Layout of apartments 97 series with dimensions. Additional equipment and services

History

Large-pointed 97 series of houses is designed in the city of Novosibirsk Institute "SibZNIIEP" in 1971. At one time, she was recognized as one of the best in the country on planning parameters and economy.Buildings of the 97th series, unlike the previous typical, gave significant possibilities of urban-planning maneuverability in the formation of microdistrict, allowed to increase the layout of the development.

The first residential buildings of the 97th series in Krasnoyarsk were put into operation in 1974 on the streets of Shevchenko, Krasnodar, Khabarovsk, Republic and Metallurgists.

The new standard of planning people in the people after some time dubbed the "new" layout.

The mass construction of this series in Krasnoyarsk began in the early 1980s during the development of new residential areas "Northern", "Sunny", the district of Kopylov Street and some others. The houses were erected in almost all parts of the city.

In 2000, the series has undergone significant upgrades.Exterior wall panels, slabs of overlappings, roofing panels were significantly processed, linse of the attic and other elements. As a result, gray buildings received new, individual facades, a large number planning solutions and increased floors.

Currently, houses based on this series are built in large quantities. Buildingthey became diverse and more spectacular outside, more comfortable inside. There was a wide variety of 1-3 room planning planners. But, unfortunately, some developers refused to build 4-room apartments, and now, when there are 2 or more children in many families, there is a clear deficit of such apartments in the Krasnoyarsk real estate market.

Characteristics of the 111-97 series

Residential buildings built on the basis of the 97th series from the mid-1970s until the end of the 1990s have a small and limited number of layouts. So, 1-room apartments here - 36-41 sq.m. (planning of 41 sq.m. appeared only since 1990), 2-room - 53 sq. M.; 3-room - 66-69 sq.m., 4-room - 77-83 sq.m., 5-bedrooms, which were built until the end of the 1980s, had total area 93 sq.m.

This series was used for the construction of Malossamek ("Superiments"), which was built until 1990. it nine-story housesconsisting, as a rule, from one go of two entrances. One-room apartments here are three varieties: 28/12/6; 31/15,5 / 6; 39/19/6 sq.m., and two-bedrooms were built only in one embodiment - 42/27/6 sq.m., separate rooms.

Buildings in this series, built until 2001,do not comply with the current requirements of SNiP inparts of the underestimated value of the calculated heat transfer resistance of the enclosing structures: exterior walls, windows, doors, attic overlap, floor of the 1st floor.

Since the 2000s, the variety of apartments of this series has increased. In some kitchen layouts, up to 16 sq. M., Big and wide balconies have appeared. Residential and total area also increased:

1-bedroom - up to 46 sq.m.;

2-bedrooms - up to 72 sq.m.;

3-room - up to 93 sq. M.;

4-room - up to 86 sq.m.

Most homes designed a large technical floor. Because of this, the elevator goes on the last floor.

In some buildings of the 97th series on the streets of the takeoff, Menzhinsky, Novosibirsk, 3-5 room apartments ranging from 103 to 145 sq.m.

Disadvantages of the series 111-97 :

Internal wall reinforced concrete panels 160 mm thickness do not give Ability to redevelop with increasing area of \u200b\u200brooms, kitchens Without punching and strengthening openings in the bearing wall panels.

Bad soundproofing walls, overlap. Reinforced concrete structures are well conducted sound.

The possibility of freezing the joints of interpanel seams due to a reduction in thickness Outdoor wall panels in the joints of the joints.

(10 votes)

Apartments 97 series are quite spacious, most often they have utility rooms - such as a dressing room or storage room. The height of the ceilings of the apartments of the 97 series from 2.5 to 3 meters. Since houses panel, respectively, the cost of the square meter of living space is not high. Without resorting to the grand redevelopment of the apartment of the 97 series, you can create a very beautiful and at the same time a cozy interior.

Design Studio "Insomnia" perfectly coped with this task, creating a stunning interior three room apartments 97 series of 60 sq.m. The project is completed for a young family with a 3-year-old daughter. The main wish of the owners is that the design is made in the shades of blue, gray, azure. Repairs must be fast, economical, with minimal redevelopment.

On the balcony of the 3-bedroom apartment of the 97 series there is a small area for recreation.

The design of the 97 series apartment includes both a beautiful and comfortable interior of a spacious bathroom.

The interior of the living room in the apartment of 97 series performs the function of the bedroom, so there are no glass doors and a lot of cabinets.

Children's - as if from the real fairy tale, Alice, who lost wonderland in the country, fully belongs to the child, on the one hand, this is a "table in the cana", on the other desktop and bedside tables. The sleep zone is filled with the curtains that the cabinets close the day, and at night or when it wants to hide - they move and form a house.

The kitchen provides another breakpoint (for guests) - a small sofa bed, the small desktop for a laptop is also equipped.

An example of a complete set of corner kitchen for 3-room apartment 97 series No. 1

Description: Kitchen headset 14 items, size 230-180cm (230-1.8 meters), size with a refrigerator 290cm-180 cm.

1. Wardrobe hinged showcase W-30 (717) -MDF
2.Shpaf mounted deaf shge-50 (360) -MDF
3.Shpat hinged showcase sh-30 (717) -MDF
4.Shchel with dishwasher mounted deaf C-60-2D (717) -MDF
5.Shpat mounted angular deaf shu-60 (717) -MDF
6.Shpat hinged Sh-60-2 Doors (717) -MDF
7.Shpaf hinged showcase sh-40 (717) -MDF
8.The reserves open PU-20 (717)
9.Tol-Tumba T-30-1y (MDF-K)
10.Tol-stand TK-60-2D + 1I + 1D (MDF-K)
11.Tubba under the angular mortise sink MU-90-DV40 (MDF)
12.Stol-Tumba T-40-1y (MDF-E)
13.stol for microwave TM-60SD (MDF-E)
14.Toltol-TuMBA TECTOR TD-20 (MDF)

Additional equipment and services:

1. Performing plinth - 4.2 meters (Plinth Metage Adjust directly in the basket)
2. Pins for plinth - 2 sets
3. Curl Planck on the table top -1 pcs.
4. Transfer washing
5. Aluminum strips - 2 pcs.
Metal washing in price is not included.

Total: price of this setting with facades MDF 1 price category 25 782 ruble. The price is calculated on January 15, 12. The price is shown without taking into account the value of the assembly. Assembly in the workshop 5% of the order value.

An example of a configuration of the corner kitchen for 3-room apartment 97 series No. 2

2
Description: Furniture set for kitchen 14 items. The kitchen equipment is similar to the configuration given in the first example. The difference lies only at the height of the cabinets and has been added eaves with a MDF bar.

The size: 230 cm-180cm. The size is shown without taking into account the refrigerator. The height of the lower modules is 85 cm. The height of the upper modules 36cm, 71.7 cm and 90.7 cm.

Price of the kitchen headset: If you liked the equipment, you can calculate the cost in the section Modular Kitchens.

An example of a complete set of corner kitchen for 3-room apartment 97 series No. 3

Description: Kitchen headset 12 items, size 230-180cm (230-1.8 meters), size with a refrigerator 290cm-180 cm.

An example of a complete set of corner kitchen for 3-room apartment 97 series No. 4

An example of a configuration of the corner kitchen for 3-room apartment 97 series No. 5

Architectural and construction solutions

10, 5-storey residential building, from products according to the 97 series, consisting of four block sections:in the I-II axes - a private block section (reused block sections of a residential building), a set of apartments typical floor 3-2-2-3, first floor 4-2-3;in the axes II-III - an ordinary shortened block section (a length of 21 m) with through passage and a rotary blocking element, a set of apartments of the standard floor apartment 2-1-1-2, the first floor 2-3-1;in the V-VI axes - a private short-circuit block section (21 m long) with two rotary blocking elements, a set of apartment facilities 2-1-1-2, first floor 3-3.On the first floor, on all block sections, apartments with individual summer yields to the main facade of the building are provided.The height of the typical and first floor in the residential part of the houses is 2.8 m.The necessary premises are provided: the switchboard on the first floor; ITP in the technical underground.The total number of apartments in a residential building is presented in Table. 5.1. (For more details, see the layout drawing).The construction volume is calculated to the upper mark of the heat insulating layer of the roof.Building area and building volume are calculated taking into account the blocking elements. Planched solutions of a residential building provide functionally reasonable relationships between individual rooms of each apartment.The designed residential building has a technical attic and underground, equipped with garbage wires with mechanisms of stripping and washing of trunks, passenger elevators g / n \u003d 1000 kg, with dimensions of 2200x1080x2100 mm. Elevator engine room in the level of the 10th floor.Outdoor decoration of a residential building - multicolor.The walls of the stairwells are painted with water-acrylic compositions at a height of 1.5 m.The interior decoration of apartments is provided in accordance with their functional purpose.Domestic doors - wooden according to GOST 6629-88.The floors in the residential premises of apartments, kitchens, corridors are covered with a linoleum on a heat-viciously insulating service (in the apartments on the first floors, wooden floors with the heater "Eau return"), in the bathrooms, bathrooms are concrete with colorful oil paint.Wall decoration residential premises, corridors, storerooms, kitchens are provided by pasting wallpaper of improved quality, in the bathrooms - the colorful oil paint at a height of 1.8 m, above - the color of the wa 2 times, the color is white.Ceilings - Improved coloring Ba, color - white.Walls of stair cells, tambours, elevator halls are painted on the entire height of water-dispersion paint, the floors of concrete mosaic.There is an opportunity to ventilate residential premises of apartments due to turning and folding beds of windows, as well as the vessels (for kitchens).The residential building is equipped with a garbage chute. The garbage trunks are installed above the garbage collectors located on the first floors. Surprise chambers are provided with a cold and hot water wash water supply, sewage with a ladder in the floor, heating, fire extinguishing system. The walls for the entire height are stalled by ceramic tiles, the ceiling is the whitewashes, a ceramic tile is provided on the floor in the garbagemer. Harvesting household waste - in a container for garbage collection and household sides km-0.6. The garbage chutes of the residential building is equipped with a mechanical device of cleaning, washing and disinfection of suburb.The loading valve of garbage disposal is attached to the garbage trunk with a clamp with the installation of rubber seals. The covers of the loading valves of garbage chutes have a dense floor, equipped with rubber gaskets. In places of passage of the garbage disposal through the slabs of the overlap, rubber seals are provided. The trunks of the garbage disposal - from the B-25 reinforced concrete, suitable for regular cleaning and disinfection. At the bottom of the garbage disposal is installed automatic fire-retention valve.

Constructive decisions

The residential building is designed to take into account the use of high factory readiness products. The structural scheme of the house is solved with bearing transverse and longitudinal walls, with a step of transverse walls 3.0 and 4.5 m, with supporting overlap on the walls along the contour.Modular mesh 1.5x1.5 m.The strength and stability of the structures is ensured by the operation of the block section of as a space-based unchangeable system formed by rigid vertical and horizontal diaphragms, located in three mutually perpendicular directions and connected among themselves in the places of their mutual intersection.For the relative mark of 0.000, the front surface area of \u200b\u200bthe elevator hall of the 1st floor is adopted. Floors in the first floor apartments on Options. +0.080.Tubes of elevator mines, ventbloki - from volumetric reinforced concrete blocks of factory manufacture. Lift shafts are made together with Chanisane Channels from Class B25 concrete (300 kg / cm3).Sanitary and technical cabins are prefabricated sheet materials (hereinafter referred to as the cabin). The cab is made in an embodiment without a ventilating unit in the left and right-hand performance. The carrier base of the cabin is a sanitary concrete pan. The carrier frame of the cabin is a rigid metal design from an angle that provides rigidity of the collection structure, while being a carrier element of sheet facing materials, which perceives the load during transportation and installation. For lifting the cabin there are mounting loops in the amount of 3 pieces. The increased factory readiness of the cab is ensured by the improved surface of the cab wall with the surface category not lower than A-2, mounted door blocks, the presence of mounted electrical wiring, the presence of sockets and switches, lamps. On the walls of the cabin there are holes for sanitary equipment and ventilation. The package includes 2 pcs. Ventilation plastic lattices installed during finishing works. A wooden mortgage detail is provided for fastening brackets of mounted shell. Wall panels of the cabin are performed from sheet materials on a metal frame of galvanized profiles of type "Knauf". GKLOs are used as facing sheet materials. As a middle layer, plates of polystyrene foam and mineral wool insulation are used. As a temporary packing of the cabin, a polyethylene film is used, a protective cabin from contamination and precipitation.Foundations - pile.The outer base panels are made from Ceramzitobetone B15.Internal base panels - 160 mm thick made of heavy concrete B15.The outer walls of the aboveground part of the building are three-layer ceramzite-concrete with discrete bonds carrying.Walls internal overhead part of the building - bearing, reinforced concrete panels, 160 mm thick, concrete class B15Overlapping - flat reinforced concrete panels with a thickness of 160 mm, concrete class B15.Balconies are reinforced concrete plates, concrete class B25.The fencing of balconies - consists of two parts: decorative - translucent fencing made of metal profiles with filling with glass and painted asbestos-cement sheets; Constructive - an internal fence, which is a railing on its own racks, made of steel rectangular pipe. Wind loads are perceived by decorative fence and are transmitted to aluminum racks and an internal fence. Operational loads are perceived by the internal fence made from a rectangular pipe with a cross section of 60x40x3 according to GOST 8645-68. Pipe material - Steel C245 according to GOST 27772-88. The immutability of the system is ensured by a rigid connection of the elements of the internal fence between themselves and with a balcony plate. The decorative part is mounted on its own brackets and is connected to the inner fence. To prevent electrochemical corrosion, the compound of steel and aluminum elements is performed by stainless steel with a polymer gasket. To compensate for temperature deformations, oval holes are provided for compensating for temperature deformations in the docking unit. Mounting the frame is made using anchor bolts and screws. The estimated height of the decorative fence racks is 2.85 m, the inner fence is 1.2 m. The step of decorative fences - 620-1060 mm, internal fence - 750-1500 mm.The roof is a non-a-terrible reinforced concrete concrete with an inner removal of a separate design with a passing underwear space. Pre-stressed ribbed roofing panels, trough-shaped water supply trays.The roof fence is metallic around the perimeter of the roof, 1200 mm height. The fence is performed on the racks made of metallic pipe Ø40х2,5 mm, the reinforcement Ø 18 AI in three rows. Step pitch - 1.5 m.Partitions internal - reinforced concrete panels with a thickness of 60 mm.Stairs are precast concrete marches and playgrounds.Elevator mines - self-supporting reinforced concrete tubggies.Trump over the entrance is a reinforced concrete plate.The entrance plate is a reinforced concrete flat plate with a mosaic coating.Outdoor doors according to GOST 24698-81. Domestic doors according to GOST 6629-88. Doors to the switchboard, control nodes, exit to the attic are made by fire-fighting 2 types certified.In the project for protection building structures From corrosion are provided in accordance with the requirements of SNiP 2.03.11-85 "Protection of building structures from corrosion".Concrete structures in contact with the soil are fused hot bitumen 2 times. All basebars are installed on a fresh solution cement solvent Makeup 1: 2 20 mm thick.To protect the bases of the walls from soaking around the walls, an asphalt concrete cessation is arranged with a thickness of 30 mm, 1.2 m wide, on a sandy gravel mixture, a thickness of 120 mm, on a compacted ground (E \u003d 28 MPa).The design of the residential building is made of material resistant materials ambient and corresponding II degree of fire resistance of the building. The mounting elements of the compounds of the outer walls between themselves, with the inner walls, the balcony plates with the floor panels and the floor panels between themselves are coated with a protector soil and close up with cement-sandy solution. All metal products are covered with PF-115 enamel 2 times on the soil of PF-20.

Planning to buy an apartment in Barnaul? Eye eyes from an excess of houses and layouts? In fact, the entire residential foundation of the regional capital can be divided into several categories: Stalinkins, which are not so many, classic Khrushchev, at home 97 series and modern objects. It is the penultimate that are among the most common and sold.

What is the difference between the 97 series?

Such objects began to erect from the mid-70s of the last century, and in some cities they continue to build to this day. As a rule, such objects have a height of 10-11 floors, flat layouts are distinguished by certain sizes, bathrooms - joint, are in close proximity to the kitchen, which has tiny sizes - from 9 to 13 squares depending on the number of rooms indoors. The entrance is distinguished by the lack of "pockets" and the presence of garbage disposal.

Planning apartments 97 series in Barnaul

The layout of 1 room apartment in the house of 97 series many may seem boring. Such premises have an area of \u200b\u200beither 34 square meters, or 43. The bathroom is separate that, by the way, is a fundamental difference from Khrushchev, and it is located at the entrance. In addition to the room and kitchen inside, the storage room can be located, which used to be used for its intended purpose, and now it becomes part of the residential space, turns into a garbobic, office, and a mining. Maybe there is a loggia inside. With it, the situation is similar - modern tenants are trying to use each meter of the apartment at the maximum, because the planning of apartments in typical houses Arrange not all.

In 2 and even 3 room apartment 121 and 97 series there is one important similarity: all rooms in them are isolated from each other, which lacks punches in which most premises are passing. It delivers many inconvenience to residents. 4 room apartment layout is built on the same principle. True, such apartments for Barnaul are rarity.

Generally at home 97 series experienced peculiar reforms several times. So, in the 90s began to erect one-bedroom apartment Square from 41 squares, after the 2000, the developer began to allow themselves some of the libations regarding the size of the apartments.

Odnushki began to have an area to 46 square meters inclusive.
Doubles - up to 72.
Treshki - up to 93
Fethips - up to 86, which, by the way, some tenants had no taste: the area of \u200b\u200bthe rooms was significantly less than in the treshka.

Also, builders have increased the kitchen to 16 squares, which is almost 2 times more originally planned in the 1970s. This advantage was able to evaluate the mistress: food cooking was much more.

True, even such objects are not devoid of minuses. The first and most important is not good noise insulation due to the use of special materials during construction. Another minus - constructive features Do not allow re-planning to increase the number of rooms. And finally, the third drawback is the cost. So, the price of 2 bedroom apartments can exceed a similar offer in Khrushchev at 20-30%. However, the solution of this issue is for buyers.

1 bedroom apartments:

2-bedroom apartments: