation of poles for power transmission lines 35-750 kV for feeder lines and auto-blocking lines of reinforced concrete
Installation of poles for power transmission lines 35-750 kV radio masts and steel radio towers
Installation of poles for 0.4-35 kV power transmission lines of the contact network and industrial electric transport, communication and radio transmission lines of wood
Installation of poles for 0.4-35 kV overhead power lines and industrial electric transport, communication lines and radioactive reinforced concrete
Installation of supports for feeder lines made of asbestos-cement pipes
Installation of reinforced concrete slabs, crossbars and anchors with braces, attachments to the supports
Installation and fastening on the supports of communication lines and radio transmission networks of wooden or steel traverses
Installation of metal braces and braces to the supports
Installation of wooden struts and attachments to the supports
Installation of rigid crossbars, bridges and inspection cradles with crossbars
Installation of wooden radio masts
Installation of reinforced concrete radio masts
Installation of radio masts from asbestos-cement pipes
Installation of foundations and support structures of complete substations
Installation of steel supports for overhead and industrial electric transport
Suspension of wires for power lines and contact lines
Suspension of lightning protection cables
Laying cables in underwater trenches
Installation of disconnectors, arresters, switches on supports of overhead lines and switchgear structures
Installation of a control - measuring column and cathode station
Installation of lightning protection parts for beam and loop grounding
Arrangement of sites for the installation of signal points on embankments with reinforcement with log cabins and reinforced concrete slabs
Grounding device for wooden poles and a typical ground loop
Laying of pipelines from reinforced concrete pressure pipes
Laying of pipelines from asbestos-cement pressure pipes
Laying of pipelines from cast iron pressure pipes
Laying of pipelines from steel pipes with the installation of hydraulic valves, bypasses, candles
Channelless laying of steel pipelines with anti-corrosion, reinforced concrete and bitumen-perlite insulation
Laying channelless pipelines from polyethylene pipes
Tie-in of fittings and tees into existing networks, disconnection and plugging of gas pipelines
Testing of pipelines for strength and tightness with flushing and installation of glands
Suspension of underground utilities when crossing them with a highway
Laying of pipelines from plastic pipes
Laying of pipelines from cast iron sewer pipes
Laying of pipelines from cast iron pressure pipes
Laying of pipelines from steel pipes
Testing hydraulic and pneumatic pipelines
Installation of safety valves, receiving valves, reducing valves
Installation of gate valves and check valves on external water supply networks, district heating, gas supply
Assembly and installation of valve assemblies and linear cranes
Installation of water metering units
Installation of fire hydrants, water columns, travel taps, plungers
Installation of tanks and condensate collectors
Installation of high-speed and capacitive water heaters
Installation of steam and water distribution combs made of steel pipes
Installation of mud collectors and filters
Installation of expansion joints
Installation of steel pipe air traps and air vents and hydraulic seals
Installation of elevator units
Installation of indicating devices (manometers, thermometers, level indicators, air taps)
Installation of gas burners
Installation of filters, scrubbers, cyclones
Installation of centrifugal pumps with piping
Installation of drain and drain funnels
Routing cables fixed with wire rope or staples
Tightening and wiring
Installation of input - switchgear
Installation of step-down transformers
Suspension of fastening of feeders on intermediate, corner and anchor bases
Suspension of wires on pole and rack-mount communication and radio communication lines
Laying of pipelines from steel pipes, with welding of joints and installation of bends
Laying of pipelines from steel pipes with flanges and welded joints from ready-made assemblies and parts
Laying of pipelines from steel pipes in shafts of mines, drainage plants, in hydraulic lifting chambers, slurry pumping stations
Laying of pipelines from aluminum pipes
Aluminum sheet piping
Laying of pipelines from copper, brass pipes
Laying of pipelines from cast iron flanged pipes
Lead pipe laying
Lead sheet piping
Glass pipe laying
Laying of pipelines from plastic pipes
Installation when laying pipelines, filters, water and oil separators, compensators, bypass devices
Installation of valves
Installation of embedded and selected devices for automation systems, fire extinguishing installations, equipment for grease systems
Filling tanks with foaming agent
Tie-in and connection of pipelines into existing pipelines
29. Work on the installation of technological equipment
Installation of equipment for thermal power plants
Installation of heat power equipment
Installation of elements of steam, hot water boilers
Installation of water treatment and water treatment plants
Installation of steam turbine and gas turbine units
Installation of stationary diesel engines and diesel generators
Installation of equipment for nuclear power plants
Installation of equipment for hydroelectric power plants and hydraulic structures
Installation of hydraulic turbines
Installation of generators for hydroelectric power plants
Installation of oil pressure units
Installation of equipment for other hydraulic structures
Installation of metal structures of volute chambers and lining of hydraulic turbines
Installation of mechanisms for lifting, traction cleaning, gates and sluice gates
Installation of equipment for coal and peat industry enterprises
Installation of equipment for the mechanization of preparatory and cleaning works and mining
Installation of underground transport equipment
Installation of equipment for open pit mining
Installation of peat equipment
Installation of crushing and grinding processing and sintering equipment
Installation of crushing and grinding equipment
Installation of equipment for sorting and enrichment
Installation of sinter equipment
Installation of equipment for chemical and oil refining industries
Installation of equipment for enterprises producing nitrogen, ammonia, acids, salts, mineral fertilizers
Installation of equipment for industrial enterprises
synthetic rubber and synthetic alcohol
Installation of equipment for enterprises of the industry of plastics, chemical fibers
Installation of equipment for enterprises of the paint and varnish industry
Installation of equipment for enterprises of the mining and chemical industry, automatic fire extinguishing
Installation of equipment for oxygen industry enterprises
Timber industry equipment installation
Installation of equipment for ferrous metallurgy enterprises
Installation of equipment for the main coke production
Installation of equipment for blast-furnace production of the main
Installation of steelmaking equipment
Installation of continuous casting machines, testing machines, rope, mesh, unwinding and winding machines
Installation of equipment for hardware production of the main
Installation of pipe casting equipment
Installation of equipment for ferroalloy production
Installation of auxiliary equipment for coke, blast-furnace, hardware production (gates, valves, couplings, gates)
Installation of universal tensile testing machines
Installation of equipment for non-ferrous metallurgy enterprises
Installation of general equipment
Installation of equipment for the extraction of non-ferrous metals
Installation of equipment for magnesium workshops
Installation of equipment for processing non-ferrous metals
Installation of equipment for rolling mills
Installation of rolling machines
Installation of pipe-rolling and pipe-welding equipment
Installation of stations and systems of thick and liquid lubricants, oil cleaning machines
Installation of fluid-friction bearings
Installation of metalworking equipment
Installation of metal-cutting machines
Installation of automatic lines for metalworking
Installation of presses
Installation of foundry equipment
Installation of woodworking equipment
Installation of sawmill equipment
Installation of equipment for woodworking and plywood production
Installation of gluing and assembly equipment
Installation of equipment for the production of matches
Installation of equipment for cooper and container production
Installation of equipment for lines for the production of window and door blocks and furniture finishing
Installation of lifting and transport equipment
Installation of cranes
Installation of conveyors, belt, carriage, roller tables, conveyors, bucket elevators, elevators
Installation of hoisting and transport equipment assemblies
Installation of racks
Installation of chains, transition sections, ropes
Installation of ropeway equipment with tests
Installation of safety mesh fences
Installation of elevators, lifting platforms, flat-top lifts, mine cages, loading and unloading devices
Installation of winches and machines for lifting and traction
Installation of equipment for narrow-gauge railway transport
Installation of technological metal structures
Installation of beds, frames, tracks, drives
Installation of cable car ropes
Installation of supporting metal structures
Installation of gates, sluice gates of hydraulic structures
Installation of supports, racks, clamps, frames, embedded elements for equipment
Installation of gutters, ducts, cable blocks, embedded structures from rolled profiles
Installation of technological metal structures of blast-furnace, steel-making production and in mine faces
Installation of pneumatic pipelines from sheet steel
Installation of technological pipelines
Laying of pipelines from steel pipes, with welding of joints and installation of bends
Laying of pipelines from steel pipes with flanges and welded joints from ready-made assemblies and parts
Laying of pipelines from water and gas pipes, ammonia and brine batteries, grease systems, automation systems
Laying of pipelines from steel pipes in the shafts of mines,
drainage installations, in hydraulic lifting chambers, slurry pumping stations
Laying of pipelines from aluminum pipes
Aluminum sheet piping
Laying of pipelines from copper, brass pipes
Laying of pipelines from cast iron flanged pipes
Lead pipe laying
Lead sheet piping
Laying of pipelines from ceramic and porcelain pipes
Glass pipe laying
Laying of pipelines from plastic pipes
Installation when laying pipelines, filters, water and oil separators, compensators, bypass devices
Installation of valves
Installation of embedded and selected devices for automation systems, fire extinguishing installations, equipment for grease systems
Filling tanks with foaming agent
Tie-in and connection of pipelines into existing pipelines
Installation of equipment for enterprises of the building materials industry
Installation of mixing and distributing equipment
Installation of equipment for the production of cement, lightweight aggregates
Installation of equipment for the production of glass, high-quality tableware and fiberglass
Installation of equipment for the production of asbestos-cement products
Installation of equipment for the production of bricks, tiles, ceramic products, cinder blocks and slag granulation
Installation of equipment for the production of gypsum and gypsum products
Installation of equipment for the extraction and processing of facing stone
Installation of equipment for the production of sanitary heating devices
Installation of equipment for the production of reinforced concrete products and products from aerated concrete
Installation of equipment for the manufacture of frames from reinforcing steel
Installation of equipment for the production of lime
Installation of equipment for the production of reed products, chipboards
Installation of equipment for processing mica and asbestos production
Installation of equipment for the pulp and paper industry
Installation of equipment for the preparation of wood raw materials for processing, for the production of cellulose and semi-cellulose
Installation of equipment for the production of paper, cardboard, market pulp and marketable wood pulp
Installation of equipment for processing paper and cardboard into products, for cutting, sorting, packaging and transporting paper, cardboard and cellulose
Installation of equipment for printing industry enterprises
Installation of equipment for the production of forms of text and stereotyped
Installation of equipment for printing, copying and duplicating
Installation of equipment for stitching and binding, for the manufacture and finishing of cardboard and white goods, cardboard production
Installation of equipment for agricultural production
Installation of equipment for collecting and storing milk
Installation of water-lifting equipment, water heaters and drinkers
Installation of feed preparation equipment
Installation of equipment for stalls for cattle and pens for sows
Installation of hoisting and transport equipment
Installation of equipment for growing and keeping poultry
Installation of equipment for a shearing station and crawler farms
Installation of equipment for feeders and conveyors - feed dispensers
Installation of equipment for manure removal
Installation of equipment for grain storage and grain processing enterprises
Installation of equipment for drying and cleaning grain
Installation of equipment for the production of flour and corn
Installation of equipment for the production of animal feed
Installation of equipment for dosing, mixing, sewing
Installation of transport and distribution equipment
Installation of loading and unloading equipment
Installation of other equipment
Installation of equipment for microbiological industry enterprises
Installation of equipment for light industry enterprises
Installation of equipment for leather production enterprises
Installation of equipment for the tanning and extractive industry
Installation of footwear industry equipment
Installation of equipment for the production of auxiliary parts
Installation of equipment for knitting, textile and haberdashery industry
Installation of equipment for the dyeing and finishing knitwear industry
Installation of equipment for the fur industry
Installation of sewing, wet - heat treatment equipment
Installation of equipment for saddlery and saddlery production, leather and haberdashery industry
Installation of equipment for the bristle-brush industry
Installation of equipment for the felting and felt industry
Installation of equipment for the processing of secondary raw materials
Installation of drying and disinfection equipment
Installation of tables for laying, ironing
Installation of equipment for the knitwear industry
Installation of equipment for textile industry enterprises
Installation of weaving equipment
Installation of roving frame, spinning, twisting, jute-kenaf machines
Installation of equipment for finishing textile industries
Installation of equipment for cotton ginning plants and for the processing of cocoon raw materials
Installation of equipment for food industry enterprises
Installation of equipment for the bakery industry
Installation of equipment for the sugar industry
Installation of equipment for meat and poultry processing industry
Installation of equipment for the fishing industry
Installation of equipment for dairy industry enterprises
Installation of equipment for oil and fat industry enterprises
Installation of equipment for enterprises of the canning, poultry concentrate and vegetable drying industry
Installation of equipment for pasta and confectionery industries
Installation of equipment for enterprises of yeast, starch and syrup, wine-making, non-alcoholic industries
Installation of equipment for tobacco and tea enterprises
Installation of equipment for trade and public catering enterprises
Installation of equipment for the production of tin containers
Installation of weighing equipment
Installation of transport, platform, elevator scales
Installation of scales for bulk weighing of bulk materials and dosing
Installation of scales used in the food industry
Installation of equipment for enterprises of the electrical industry
Installation of cable equipment
Installation of equipment for the manufacture of electrical machines
Installation of equipment for the production of chemical power sources
Installation of test equipment
Installation of equipment for painting products
Installation of equipment for the electroceramic industry and for the production of electrical insulating materials
Installation of equipment for the production of light sources
Installation of electrical installations
Installation of power transformers and substation kits
Installation of oil coolers and heat exchangers
Installation of reactors and capacitors
Installation of short-circuits, disconnectors, switches, arresters for voltages up to 750 kV
Installation of current and voltage transformers, step-down, autotransformers
Installation of electrical machines and units with the installation of pantographs
Installation of knife switches, switches, air breakers, plug-in devices
Installation of distribution and lighting shields, terminal boxes and taps
Installation of single-row and double-row panels
Installation of cabinets, consoles, racks and input - distribution devices
Installation of ballast and guide equipment
Installing rechargeable batteries, alkaline batteries with charging
Installation of electric heaters
Installation of electrical appliances
Installation of insulators
Installation of busbar bridges, flexible busbars and sectioning points
Installation of equipment for urban electrified transport networks
Installation of asbestos-cement slabs, walk-through and dividing boards
Installation of earthing switches
Installation of luminaires
Laying of busbars, trolls, busbars, rail of ground loops
Laying of busbars of interbody and trunk busbars
Laying of contact networks for industrial, railway and urban transport
Laying of outdoor lighting networks
Laying of cable networks with the device of couplings and cutting of ends
Internal wiring
Filling electrical equipment with transformer oil and drying it
Covering the cable with bricks or slabs with bedding
Cable alarm device in mines
Transportation of equipment for the electrification of railways
Installation of compressor machines, pumps and fans
Installation of compressor units and expander piston, centrifugal
Installation of ventilation equipment
Installation of general purpose pumping units
Installation of electric ovens
Installation of auxiliary installations
Installation of equipment for enterprises for the repair of household machines and appliances
Installation of machines and installations for washing, ironing and storage of linen
Installation of machines and installations for dry cleaning and dyeing of clothes and carpets
Installation of machines and installations for enterprises for the repair of household machines and appliances
Installation of equipment for gas cleaning
Installation of equipment for electrical and mechanical gas cleaning
Carrying out related work during the installation of electrostatic precipitators
Installation of equipment for electronic industry enterprises and communication facilities
Installation of vacuum equipment
Installation of thermal equipment
Installation of welding equipment
Installation of mechanical processing equipment
Installation of equipment for glass and ceramic production
Installation of equipment for chemical processes
Installation of assembly equipment, general purpose and test
Installation of optical and precision mechanics equipment
Installation of equipment for communication industry enterprises
Installation of signaling, centralization and blocking equipment on railway transport
Installation of equipment for the electric wedge system and route control devices, mechanical centralization and semi-automatic blocking
Installation of equipment for control rooms, electrical interlocking and blocking
Installation of equipment for mechanization, automation of humps and pneumatic mail
Installation of equipment for power supply and cable devices
Installation of communication equipment
Installation of telephone exchanges and switches of the Central Bank, MB, dispatcher, long-distance and office communications
Installation of telephone exchanges and switches of the MB system for director, dispatch and office communications and telephone quasi-telephone stations
Installation of telephone exchanges of rural communications with verification and adjustment
Installation of tripod frames with guards, lighting and alarms
Installation of telephone exchange equipment, including high-frequency communication equipment
Installation of radio stations
Installation of equipment for radio bureaus, radio stations, radio broadcasting nodes
Installation of antenna devices with related work and tuning
Installation of equipment for radio and television centers
Installation of equipment for subways and tunnels
Installation of escalators
Installation of ventilation valves
Installation of communication equipment for mines and railway transport
Installation of electrical alarm, fire, ringing and remote signaling equipment with blocking surfaces
Installation of water cooling stands for transmitters
Installation of doors with electrical and mechanical interlocking contact
Installation of equipment for mechanization of postal communication
Installation of fences
Laying of communication lines and station cables
Laying of wires for station, waveguide
Laying of feeder lines and waveguides
Installation of transformers and feeder loops, systems for maintaining the waveguide under excess pressure
Connection of existing cables with their re-laying without interrupting the operation of subscribers
Pulling the cable out of the sewer
Installation of devices, automation and computer technology
Installation of devices
Installation of indicators, sensors, alarms of various parameters
Installation of equipment for operational control and management, collection and transmission of initial information
Installation of actuators and regulators
Installation of panels, boards, tripods, consoles
Arrangement of pipe and pneumatic cable wiring with associated works
Arrangement of electrical wiring on metal panels and in shields with related work
Installation of power supplies
Installation of laboratory equipment for testing devices
Installation of equipment for specialized control systems and computers
Installation of equipment for healthcare institutions and medical industry enterprises
Installation of sterilization and pharmacy equipment
Installation of equipment for otolaryngological and dental
Installation of equipment for physiotherapy rooms
Installation of equipment for X-ray rooms
Installation of general surgical equipment, for anesthesia, artificial respiration and oxygen therapy
Installation of ophthalmic equipment
Installation of obstetric - gynecological and urological equipment
Installation of equipment for diagnostic research and laboratory
Installation of equipment for hospital, disinfection and disinsection
Installation of equipment for medical industry enterprises
Installation of equipment for theater and entertainment enterprises
Installation of stage equipment
Installation of counterweight plates
Hitching ropes
Installation of sound engineering installations of theater and entertainment enterprises
Installation of equipment for cinematography enterprises
30. Commissioning works
Commissioning of electrical devices
Commissioning of synchronous generators and excitation systems
Commissioning of power and measuring transformers
Commissioning of switching devices
Commissioning of relay protection devices
Commissioning of power supply automation
Commissioning of voltage and control current systems
Commissioning of electrical machines and electric drives
Commissioning of automation systems, signaling and interconnected devices
Commissioning works automated systems management
Commissioning of technical means of ACS
Commissioning of software for computing systems
Commissioning of autonomous system adjustment
Commissioning of complex system adjustment
Commissioning of telemechanics equipment
Commissioning of ventilation and air conditioning systems
Adjustment of ventilation and air conditioning systems
Testing of ventilation and air conditioning systems
Commissioning of handling equipment
Commissioning of lifting and transporting mechanisms of intermittent action
Commissioning of continuous transport mechanisms
Commissioning of metalworking equipment
Commissioning of automatic machine lines
Commissioning of metal-cutting multipurpose CNC machines
Commissioning of metal-cutting machine tools with digital display with CNC
Commissioning of unique metal-cutting machines weighing over 100 tons
Commissioning of other CNC metal-cutting machines
Commissioning of refrigeration and compressor units
Commissioning of refrigeration units
Commissioning of compressor units
Commissioning of heat power equipment
Commissioning of steam boilers
Commissioning of hot water heating boilers
Commissioning of boiler auxiliary equipment
Commissioning of water treatment equipment and chemical water treatment equipment
Commissioning of technological units of the fuel economy
Commissioning of the gas-air duct
Commissioning of general boiler systems and utilities
Commissioning of woodworking equipment
Commissioning of equipment for primary processing of timber and processing of wood for technological raw materials
Commissioning of equipment for processing and finishing wood
Commissioning of drying plants
Commissioning of water supply and sewerage facilities
31. Works on the construction of highways
Construction of unpaved roads covered with sand, crushed stone or gravel
Installation of soil foundations, earthen and crushed stone coverings
Cobblestone and cobblestone paving
Construction of concrete, mosaic, cement, metal-cement coatings
Construction of asphalt concrete and xylolite pavements
Installation of road frame metal and reinforced concrete structures
Installation of road parapet fences on reinforced concrete posts
Manufacturing and installation of wooden railings and fences
Road marking device
32. Works on the construction of railway tracks
Laying of railway tracks of normal gauge with separate elements with post-draft repair and other related works
Laying of normal gauge railway tracks by tracklayers with preparation of links at the base and related work
Laying rails in one thread on a finished base
Laying switches and crossovers on normal track tracks
Placing blind intersections on normal track tracks
Laying temperature expansion joints
Laying on the underwater ballast base of the mounting frame with tracks
Laying reinforced concrete beams with tracks on an underwater ballast base
Laying longitudinal and transverse rail tracks for rolling transformers
Laying of narrow-gauge railway tracks with post-draft repair
Laying switches and crossovers on narrow gauge tracks
Laying blind intersections on narrow gauge tracks
Setting the turntable on narrow gauge tracks
Installation of joints on crushed stone ballast
Installation of turnouts on crushed stone ballast
Installation of road signs, benchmarks, end bends
Arrangement of crossings over narrow-gauge tracks
Construction of crane runways on embankments and waterworks
Arrangement of level crossings over railway tracks of normal gauge
Arrangement of rail or wooden stops
Movement of railway tracks at a distance of up to 2 m
Moving turnouts
Ballasting of railway tracks
33. Underwater works (diving)
Lifting objects out of water
Leveling and vibration compaction of horizontal beds under water by divers
Moving stone under water, excavation of stone and rubble from water
Lowering the metal and reinforced concrete shells of the heads under the water
Installation of mooring barrels on reinforced concrete anchors in the water area
34. Mining works
Mining works
Driving of mine shafts, pits, workings
Shaft sinking in a thixotropic jacket
Driving tunnels, openings, chambers, adits with the device of permanent and temporary intersections
Driving of split furnaces, glades, pits, chambers and expansion of horizontal and inclined workings
Reception and unloading of soil during the passage of mine shafts, adits, tunnels
Entry into and exit from the face of the tunneling shield
The device for fastening the shafts of mines and tunnels with inventory rods and spacers
Arrangement of shale and water barriers
Arrangement of temporary supports and installation of fastening arches
Arrangement and disassembly of shaft reinforcement
Installation and disassembly of wooden fasteners - frames, executions, ties, cladding
Fastening and sheathing of walls and roofs, pits, workings, stairwells with boards, logs and mine racks
35. Work on the construction of wells
Well construction works
Construction and installation of oil and gas wells
Drilling oil and gas wells with testing them for productivity
Installation of filter casing or freezing pipes and devices
Installing a filter on a column of riser pipes
Cementation of the annulus and under-shoe plugging
Well casing with pipes
Fastening the well with reinforced concrete rings
Filter head and water pumping devices
Well equipment transportation
Drilling relief wells
Repair work, as a rule, depending on the frequency of carrying out, is divided into two types: maintenance and overhaul.
List of overhaul works
Lists of types of overhaul works are contained in departmental acts (Provisions, Norms and Rules .., Instructions, Recommendations, etc.). These lists of types of work vary depending on the type of capital construction object, its purpose.
The types of work are given in the annexes to the departmental regulations, the texts of which are given in the attachment to this publication:
Appendix 8. List of works on capital repairs of buildings and structures ( Decree of the USSR State Construction Committee of 12/29/1973 N 279 "On approval of the Regulations on the scheduled preventive maintenance of industrial buildings and structures" (together with "MDS 13-14.2000 ..."))
Appendix N 8. An approximate list of works performed during the overhaul of the housing stock ( Resolution of the State Construction Committee of the Russian Federation of September 27, 2003 N 170 "On approval of the Rules and norms for the technical operation of the housing stock")
Appendix 9. List of works on capital repairs of buildings and structures ( Order of the Ministry of Justice of Russia of September 28, 2001 N 276 (as amended on January 24, 2006) "On approval of instructions for the technical operation of buildings and structures of institutions of the penal system")
Table 2.3. List of overhaul works apartment buildings, subject to inclusion in the scope of work financed from the funds provided for by Federal Law N 185-FZ ( )
Definition of the concept of "overhaul" in the normative legal act
Major overhaul- repairs carried out to restore the technical and economic characteristics of the facility to values close to the design values, with the replacement or restoration of any component parts ( Order of the Gosstroy of the Russian Federation of 13.12.2000 N 285 "On Approval of the Standard Instruction for the Technical Operation of Heating Networks of Communal Heat Supply Systems").
Major overhaul- carrying out a complex of construction work and organizational and technical measures to eliminate physical and moral deterioration, not associated with a change in the main technical and economic indicators of the building and functional purpose, providing for the restoration of its resource with partial replacement, if necessary, of structural elements and systems of engineering equipment, as well as improvement of operational indicators ( Decree of the Government of Moscow of July 30, 2002 N 586-PP (as amended on December 23, 2015) "On approval of the Regulations on a unified procedure for pre-design and design preparation of the construction of engineering communications, structures and road transport facilities in the city of Moscow").
Overhaul of capital construction objects(except for linear objects) - replacement and (or) restoration of building structures of capital construction objects or elements of such structures, with the exception of load-bearing building structures, replacement and (or) restoration of engineering and technical support systems and networks of engineering support of capital construction facilities, or their elements, as well as the replacement of individual elements of load-bearing building structures with similar or other elements that improve the performance of such structures and (or) the restoration of these elements ( (as amended on 06/18/2017)
Overhaul of buildings and structures
Overhaul of buildings and structures includes work on the restoration or replacement of individual parts of buildings (structures) or entire structures, parts and engineering equipment due to their physical wear and tear and destruction for more durable and economical ones that improve their performance ( Resolution of the Gosstroy of Russia of 05.03.2004 N 15/1 (as amended on 16.06.2014) "On approval and implementation of the Methodology for determining the cost of construction products in the Russian Federation" (together with "MDS 81-35.2004 ...")).
Overhaul of the building- a set of construction and organizational and technical measures to eliminate physical and functional (moral) wear and tear, which do not involve changes in the main technical and economic indicators of a building or structure, including, if necessary, the replacement of individual or all structural elements (with the exception of irreplaceable ones) and engineering systems equipment with their modernization. Overhaul does not extend the service life of buildings, since it is determined by the most durable elements that cannot be replaced during repair ( "Methodological recommendations for the formation of the scope of work on the overhaul of apartment buildings financed from the funds provided for by the Federal Law of July 21, 2007 N 185-FZ" On the Fund for Assistance to Reforming Housing and Communal Services "(approved by the State Corporation" Fund for Assistance to Reforming Housing and Communal Services " 02/15/2013)
Overhaul of an apartment building
Major overhaul apartment building - carrying out and (or) providing the works and (or) services provided for by this Federal Law for eliminating faults of worn out structural elements of the common property of owners of premises in an apartment building (hereinafter referred to as common property in an apartment building), including for their restoration or replacement, in in order to improve the operational characteristics of common property in an apartment building ( Article 2 of the Federal Law of July 21, 2007 N 185-FZ (as amended on June 23, 2016) "On the Fund for Assistance to the Reform of the Housing and Communal Services").
Overhaul of the common property of an apartment building: a set of works (services) for the replacement and (or) restoration (repair) of the bearing and (or) functional capacity of structures, parts, engineering and technical support systems, individual elements of the bearing structures of an apartment building that have lost during operation, to similar or other improving indicators up to their standard state, when the volume of such work exceeds the current repair ( )
Overhaul types
Complex and selective overhaul
Overhaul is subdivided into complex overhaul and selective overhaul.
a) is a repair with the replacement of structural elements and engineering equipment and their modernization. It includes work covering the entire building as a whole or its individual sections, which compensates for their physical and functional wear and tear.
b) is a repair with full or partial replacement of individual structural elements of buildings and structures or equipment, aimed at full reimbursement of their physical and partially functional wear and tear.
Attribution to the type of overhaul depends on the technical condition of the buildings assigned for renovation, as well as the quality of their layout and the degree of internal improvement ( "Methodological recommendations for the formation of the scope of work on the overhaul of apartment buildings financed from the funds provided for by the Federal Law of July 21, 2007 N 185-FZ" On the Fund for Assistance to Reforming Housing and Communal Services "(approved by the State Corporation" Fund for Assistance to Reforming Housing and Communal Services " 02/15/2013))
Complex overhaul: replacement, restoration and (or) repair of the common property of an apartment building or its individual parts, made in relation to most of the common property of an apartment building ( "GOST R 51929-2014. National standard of the Russian Federation. Services of housing and communal services and management of apartment buildings. Terms and definitions" (approved and put into effect by the Order of Rosstandart of 11.06.2014 N 543-st)
Complex overhaul- covers all elements of the building, provides for the simultaneous restoration of all worn out structural elements, engineering equipment and an increase in the degree of improvement of the building as a whole, eliminates physical and moral deterioration. Carrying out the next comprehensive overhaul of a building or structure is inexpedient in cases where the demolition or transfer of buildings or structures is planned in connection with the upcoming construction of another building or structure on the site they occupy, reconstruction of the building is planned, the dismantling of the building is planned due to general dilapidation. In these cases, work should be carried out to maintain the structures of the building or structure in a condition that ensures their normal operation during the appropriate period (before demolition or reconstruction) ( )
Selective overhaul: replacement (restoration) of the common property of an apartment building or its individual parts, carried out in relation to a smaller part (some parts) of the common property of an apartment building ( "GOST R 51929-2014. National standard of the Russian Federation. Services of housing and communal services and management of apartment buildings. Terms and definitions" (approved and put into effect by the Order of Rosstandart of 11.06.2014 N 543-st)
Selective overhaul- covers individual structural elements of a building or its engineering equipment, while eliminating physical wear and tear of individual elements and technical systems of the building. Selective overhaul is carried out in cases where a comprehensive overhaul of a building can cause serious interference in the operation of the facility, with significant wear of individual structures that threatens the safety of the remaining parts of the building, with the economic inexpediency of carrying out a comprehensive overhaul according to the restrictions given in the definition of a comprehensive overhaul ( Decree of the Moscow Government dated 09.29.2010 N 849-PP (as amended on 07.07.2015) "On approval of the Regulations for the overhaul of real estate objects located in state property of the city of Moscow and transferred to trust management ")
Emergency overhaul- repair or replacement of all structural elements, devices, systems of engineering equipment that have failed due to accidents, natural disasters, terrorist acts and vandalism ( Resolution of the Moscow Government dated 09.29.2010 N 849-PP (as amended on 07.07.2015) "On approval of the Regulations for the overhaul of real estate objects owned by the city of Moscow and transferred to trust management")
Overhaul of external engineering communications
For overhaul of external engineering communications and improvement facilities include work on the repair of water supply networks, sewerage, heat and gas supply and power supply, landscaping of courtyards, repair of paths, driveways and sidewalks, etc. ( Resolution of the Gosstroy of Russia dated 05.03.2004 N 15/1 (as amended on 16.06.2014) "On the approval and implementation of the Methodology for determining the cost of construction products on the territory of the Russian Federation" (together with "MDS 81-35.2004 ...")
Overhaul of roads
Overhaul of the road- a set of works on the replacement and (or) restoration of structural elements of the highway, road structures and (or) their parts, the implementation of which is carried out within the established permissible values and technical characteristics the class and category of the motor road and, when implemented, the structural and other characteristics of the reliability and safety of the motor road are affected and the boundaries of the right-of-way of the motor road do not change ( Art. 3 of the Federal Law of 08.11.2007 N 257-FZ (as amended on 07.02.2017) "On highways and road activities in the Russian Federation and on amendments to certain legislative acts of the Russian Federation")
Overhaul of the road surface- a complex of works in which the complete restoration and improvement of the working capacity of the pavement and pavement, roadbed and road structures is carried out, worn structures and parts are replaced or replaced with the most durable and durable ones, the geometric parameters of the road are increased taking into account the growth of traffic intensity and axial loads cars within the limits corresponding to the category established for the road being repaired, without increasing the width of the roadbed along the main length of the road ( Order of the Ministry of Housing and Communal Services of the Moscow Region of June 29, 2015 N 125-RV "On Approval of the Rules for the Improvement of the Territory of the Balashikha Urban District of the Moscow Region")
The term of the overhaul. Reasonable time
The timing of the overhaul is either established by the parties, or established by regulatory legal acts (NLA). If there is no indication of the timing of the repair in the contract or regulation, then it is carried out within a reasonable time.
Concept " reasonable time"is traditional for civil law and is mentioned repeatedly in the norms of the Civil Code of the Russian Federation (see Art. 314 of the Civil Code of the Russian Federation, in relation to the relationship of pledge - clause 4 of Art. 345, clause 1 of Art. 358 of the Civil Code of the Russian Federation).
A reasonable time frame for major repairs depends on the condition of the property, its properties, climate characteristics, features of major repairs, technical capabilities and other reasons.
In addition, the normative legal acts may provide for both specific terms for the repair, and the procedure for determining them can be fixed, the frequency of certain types of repair work can be established.
Attachments:
; Appendix 8 to the Decree of the USSR State Construction Committee of 12/29/1973 N 279 "On Approval of the Regulations on the Preventive Maintenance of Industrial Buildings and Structures" (together with "MDS 13-14.2000 ...")
Appendix 8
SCROLL
WORKS ON CAPITAL REPAIRS OF BUILDINGS AND STRUCTURES
A. BUILDINGS
I. Foundations
1. Changing wooden chairs or replacing them with stone or concrete pillars.
2. Partial re-laying (up to 10%), as well as reinforcement of stone foundations and basement walls, not associated with the building superstructure or additional loads from newly installed equipment.
3. Restoration of vertical and horizontal insulation of foundations.
4. Restoration of the existing blind area around the building (more than 20% of the total area of the blind area).
5. Renovation of existing drains around the building.
6. Change of single collapsing stone and concrete pillars.
II. Walls and columns
1. Sealing cracks in brick or stone walls with clearing furrows, with bandaging seams with old masonry.
2. Installation and repair of structures that strengthen stone walls.
3. Re-laying of dilapidated brick cornices, lintels of pit parapets and protruding parts of the walls.
4. Re-laying and repair of separate dilapidated sections of stone walls up to 20% of the total volume of masonry, not associated with the superstructure of the building or additional loads from the newly installed equipment.
5. Reinforcement of reinforced concrete and stone columns with clips.
6. Repair and partial replacement (up to 20% of the total volume) of columns, not associated with additional loads from the newly installed equipment.
7. Change of aggregates in walls with stone, reinforced concrete and metal frames (up to 40%).
8. Change of dilapidated crowns of log or cobbled walls (up to 20% of the total surface of the walls).
9. Solid prokonopatka log or cobblestone walls.
10. Partial change of cladding, backfill and slab heaters of frame walls (up to 50% of the total wall area).
11. Change or repair of plating and insulation of wooden plinths.
12. Repair of stone plinths of wooden walls with their re-laying up to 50% of the total volume.
13. Repositioning and replacement of worn-out clamps of log and cobbled walls.
III. Partitions
1. Repair, change and replacement of worn out partitions with more progressive designs of all types of partitions.
2. During the overhaul of partitions, partial redevelopment is allowed with an increase in the total area of partitions no more than 20%.
IV. Roofs and coverings
1. Change of dilapidated wooden roof trusses or their replacement with prefabricated reinforced concrete.
2. Complete or partial replacement of dilapidated metal and reinforced concrete trusses, as well as replacement of metal trusses with prefabricated reinforced concrete trusses.
3. Strengthening of trusses when replacing the types of coverings (replacing wood slabs with prefabricated reinforced concrete, cold coverings with warm ones, etc.), when suspending lifting devices, as well as during corrosion of units and other elements of metal and prefabricated reinforced concrete trusses.
4. Partial or complete change of rafters, mauerlats and battens.
5. Repair of supporting structures of skylights.
6. Repair of devices for opening bindings of skylights.
7. Partial or complete replacement of worn-out elements of coatings, as well as replacing them with more progressive and durable ones.
8. Partial (over 10% of the total roof area) or continuous change or replacement of all types of roofing.
9. Reconstruction of roofs in connection with the replacement of the roofing material.
10. Partial or complete replacement of wall gutters, slopes and covers of chimneys and other protruding devices above the roof.
V. Interfloor ceilings and floors
1. Repair or change of interfloor floors.
2. Replacement of individual structures or floors as a whole with more progressive and durable structures.
3. Reinforcement of all types of interfloor and attic floors.
4. Partial (more than 10% of the total floor area in the building) or continuous replacement of all types of floors and their bases.
5. Reorganization of floors during repairs with replacement for stronger and more durable materials. In this case, the type of floors must comply with the requirements of the norms and technical conditions for new construction.
Vi. Windows, doors and gates
1. Complete replacement of dilapidated window and door blocks, as well as the gates of industrial buildings.
Vii. Stairs and porches
1. Partial or complete change of landings, ramps and porches.
2. Change and strengthening of all types of stairs and their individual elements.
VIII. Internal plastering, facing
and painting work
1. Renewal of plaster of all premises and repair of plaster in the amount of more than 10% of the total plastered surface.
2. Change of wall cladding in the amount of more than 10% of the total area of the faced surfaces.
3. Continuous anti-corrosion painting of metal structures.
IX. Facades
1. Repair and renewal of cladding with an area of more than 10% of the coated surface.
2. Full or partial (more than 10%) renewal of plaster.
3. Complete renewal of rods, cornices, belts, sandrids, etc.
4. Renewal of stucco details.
5. Solid color with stable compounds.
6. Cleaning the facade with sandblasting machines.
7. Change of balcony slabs and railings.
8. Change of coatings of protruding parts of the building.
1. Complete re-laying of all types of heating stoves, chimneys and their bases.
2. Re-equipment of furnaces for burning coal and gas in them.
3. Complete re-laying of cookers.
XI. Central heating
1. Change of individual sections and units of heating boilers, boilers, boiler units or complete replacement of boiler units (in the event that the boiler unit is not an independent inventory item).
2. Repair and replacement of expanders, condensation traps and other network equipment.
3. Repair and relocation of foundations for boilers.
4. Automation of boiler rooms.
5. Transfer from stove heating to central heating.
6. Change of heating registers.
7. Connection of buildings to heating networks (with a distance from the building to the network no more than 100 m).
XII. Ventilation
1. Partial or complete change of air ducts.
2. Change of fans.
3. Rewind or change electric motors.
4. Change of gates, deflectors, throttle valves, blinds.
5. Partial or complete change of ventilation ducts.
6. Change of heaters.
7. Change of heating units.
8. Change of filters.
9. Change of cyclones.
10. Change of individual chamber designs.
XIII. Plumbing and sewerage
1. Partial or complete change of the pipeline inside the building, including water supply and sewerage outlets.
XIV. Hot water supply
1. Change of coils and boilers.
2. Change of pipeline, parts and pumping units in general, tanks and pipeline insulation.
XV. Electric lighting and communication
1. Change of worn out sections of the network (more than 10%).
2. Change of safety guards.
3. Repair or restoration of cable channels.
4. During major overhaul of the network, it is allowed to replace the luminaires with other types (conventional ones with fluorescent ones).
B. BY STRUCTURES
XVI. Water supply and sewerage facilities
a) Pipelines and network fittings
1. Partial or complete replacement of the anticorrosive insulation of the pipeline.
2. Change of individual sections of the pipeline (due to pipe wear) without changing the diameter of the pipes. At the same time, it is allowed to replace cast iron pipes with steel ones, ceramic ones with concrete or reinforced concrete ones and vice versa, but it is not allowed to replace asbestos-cement pipes with metal ones (except in emergency cases).
3. Replacement of worn fittings, valves, fire hydrants, plungers, valves, water columns or their repair with replacement of worn out parts.
4. Change of individual pipes of siphons.
b) Wells
1. Repair of the cage of wells.
2. Change of hatches.
3. Stuffing the trays again to replace the destroyed ones.
4. Replacement of worn-out wooden wells.
5. Renewal of plaster.
c) Water intakes and hydraulic structures
1. Dams, dams, waterways, canals
1. Change or replacement of fastening of banks or slopes in the amount of up to 50%.
2. Replenishment of swollen slopes of earthen structures.
3. Change of ryazh.
4. Renewal of the protective layer in the underwater parts of reinforced concrete structures.
5. Change of gratings and nets.
6. Repair and replacement of panel gates.
2. Water wells
1. Construction and dismantling of an oil rig or installation and dismantling of an inventory rig.
2. Cleaning the well from collapses and silting.
3. Removing and installing a new filter.
4. Casing the well with a new casing string.
5. Replacement of water-lifting and air pipes.
6. Recovery of the well flow rate by torpedoing or flushing with hydrochloric acid.
7. Cementation of the annular space and drilling out of cement.
d) Treatment facilities
1. Repair and replacement of completely waterproofing.
2. Repair and renewal of plaster and ironwork.
3. Transfer brick walls and partitions up to 20% of the total volume of masonry in the structure.
4. Sealing leaks in reinforced concrete, concrete and stone walls and floors of structures with concrete dismantling in separate places and concreting again.
5. Continuous gunning of the walls of structures.
6. Repair of drainage around structures.
7. Replacement of tank hatches.
8. Replacing the grilles.
9. Replacing the loading of filters, biofilters, aerofilters.
10. Change of filter plates.
11. Replacement of pipelines and fittings.
12. Re-laying of the drainage system of sludge platforms.
XVII. Heating
a) Channels and cameras
1. Partial or complete change of coverings of channels and chambers.
2. Partial or complete change of waterproofing of channels and chambers.
3. Partial re-laying of the walls of brick channels and chambers (up to 20% of the total surface of the walls).
4. Partial relocation of drainage systems.
5. Repair of the bottoms of channels and chambers.
6. Renewal of the protective layer in the reinforced concrete structures of channels and chambers.
7. Change of hatches.
b) Pipelines and fittings
1. Partial or complete replacement of the thermal insulation of the pipeline.
2. Renewal of the waterproofing of the pipeline.
3. Change of individual sections of the pipeline (due to pipe wear) without increasing the diameter of the pipes.
4. Change of fittings, valves, expansion joints or their repair with replacement of worn out parts.
5. Replacement of movable and fixed supports.
XVIII. Access and in-plant railways
a) Subgrade
1. Widening of the subgrade in places of insufficient width to normal size.
2. Treatment of the subgrade in places of landslides, erosion, landslides, abysses.
3. Restoration of all drainage and drainage devices.
4. Restoration of all protective and fortifying structures of the roadbed (sodding, paving, retaining walls).
5. Restoration of regulatory structures.
6. Correction, filling of bridge cones.
7. Change of individual structures of artificial structures or their replacement with other structures, as well as a complete change of pipes and small bridges (if they are not independent inventory objects, but are part of the subgrade).
b) Track superstructure
1. Cleaning the ballast layer or renewing the ballast with bringing the ballast section to the dimensions established by the standards for this type of track.
2. Change of unusable sleepers.
3. Change of worn out rails.
4. Change of unusable fasteners.
5. Straightening curves.
6. Repair of turnouts with replacement of individual elements and transition bars.
7. Change of turnouts.
8. Repair of the bridge deck.
9. Changing the flooring of the level crossings or replacing the wooden one with the reinforced concrete one.
c) Artificial structures (bridges, tunnels, pipes)
1. Partial change of elements or complete replacement of worn out superstructures.
2. Partial re-laying of stone and brick supports (up to 20% of the total volume).
3. Repair of concrete supports (up to 15% of the total).
4. Shotcrete or grouting of the support surface.
5. The device on the supports of reinforcing reinforced concrete shells (shirts).
6. Repair or complete replacement of insulation.
7. Change of bridge beams.
8. Change of anti-theft bars.
9. Change of wood flooring.
10. Change of flooring from reinforced concrete slabs.
11. Change of counter rails.
12. Replacement of damaged elements of wooden bridges, excluding piles.
13. Replacement of wooden packages with reinforced concrete spans.
14. Partial re-laying of stone and brickwork in the arches and walls of the tunnels.
15. Injection cement mortar for the lining of the tunnel.
16. Repair and replacement of drainage devices in tunnels.
17. Repositioning the head of the pipes.
18. Change of elements of wooden pipes (up to 50% of the volume of wood).
19. Change of elements of reinforced concrete or concrete pipes (up to 50% of the volume).
XIX. Car roads
a) Subgrade
1. Treatment of the subgrade in places of landslides, landslides, erosion and depths.
2. Restoration of all drainage and drainage devices.
3. Restoration of all protective and strengthening structures of the roadbed.
4. Change of individual structures of artificial structures or their replacement with other structures, as well as a complete change of pipes and small bridges (if they are not independent inventory objects, but are part of the subgrade or road as a single inventory object).
b) Road clothes
1. Leveling and replacing individual cement-concrete slabs.
2. Laying an asphalt concrete leveling layer on a cement-concrete pavement.
3. Arrangement of asphalt concrete pavement on roads with cement-concrete pavement.
4. Change of cement-concrete pavement to a new one.
5. Strengthening the asphalt concrete pavement.
6. Reconstruction of crushed stone and gravel surfaces.
7. Paving the pavement.
8. Profiling of dirt roads.
c) Bridges, pipes
1. Partial re-laying of stone and brick supports (up to 20% of the total volume).
2. Repair of concrete supports (up to 15% of the total).
3. Replacement of damaged elements of wooden bridges, with the exception of piles.
4. Change of wooden or reinforced concrete flooring, as well as replacement of wooden flooring with reinforced concrete.
5. Complete change or replacement of superstructures.
6. Repositioning of pipe heads.
7. Change of elements of wooden, reinforced concrete or concrete pipes (up to 50% of the volume).
d) Sites for cars, road construction
and other machines, storage areas, as well as sites
grain receiving points
1. Repair and restoration of drainage structures (trays, cuvettes, etc.).
2. Paving cobblestone areas.
3. Reconstruction of crushed stone and gravel pavements.
4. Repair of concrete sites with the laying of a leveling layer of concrete.
5. Leveling and replacing individual cement-concrete slabs.
6. Covering with asphalt concrete sites listed in items 2 - 5.
XX. Electrical networks and communications
1. Change or replacement of unusable fittings.
2. Replacing hooks with traverses.
3. Change of wires.
4. Repair and replacement of end and connecting cable sleeves.
5. Repair or replacement of grounding devices.
6. Change of supports (up to 30% per 1 km).
7. Installation of cable wells.
XXI. Other structures
1. Repair, change or replacement for other supports of overpasses for air laying of pipelines.
2. Repair or change of platforms, ladders and fences of overpasses for air pipeline laying.
3. Repair or replacement of individual columns (up to 20%) of crane trestles.
4. Repair or replacement of crane beams of crane trestles.
5. Repair of galleries and ramps for fuel supply of boiler and gas generator substations with a change (up to 20%) of structures without changing the foundations.
6. Change or complete replacement of wooden fence posts (fences).
7. Repair or replacement of individual concrete and reinforced concrete pillars (up to 20%) and fences (fences).
8. Repair of individual sections of infills between fence posts (up to 40%).
9. Repair of individual sections of solid stone fences (up to 20%).
10. Repair of individual sections of solid adobe fences (up to 40%).
11. Repair of chimneys with the change or replacement of the lining, with the setting of hoops, with the restoration of the protective layer of reinforced concrete pipes.
12. Repair and replacement of individual links of metal chimneys.
13. Repair of ash and slag discharges with complete replacement of individual pipeline links (without increasing the diameter).
14. Repair of loading platforms with a complete change of wood flooring, blind area or asphalt. Change of individual supports or sections of retaining walls (up to 20%). In the event that the unloading platform is part of a warehouse facility (ramp), a complete change or replacement of all structures is allowed.
An indicative list of works performed during the overhaul of the housing stock; Appendix 8 to the Resolution of the Gosstroy of the Russian Federation of September 27, 2003 N 170 "On approval of the Rules and norms for the technical operation of the housing stock"
EXAMPLE LIST
WORKS PERFORMED DURING A CAPITAL REPAIR
HOUSING FUND
1. Inspection of residential buildings (including a complete survey of the housing stock) and the preparation of design estimates (regardless of the period of repair work).
2. Repair and construction work on the change, restoration or replacement of elements of residential buildings (except for the complete replacement of stone and concrete foundations, load-bearing walls and frames).
3. Modernization of residential buildings during their overhaul (redevelopment taking into account the downsizing of multi-room apartments; installation of additional kitchens and sanitary facilities, expansion of living space due to auxiliary premises, improvement of insolation of residential premises, elimination of dark kitchens and entrances to apartments through kitchens with a device, with necessary, built-in or attached premises for staircases, sanitary facilities or kitchens); replacement of stove heating with central heating with the installation of boiler rooms, heat pipelines and heating points; roof and other autonomous heat supply sources; re-equipment of furnaces for burning gas or coal; equipment with systems of cold and hot water supply, sewerage, gas supply with connection to the existing main networks at a distance from the input to the point of connection to the mains up to 150 m, the device of gas ducts, water pumping, boiler rooms; complete replacement existing systems central heating, hot and cold water supply (including with the obligatory use of modernized heating devices and pipelines made of plastic, metal-plastic, etc. and a ban on the installation of steel pipes); installation of household electric stoves instead of gas stoves or kitchen fireplaces; installation of elevators, garbage chutes, pneumatic garbage disposal systems in houses with an elevation of the staircase of the upper floor of 15 m and above; transfer of the existing power supply network to increased voltage; repair of television antennas for collective use, connection to a telephone and radio broadcasting network; installation of intercoms, electric locks, installation of fire-prevention automation and smoke removal systems; automation and dispatching of elevators, heating boilers, heating networks, engineering equipment; improvement of courtyard areas (paving, asphalting, landscaping, fencing, wood sheds, equipment for children and household areas). Repair of roofs, facades, joints of prefabricated buildings up to 50%.
4. Thermal insulation of residential buildings (work to improve the heat-shielding properties of enclosing structures, installation of window fillings with triple glazing, installation of external vestibules).
5. Replacement of intra-quarter utilities.
6. Installation of metering devices for the consumption of heat energy for heating and hot water supply, the consumption of cold and hot water for the building, as well as the installation of apartment meters for hot and cold water (when replacing the networks).
7. Reconstruction of non-ventilated combined roofs.
8. Designer supervision design organizations overhaul of residential buildings with full or partial replacement of floors and redevelopment.
9. Technical supervision in cases when subdivisions for technical supervision of capital repairs of the housing stock have been created in local government bodies and organizations.
10. Repair of built-in rooms in buildings.
List of works on overhaul of buildings and structures; Appendix 9 to the Order of the Ministry of Justice of Russia dated September 28, 2001 N 276 (as amended on January 24, 2006) "On approval of instructions for the technical operation of buildings and structures of institutions of the penal system")
Appendix 9
LIST OF WORKS ON OVERALL REPAIRS OF BUILDINGS AND STRUCTURES
1.1. Foundations.
1.1.1. Changing wooden chairs or replacing them with stone or concrete pillars.
1.1.2. Partial re-laying (up to 15%), as well as reinforcement of foundations and basement walls under the outer and inner walls and pillars of stone and wooden buildings, not associated with the building superstructure or with additional loads from newly installed equipment.
1.1.3. Reinforcement of the foundations for the foundations of stone buildings, not associated with the superstructure of the building.
1.1.4. Restoration of vertical and horizontal insulation of foundations.
1.1.5. Restoration of a settled existing or device of a new blind area around the building (more than 20% of the total area of the blind area) in order to protect the soil under the foundations from erosion or waterlogging.
1.1.6. Repair of the brick cladding of the foundation walls from the basement side in separate places with the re-laying of more than 10 bricks in one place.
1.1.7. Partial or complete restoration or installation of new waterproofing in basements.
1.1.8. Partial or complete re-laying of pits at the windows of the basement and basement floors.
1.1.9. Replacement of rotten wooden foundation chairs in wooden buildings with new wooden, brick, concrete or reinforced concrete pillars.
1.1.10. Renovation of existing drains around the building.
1.1.11. Replacement of single collapsing stone and concrete pillars.
Note. At the expense of funds for major repairs, it is possible to artificially consolidate the soils of the foundations of the foundations by chemical, thermal and other methods.
1.2. Walls and columns.
1.2.1. Re-laying of brick plinths (more than 10 bricks in one place).
1.2.2. Sealing cracks in brick or stone walls with clearing furrows, with bandaging seams with old masonry.
1.2.3. Installation and repair of structures that strengthen stone walls.
1.2.4. Re-laying of dilapidated brick cornices, lintels, parapets, pits and protruding parts of the walls.
1.2.5. Full or partial re-laying and fastening of individual dilapidated sections of brick walls (up to 25% of their total area in the building), not associated with the superstructure of the building or with additional loads from newly installed equipment, as well as the change in wooden buildings of individual crowns, which also do not exceed 25% the common surface of the walls.
1.2.6. Strengthening the walls with tension and metal ties.
1.2.7. Change of fillings in walls with stone, reinforced concrete and metal frames (up to 40%).
1.2.8. Sealing cracks in brick walls with excavation and clearing of old masonry and installation of new ones, with bandaging seams with old masonry.
1.2.9. Restoration of the waterproofing layer of the entire horizontal plane along the edge of the foundation.
1.2.10. Fastening or strengthening stone walls that deviate from the vertical position and have deformations.
1.2.11. Re-laying of dilapidated cornices, parapets, firewalls, pits and protruding parts of the walls.
1.2.12. Repositioning of individual, worn-out, window and door lintels.
1.2.13. Warming of dilapidated wooden walls by stripe boards on the roofing or with additional boarding and backfilling with fine slag.
1.2.14. Partial dismantling of existing internal walls and laying of new ones (up to 25% of the total volume), associated with the redevelopment of premises.
1.2.15. Replacement of various types of aggregates in walls with stone, reinforced concrete and metal frames (up to 50% of the total wall area).
1.2.16. Change of dilapidated crowns of log or cobbled walls (up to 20%).
1.2.17. Solid prokonopatka log or cobbled walls.
1.2.18. Partial change of cladding, backfill and slab insulation of frame walls (up to 50% of the total wall area).
1.2.19. Change or repair of plating and insulation of wooden plinths.
1.2.20. Repair of stone plinths of wooden walls with their re-laying up to 50% of the total volume.
1.2.21. Re-positioning and replacement of worn-out clamps of log and cobbled walls.
1.2.22. Strengthening reinforced concrete and stone columns with clips.
1.2.23. Repair and partial replacement (up to 20%) of columns not associated with additional loads from newly installed equipment.
1.3. Partitions.
1.3.1. Repair, change and replacement of worn out partitions with more progressive designs.
1.3.2. Partial redevelopment with an increase in the total area of partitions (up to 20%).
1.3.3. Repair of partitions with the replacement of unusable straps and boards in an amount of more than 2 m2 in one place.
1.3.4. Strengthening the sound insulation of partitions by upholstering them with an additional layer of hardboard, cardboard or other materials, followed by applying a layer of plaster, wallpapering or painting.
1.3.5. Replenishment of the backfill of two-layer partitions, followed by boarding and all finishing works.
1.4. Roofs and roofs.
1.4.1. Replacement of formwork boards in places of grooves and cornice slopes.
1.4.2. Replacement of dilapidated roof structures with a roof made of ready-made reinforced concrete elements coated with tar paper, roofing felt and other roofing materials.
1.4.3. Full or partial replacement of dilapidated metal and reinforced concrete trusses.
1.4.4. Strengthening of trusses when replacing types of coatings (wood slabs for precast concrete, cold coating for warm ones, etc.), as well as in case of corrosion of units and other elements of metal and precast concrete trusses.
1.4.5. Partial or continuous change of rafters, Mauerlats and roof battens.
1.4.6. Repair or replacement of worn metal roof railings.
1.4.7. Repair or replacement of worn outdoor fire escapes.
1.4.8. Arrangement of new manholes on the roof, skylights and transition bridges to them.
1.4.9. Relocation of chimney and ventilation pipes on the roof.
1.4.10. Complete replacement of dilapidated wall gutters, slopes and coverings around chimneys and other protruding devices above the roof.
1.4.11. Reconstruction of light lanterns with low illumination of premises for a large one.
1.4.12. Repair and painting of supporting structures of skylights.
1.4.13. Repair of mechanical and manual opening and closing devices for light lantern bindings.
1.4.14. Partial or complete replacement of worn-out elements of the coating, as well as replacing them with more progressive and durable ones.
1.4.15. Partial (more than 10%) or complete change or replacement of the roof (all types).
1.4.16. Reconstruction of roofs due to the replacement of roofing materials.
1.4.17. Repair of coatings around smoke and ventilation pipes, firewalls, parapets and other protruding parts on the roof.
1.4.18. Strengthening parapets, steel fencing gratings, repairing ventilation shafts, gas ducts, sewer risers and other protruding parts on the roof.
1.4.19. Restoration and repair of ladders for the safety of cleaning chimneys on roofs with soft surfaces or steep slopes.
1.4.20. Maintenance of outdoor fire escapes for access to the roof.
1.5. Interfloor ceilings and floors.
1.5.1. Repair or change of interfloor and attic floors.
1.5.2. Replacement of individual floor beams, extension of the ends of the beams with prostheses with all subsequent work. Replacing the pick between the beams.
1.5.3. Replacement of individual structures or floors in general with more progressive and durable structures.
1.5.4. Reinforcement of all elements of interfloor and attic floors.
1.5.5. Shotcrete of reinforced concrete floors in case of damage.
1.5.6. Partial (more than 10%) or continuous change of sexes (all types) and their bases.
1.5.7. Reconstruction of floors during repairs with replacement for stronger and more durable ones, while the type of floors must comply with the requirements of norms and technical conditions for new construction.
1.5.8. Reconstruction of the concrete base under the floors with the installation of a new floor.
1.5.9. Re-laying of clean plank floors with leveling of the logs and adding new material.
1.5.10. Re-laying of parquet floors with fixing or replacing the battens.
1.5.11. Re-laying of floors on joists in the first floors with correction or replacement of the base and restoration of brick posts.
1.5.12. Repair or replacement of walls of underground channels.
1.6. Windows, doors and gates.
1.6.1. Complete replacement of dilapidated window and door blocks, as well as gates.
1.7. Stairs and porches.
1.7.1. Partial or complete change of landings, ramps and porches.
1.7.2. Change or strengthening of all types of stairs and their individual elements.
1.7.3. Replacement or repair of handrails and handrails of stairs over 5% of their total.
1.7.4. Arrangement of new porches.
1.7.5. Change of metal stringers or welding of damaged parts of stringers.
1.8. Internal plastering, facing and painting works.
1.8.1. Renewal of plaster of all premises and repair of plaster in the amount of more than 10% of the total plastered surface.
1.8.2. Upholstery of walls and ceilings with dry plaster.
1.8.3. Restoration or replacement of wall cladding in the amount of more than 10% of the total area of cladding surfaces.
1.8.4. Renewal of stucco details inside the premises.
1.8.5. Painting of window sashes, doors, ceilings, walls and floors after overhaul of these structures.
1.8.6. Oil painting of radiators, heating pipes, water supply, sewerage, gasification after overhaul of the system or new installation of it, if the costs are carried out at the expense of overhaul funds.
1.8.7. Continuous anti-corrosion painting of metal structures.
1.9. Facades.
1.9.1. Repair and renewal of cladding with an area of more than 10% of the cladded surface of the facades of buildings with the replacement of individual tiles with new ones or plastering of these places with subsequent painting to match the color of the facing slabs.
1.9.2. Full or partial (more than 10%) renewal of plaster.
1.9.3. Restoration or alteration of rods, cornices, belts, sandrids and other protruding parts of building facades.
1.9.4. Complete replacement and installation of new drainpipes, as well as all external metal and cement coatings on the protruding parts of the facades of buildings.
1.9.5. Restoration of modeling and stucco decorations and details.
1.9.6. Continuous painting of building facades with stable compounds.
1.9.7. Change or installation of new gratings and fences on the roofs and balconies of buildings.
1.9.8. Cleaning of facades and plinths with sandblasting machines.
1.9.9. Change or reinforcement of all supporting and enclosing structures of balconies and bay windows.
1.9.10. Change of coatings of protruding parts of the building.
1.9.11. Restoration of old or installation of new gates.
1.9.12. Oil painting of facades of wooden buildings.
1.10. Stoves and hearths.
1.10.1. Repair, alteration and installation of new stoves, kitchen hearths, embedded boilers and chimneys for them.
1.10.2. Complete re-laying or installation of new heating stoves, chimneys, ventilation ducts and chimneys and their foundations.
1.10.3. Conversion of heating stoves from wood-burning to gas heating or to heating with solid fuel.
1.11. Central heating.
1.11.1. Installation of central heating instead of the stove with the adaptation of the existing room for the boiler room and installation of the boiler room. In some cases, if it is impossible to adapt the existing premises to the boiler room, it is allowed to add an extension to the existing building with a building area of not more than 65 m2 or to build a new boiler room building.
1.11.2. Change of individual sections and assemblies of heating boilers, boilers, boiler units or complete replacement of boiler units (if they are not independent inventory items).
1.11.3. Replacement of the existing central heating piping.
1.11.4. Repair and replacement of expanders, condensation traps and other network equipment.
1.11.5. Arrangement of external furnaces and accessories for boilers for a blast furnace.
1.11.6. Change and re-installation of additional sections of heating devices and individual sections of the pipeline.
1.11.7. Repair, relocation or re-installation of foundations for boilers and other equipment.
1.11.8. Boiler room automation.
1.11.9. Change of insulation of pipelines that have fallen into disrepair.
1.11.10. Repositioning the lining of the boiler and chimneys.
1.11.11. Placing patches on a steel boiler, boiler, steam boiler, tank.
1.11.12. Manufacturing and installation of a new casing.
1.11.13. Restoration or installation of new lining and lining of central heating boilers.
1.11.14. Replacement of worn-out metal chimneys from boiler rooms.
1.11.15. Change of heating registers.
1.11.16. Connection of buildings to heating networks (with a distance from the building to the network no more than 100 m).
1.12. Ventilation.
1.12.1. The device of a new, restoration or reconstruction of the ventilation system.
1.12.2. Partial or complete change of air ducts.
1.12.3. Change of fans.
1.12.4. Rewind or change electric motors.
1.12.5. Change of gates, deflectors, throttle valves, blinds.
1.12.6. Partial or complete change of ventilation ducts.
1.12.7. Change of heaters.
1.12.8. Change of heating units.
1.12.9. Change of filters.
1.12.10. Change of cyclones.
1.12.11. Change of individual designs of ventilation chambers.
1.13. Plumbing and sewerage.
1.13.1. Restoration or installation of a new internal water supply and sewerage system of the building, pipelines, including water supply and sewerage inlets and their connection to the water supply and sewerage networks. The length of the line from the nearest water supply or sewer outlet to the street network should not exceed 100 m.
1.13.2. Installation of new indoor water intakes.
1.13.3. Installation of additional inspection chambers on existing yard lines or street networks at the points of connection.
1.13.4. Relocation of underground water and sewer pipes.
1.13.5. Replacement of cast-iron lavatory cisterns with flush taps with alteration of the piping and shortening of the flush pipe.
1.13.6. Replacement of taps, valves and sanitary fittings.
1.13.7. The device of water pumps.
1.13.8. Installation of new sanitary facilities.
1.14. Hot water supply.
1.14.1. Change and installation of new hot water supply.
1.14.2. Change of individual sections of the hot water supply pipeline.
1.14.3. Replacement of worn-out tanks, water heaters and water heaters.
1.14.4. Repair of tanks, coils and boilers, associated with complete disassembly and replacement of individual units and parts.
1.14.5. Change of pipeline, parts and pumping units in general, tanks and pipeline insulation.
1.14.6. Change and installation of baths, showers and fittings for them (shower nets with piping, water taps, flexible hoses).
1.15. Electric lighting, communications and power wiring.
1.15.1. Installation of new electric lighting in residential and public buildings and connection to the power supply network.
1.15.2. Replacement of worn-out lighting electrical wiring with the change of installation fittings (switches, knife switches, plugs, sockets, sockets), and during a major overhaul of the building - the installation of a new electrical wiring.
1.15.3. Installation of new and replacement of group distribution and safety boxes and shields.
1.15.4. Reconstruction of the electrical wiring with the installation of additional fittings in connection with the redevelopment of the premises.
1.15.5. Automation of electric lighting in the stairwells of buildings.
1.15.6. Replacement of metering devices and protection devices for electrical installations.
1.15.7. Repair or restoration of cable channels.
1.15.8. Replacement of luminaires with other types (conventional for fluorescent, etc.).
1.16. Gas supply.
1.16.1. Installation of additional gas equipment in apartments with its connection to the gas network.
1.16.2. Gasification of individual apartments.
1.16.3. Change of individual sections of the gas pipeline.
1.16.4. Replacement of worn-out equipment (gas stoves, water heaters) with new equipment.
1.17. Elevators and lifts.
1.17.1. Re-installation of elevators with all types of construction and installation work.
1.17.2. Full or partial replacement of electrical equipment and elevator cargo winches.
1.17.3. Reinforcement, full or partial change of metal structures and mine enclosing nets.
1.17.4. Complete or partial change of electrical wiring in mines.
1.17.5. Dismantling and installation of elevator equipment in connection with work to reduce noise in rooms with constant presence of people.
1.17.6. Elevator automation.
2. Structures
2.1. Water supply and sewerage facilities. Pipelines and network fittings.
2.1.1. Partial or complete replacement of the anticorrosive insulation of the pipeline.
2.1.2. Change of individual sections of the pipeline without changing the diameter of the pipes. At the same time, it is allowed to replace cast iron pipes with steel ones, ceramic ones with concrete or reinforced concrete ones and vice versa, but it is not allowed to replace asbestos-cement pipes with metal ones (except in emergency cases).
The length of the network sections, on which a continuous change of pipes is allowed, should not exceed 200 m per 1 km of the network.
2.1.3. Change of worn out fittings, valves, fire hydrants, plungers, valves, water columns or their repair with replacement of worn out parts.
2.1.4. Change of individual pipes of siphons.
2.2. Water supply and sewerage networks. Wells.
2.2.1. Well masonry repair.
2.2.2. Change of hatches.
2.2.3. Stuffing the trays again to replace the destroyed ones.
2.2.4. Replacement of worn out wooden wells.
2.2.5. Renewal of plaster.
2.3. Water supply and sewerage networks. Treatment facilities.
2.3.1. Repair or replacement (completely) of waterproofing.
2.3.2. Repair and renewal of plaster and ironwork.
2.3.3. Re-laying of brick walls and partitions (up to 20% of the total volume of masonry in the structure).
2.3.4. Sealing leaks in reinforced concrete, concrete and stone walls and floors of structures with concrete dismantling in separate places and concreting again.
2.3.5. Continuous gunning of the walls of structures.
2.3.6. Repair of drainage around structures.
2.3.7. Replacement of tank hatches.
2.3.8. Replacement of grilles.
2.3.9. Replacing the loading of filters, biofilters, aerofilters.
2.3.10. Replacement of pipelines and fittings.
2.3.11. Change of filter plates.
2.3.12. Re-laying of the drainage system of sludge platforms.
2.4. Heating. Channels and cameras.
2.4.1. Partial or complete change of coverings of channels and chambers.
2.4.2. Partial or complete change of waterproofing of channels and chambers.
2.4.3. Partial re-laying of the walls of brick channels and chambers (up to 20% of the total surface of the walls).
2.4.4. Partial relocation of drainage systems.
2.4.5. Repair of the bottoms of canals and chambers.
2.4.6. Renewal of the protective layer in the reinforced concrete structures of channels and chambers.
2.4.7. Change of hatches.
2.5. Heating. Pipelines and fittings.
2.5.1. Partial or complete replacement of the thermal insulation of the pipeline.
2.5.2. Renewal of waterproofing pipelines.
2.5.3. Change of individual sections of the pipeline without increasing the diameter of the pipes.
2.5.4. Change of fittings, valves, expansion joints or their repair with replacement of worn out parts.
2.5.5. Replacement of movable and fixed supports.
2.6. Car roads. Earthen bed.
2.6.1. Treatment of subgrade in places of landslides, landslides, erosion and depths.
2.6.2. Restoration of drainage and drainage devices.
2.6.3. Restoration of protective and strengthening structures of the roadbed.
2.6.4. Change of individual structures of artificial structures or their replacement with other structures, as well as a complete change of pipes and small bridges (if they are not independent inventory objects, but are part of the subgrade or road as a single inventory object).
2.7. Car roads. Travel clothing.
2.7.1. Leveling and replacing individual cement-concrete slabs.
2.7.2. Laying of an asphalt concrete leveling layer on a cement-concrete pavement.
2.7.3. Installation of asphalt concrete pavement on roads with cement-concrete pavement.
2.7.4. Change of cement-concrete pavement to a new one.
2.7.5. Strengthening the asphalt concrete pavement.
2.7.6. Reconstruction of crushed stone and gravel surfaces.
2.7.7. Paving the pavement.
2.7.8. Profiling of dirt roads.
2.8. Warehouse and other sites.
2.8.1. Repair and restoration of drainage structures (trays, cuvettes, etc.).
2.8.2. Paving cobblestone areas.
2.8.3. Reconstruction of crushed stone and gravel surfaces of sites.
2.8.4. Repair of concrete sites with the laying of a leveling layer of concrete.
2.8.5. Leveling and replacing individual cement-concrete sites.
2.8.6. Coverage of sites with asphalt concrete.
2.9. Electrical networks and communications.
2.9.1. Change or replacement of fittings.
2.9.2. Replacing hooks with traverses.
2.9.3. Change of wires.
2.9.4. Repair and replacement of end and connecting cable couplings.
2.9.5. Repair or replacement of grounding devices.
2.9.6. Change of supports (up to 30% per 1 km).
2.9.7. Installation of cable wells.
2.10. Other structures.
2.10.1. Repair, change or replacement for other supports of overpasses for air laying of pipelines.
2.10.2. Repair and replacement of platforms, stairs and fences of overpasses for air pipelines.
2.10.3. Repair or replacement of individual columns (up to 20%) of crane trestles.
2.10.4. Repair or replacement of crane beams of crane trestles.
2.10.5. Repair of galleries and ramps for fuel supply of boiler houses and gas generator substations with a change (up to 20%) of structures without changing the foundations.
2.10.6. Change or complete replacement of wooden fence posts.
2.10.7. Repair or replacement of individual concrete and reinforced concrete pillars (up to 20%) of fences.
2.10.8. Repair of individual sections of fencing elements (up to 40% infill between posts).
2.10.9. Repair of individual sections of solid stone fences (up to 20%).
2.10.10. Repair of individual sections of solid adobe fences (up to 40%).
2.10.11. Repair of chimneys with the change or replacement of the lining, with the setting of hoops, with the restoration of the protective layer of reinforced concrete pipes.
2.10.12. Repair and replacement of individual links of metal chimneys.
2.16.13. Repair of ash and slag discharges with complete replacement of individual pipeline links (without increasing the diameter).
2.12.14. Repair of loading platforms with a complete change of wood flooring, blind area or asphalt. Change of individual supports or sections of retaining walls (up to 20%). If the unloading area is part of a warehouse facility (ramp), a complete change or replacement of all structures is allowed.
The list of work on the overhaul of apartment buildings to be included in the scope of work financed from the funds provided for by Federal Law N 185-FZ; Table 2.3 ( "Methodological recommendations for the formation of the scope of work on the overhaul of apartment buildings financed from the funds provided for by the Federal Law of July 21, 2007 N 185-FZ" On the Fund for Assistance to Reforming Housing and Communal Services "(approved by the State Corporation" Fund for Assistance to Reforming Housing and Communal Services " 02/15/2013)
This list was formed on the basis of the revised lists of capital repairs recommended by the above regulatory documents within the framework of the types of capital repairs of apartment buildings defined by Article 15 of Federal Law N 185-FZ. At the same time, it is assumed that the provisions of these guidelines apply to apartment buildings subject to major repairs without stopping their operation. As a result of the overhaul, all necessary work to bring the common property of an apartment building into a technically sound state by restoring or replacing all parts of structures and engineering systems that have shorter service lives between successive (in terms of the standard service life) major overhauls than the supporting structures.
2.3.2. Consistent and methodical linking technological processes the list of works given in Table 2.3 of these recommendations is contained in Section 3.
Table 2.3
The name of the types of work in accordance with Part 3 of Article 15 of Federal Law N 185-FZ |
Subspecies and list of works |
|
Repair of in-house engineering systems of electrical, heat, gas, water supply, sewerage |
1. Repair or replacement of engineering systems: |
|
1.1. Cold water supply, including: |
||
1.1.1. Repair or replacement of water metering units; |
||
1.1.2. Repair or replacement of distribution lines and risers; |
||
1.1.3. Replacement of shut-off valves, including on the branch from the risers to the apartment; |
||
1.1.4. Repair or replacement in the complex of equipment for booster pumping units |
||
1.1.5. Repair or replacement of equipment, pipelines and fittings of a fire water supply system |
||
1.2. Repair or replacement of the hot water supply system, including: |
||
1.2.1. Repair or replacement of TRZh, heat exchangers, boilers, pumping units and other equipment (as part of common property) in the complex for the preparation and supply of hot water to the distribution network; |
||
1.2.2. Repair or replacement of distribution lines and risers; |
||
1.2.3. Replacement of shut-off valves, including on the branch from the risers to the apartment. |
||
1.3. Repair or replacement of the sewerage and drainage system, including: |
||
1.3.1. Repair or replacement of outlets, prefabricated pipelines, risers and hoods; |
||
1.3.2. Replacement of valves, if any; |
||
1.4. Repair or replacement of the heating system, including; |
||
1.4.1. Repair or replacement of distribution lines and risers; |
||
1.4.2. Replacement of shut-off and control valves, including on the branch from risers to heating devices in residential premises; |
||
1.4.3. Rearrangement or replacement of heating devices in public places and replacement of heating devices in residential premises that do not have disconnecting devices; |
||
1.4.4. Installation, repair or replacement in the complex of ITP equipment (individual heating points) and in the presence of booster pumping units |
||
1.5. Repair or replacement of the gas supply system, including: |
||
1.5.1. Repair or replacement of in-house distribution lines and risers; |
||
1.5.2. Replacement of shut-off and control valves, including on the branch from risers to household gas appliances in residential premises; |
||
1.6. Repair or replacement of the power supply system, including: |
||
1.6.1. Repair or replacement of the main switchboard (main switchboard), distribution and group boards; |
||
1.6.2. Repair or replacement of in-house distribution highways and risers of communal and apartment lighting; |
||
1.6.3. Replacement of branches from floor panels or boxes of apartment meters and installation and lighting devices for communal lighting; |
||
1.6.4. Replacement of electrical networks to power the electrical equipment of elevators and electrical equipment to ensure the operation of engineering systems; |
||
2. Modernization of engineering systems, including: |
||
2.1. Mandatory use of modernized heating devices and pipelines made of plastic, metal-plastic, etc. and a ban on the installation of steel pipes |
||
2.2. Transfer of the existing power supply network to increased voltage; |
||
2.3. Replacement of lighting devices for the needs of municipal lighting with energy-saving ones; |
||
2.4. Re-equipment of heat points and water metering units; |
||
3. Replacing stove heating with central heating with device boiler rooms, heat pipelines and heat points; roof and other autonomous heat supply sources |
||
4. Equipment by systems cold and hot water supply, sewers, gas supply with accession to existing backbone networks with a distance from the input to the point of connection to the highways up to 150 m, device gas ducts, water pump, boiler rooms. |
||
Repair or replacement of elevator equipment found unsuitable for operation, if necessary, repair of elevator shafts |
Repair and replacement of elevator equipment with its modernization, including: |
|
1. Repair or complete replacement of elevator equipment found unsuitable for use; |
||
2. Repair, if necessary, of mines, replacement of attached mines; |
||
3. Repair of machine rooms; |
||
4. Repair, replacement of automation elements and dispatching of elevator equipment; |
||
5. Equipment of devices required for connection to existing systems, automation and dispatching of elevator equipment |
||
Roof repair |
1. Repair of roof structures: |
|
1.1. From wooden structures: |
||
1.1.1. Repair: with partial replacement Rafter legs Mauerlatov Solid and discharged battens made of bars |
||
1.1.2. Antiseptic and fireproofing of wooden structures. |
||
1.1.3. Insulation of the under-roof (attic) floor |
||
1.1.4. Repair (replacement of dormer windows) |
||
1.2. From reinforced concrete rafters and roof decks: |
||
1.2.1. Elimination of malfunctions of reinforced concrete rafters and roof decks; |
||
1.2.2. Insulation of the under-roof (attic) floor |
||
1.2.3. Repair of screed for roofing; |
||
2. Replacement of roof coverings |
||
2.1. Complete replacement of the metal roof covering with the device of abutments; |
||
2.2. Complete replacement of a roof covering made of rolled bitumen materials (roofing felt) on a roof made of welded materials with a device for abutments |
||
2.3. Complete replacement of the roof covering made of piece materials (slate, tiles, etc.) with an abutment device |
||
3. Repair or replacement of the drainage system (overhangs, gutters, gutters, trays) with the replacement of drainpipes and products (external and internal); |
||
4. Repair or replacement of roof elements |
||
4.1. Repair of manholes on the roof |
||
4.2. Repair of air vents, repair or replacement of dormers and other devices for ventilation of the attic space; |
||
4.3. Change of caps on the tops of smoke ventilation blocks and ventilation mines; |
||
4.4. Change of coverings of parapets, firewalls, add-ons |
||
4.5. Repair (plastering, painting) and insulation of smoke ventilation blocks and elevator shafts |
||
4.6. Restoration or replacement of the fencing on the attic roof; |
||
5. Reconstruction of non-ventilated combined roofs to ventilated ones with insulation of the under-roof (attic) overlap |
||
Repair of basements related to common property in apartment buildings |
1. Repair of sections of basement walls and floors |
|
2. Insulation of walls and basement ceilings of basements |
||
3. Waterproofing walls and basement floor |
||
4. Repair of technical rooms with the installation of metal doors. |
||
5. Repair of air vents, basement windows, pits and external doors |
||
6. Sealing of passages of inputs and outputs of engineering networks in the outer walls (performed when repairing networks) |
||
7. Repair of the blind area |
||
8. Repair or replacement of the drainage system |
||
Insulation and repair of facades |
1. Repair of facades that do not require insulation |
|
1.1. Repair of plaster (textured layer), including an architectural order; |
||
1.2. Repair of facing tiles; |
||
1.3. Painting over plaster or textured layer; |
||
1.4. Repair and restoration of sealing of horizontal and vertical joints of wall panels of large-block and large-panel buildings; |
||
1.5. Repair and restoration from the side of the facade of sealing the joints of window and door openings in public places; |
||
1.6. Painting from the side of the facade of the window frames; |
||
1.7. Repair of enclosing walls; |
||
1.8. Repair and replacement of windows and balcony doors (as part of common property); |
||
1.9. Repair or replacement of external entrance doors. |
||
2. Works on the repair of facades requiring insulation |
||
2.1. Repair and insulation of enclosing walls with subsequent surface finishing |
||
2.2. Repair of windows and balcony doors (as part of common property) or replacement with windows and doors in an energy-saving design (window blocks with triple glazing, etc.) with their subsequent insulation (sealing) |
||
2.3. Repair of external entrance doors with their subsequent insulation or replacement with metal doors in an energy-saving design |
||
3. Works common for both groups of buildings |
||
3.1. Repair of balconies with replacement, if necessary, of consoles, waterproofing and sealing, followed by painting |
||
3.2. Reinforcement of canopy structures above entrances and top floors with subsequent surface finishing |
||
3.3. Reinforcement of eaves block structures with subsequent surface finishing |
||
3.4. Change of window sills |
||
3.5. Change of drainpipes |
||
3.6. Repair and insulation of the basement |
||
Installation of collective (common house) resource consumption meters and control units (heat energy, hot and cold water, electricity, gas) |
Installation of collective (common house) consumption meters: Thermal energy for heating and hot water supply; Consumption of cold water, Electric energy, Resource control nodes, with equipment for automation and dispatching devices to provide remote accounting and control; |
|
Repair of the foundations of apartment buildings. |
1. Work on the repair or replacement of foundations. |
|
1.1. Sealing and jointing of joints, seams, cracks in foundation elements. Protective layer device. |
||
1.2. Elimination of local defects and deformations by strengthening the foundation. |
Notes:
1. During overhaul of structures and engineering systems as part of the common property of an apartment building, as defined by Federal Law 185-FZ, at least 50% of each structure and engineering system is replaced.
2. Household heating systems as part of common property include: risers, heating elements in common areas, in residential premises - branches from risers to the first disconnecting device (in its absence - to the place of interface with a heating device, heating element), regulating and shut-off valves; collective (general house) heat energy metering devices, as well as other equipment located on these networks.
3. In the event that during the overhaul of structures and engineering systems as part of the common property of MD, due to the technological and design features of the structures and engineering systems being repaired, it is necessary to dismantle or destroy parts of the property that is not part of the common property of MD , work on its restoration is carried out at the expense of capital repairs, which should be provided for in the design and estimate documentation.
4. In the event that a heating system with a hidden pipeline laying is designed in an apartment building, which is not repairable (Appendix 2), during the overhaul, it is allowed to re-install the heating system with an open laying of pipelines and heating devices, heating elements, including in living quarters.