Apartments in the 97 series are quite spacious, most often they have utility rooms - for example, a dressing room or a storage room. Ceiling height of 97 series apartments is from 2.5 to 3 meters. Since the houses are panel, the cost price square meter living space is not high. Without resorting to a grandiose redevelopment of an apartment in the 97th series, you can create a very beautiful and at the same time cozy interior.
Design studio "Insomnia" perfectly coped with this task, creating a stunning interior three-room apartment 97 series 60 sq.m. The project was made for a young family with a 3-year-old daughter. The main wish of the owners is that the design be made in shades of blue, gray, azure. Repairs should be quick, economical, with minimal redevelopment.
A small seating area is located on the balcony of a three-room apartment of the 97th series.
The design of the 97 series apartment also includes a beautiful and comfortable interior of a spacious bathroom.
The interior of the living room in the apartment of the 97th series serves as a bedroom, so there are no glass doors and a lot of wardrobes.
.png)
The nursery - as if from a real fairy tale of Alice, lost in a wonderland, entirely belongs to the child, on the one hand, it is a "table in the cafe", on the other, a desk and bedside tables for trinkets. The sleeping area is fenced off with the help of curtains that close the wardrobes during the day, and at night or when you want to hide, they move in and form a house.
The kitchen provides one more sleeping place (for guests) - a small sofa bed, as well as a small work desk for a laptop.
History
The large-panel 97 series of houses was developed in the city of Novosibirsk by the SibZNIIEP Institute in 1971. At one time, it was recognized as one of the best in the country in terms of planning parameters and efficiency.Buildings of the 97th series, unlike the previous standard ones, provided significant opportunities for urban planning maneuverability in the formation of microdistricts, made it possible to increase the number of storeys in buildings.
The first residential buildings of the 97th series in Krasnoyarsk were commissioned in 1974 on the streets of Shevchenko, Krasnodar, Khabarovsk, Republic and Metallurgov Avenue.
After a while, the people called the new standard of layouts the "new" layout.
Mass construction of this series in Krasnoyarsk began in the early 1980s with the construction of new residential areas"Severny", "Solnechny", the area of Kopylova street and some others. Houses were built in almost all parts of the city.
In the 2000s, the series underwent significant modernization.Exterior wall panels, floor slabs, roof panels, attic height and other elements have been significantly redesigned. As a result, gray buildings received new, individual facades, a large number planning solutions and increased number of storeys.
Currently, houses based on this series are being built in large numbers. Buildingbecame more varied and effective on the outside, more comfortable on the inside. A wide variety of layouts of 1-3 room apartments have appeared. But, unfortunately, some developers refused to build 4-room apartments, and now, when many families have 2 or more children, there is an obvious shortage of such apartments on the Krasnoyarsk real estate market.
Characteristics of the 111-97 series
Residential buildings built on the 97th series from the mid-1970s to the late 1990s have a small and limited number of layouts. So, 1- room apartments here - 36-41 sq.m. (layout with an area of 41 sq.m. appeared only in 1990), 2-room apartments - 53 sq.m .; 3-room - 66-69 sqm, 4-room - 77-83 sqm, 5-room, which were built until the end of the 1980s, had total area 93 sq.m.
This series was also used for the construction of "small families" ("improved"), which were built until 1990. it nine-storey houses, consisting, as a rule, of one or two entrances. One-room apartments there are three varieties: 28/12/6; 31 / 15.5 / 6; 39/19/6 sq.m., and two-room apartments were built in only one version - 42/27/6 sq.m., separate rooms.
Buildings in this series, built before 2001,do not meet the current requirements of SNiP inpart of the underestimated value of the design heat transfer resistance of the enclosing structures: external walls, windows, doors, attic floors, the floor of the 1st floor.
Since the 2000s, the variety of apartments in this series has increased. In some layouts, the kitchens have increased to 16 sq.m., large and wide balconies have appeared. The living and total area has also increased:
1-room apartments - up to 46 sq.m .;
2-room apartments - up to 72 sq.m .;
3-room apartments - up to 93 sq.m .;
4-room apartments - up to 86 sq.m.
Most houses have a large technical floor. Because of this, the elevator goes to the top floor.
In some buildings of the 97th series on Vzletnaya, Menzhinsky, Novosibirskaya streets, 3-5 room apartments with an area of 103 to 145 sq.m. are designed.
Disadvantages of the series 111-97 :
Internal wall reinforced concrete panels with a thickness of 160 mm do not give the ability to carry out redevelopment with an increase in the area of rooms, kitchens without punching and reinforcing openings in load-bearing wall panels.
Poor sound insulation of walls, ceilings. Reinforced concrete structures conduct sound well.
Possibility of freezing of joints of interpanel seams due to a decrease in thicknessexternal wall panels at the joints.
An example of completing a corner kitchen for a 3-room apartment 97 series No. 1
1
Description: kitchen set 14 items, size 230-180cm (230-1.8 meters), size with refrigerator 290cm-180cm.
1. Cabinet hinged showcase Ш-30 (717) -MDF
2.ShG-50 (360) -MDF hinged deaf cabinet
3. Cabinet hinged showcase Ш-30 (717) -MDF
4.Cabinet with a deaf hinged dish dryer S-60-2D (717) -MDF
5.Cabinet hinged angular deaf ШУ-60 (717) -MDF
6.Sh-60-2 hinged cabinet doors (717) -MDF
7.Sh-40 (717) -MDf hinged cabinet
8.Open side shelf PU-20 (717)
9.Table-pedestal T-30-1Ya (MDF-k)
10.Table-pedestal TK-60-2Ya + 1Ya + 1D (MDF-k)
11.Cabinet for corner inset sink MU-90-dv40 (MDF)
12.Table-pedestal T-40-1Ya (MDF-E)
13.Table for microwave TM-60-2D (MDF-e)
14.Table-pedestal end TUD-20 (MDF)
Additional equipment and services:
1. Wall skirting board - 4.2 meters (adjust the footage of the skirting board directly in the basket)
2.Skirting board caps - 2 sets
3. Corner strip on the table top - 1 pc.
4.Sink inset
5. Aluminum strips - 2 pcs.
The metal sink is not included in the price.
Total: the price of this complete set with MDF facades of the 1st price category 25 782 ruble. The price is calculated on 15.01.12. The price is indicated without the cost of assembly. Assembly in the shop 5% of the order value.
An example of completing a corner kitchen for a 3-room apartment 97 series No. 2
2
Description: a set of furniture for the kitchen 14 items. The complete set of the kitchen is similar to the set shown in the first example. The difference lies only in the height of the cabinets and a cornice with an MDF strip has been added.
The size: 230 cm-180 cm. The size is indicated excluding the refrigerator. The height of the lower modules is 85 cm. The heights of the upper modules are 36 cm, 71.7 cm and 90.7 cm.
Kitchen set price: if you liked the package, you can calculate the cost in the modular kitchens section.
An example of completing a corner kitchen for a 3-room apartment 97 series No. 3
3
Description: kitchen set 12 items, size 230-180cm (230-1.8 meters), size with refrigerator 290cm-180cm.
An example of completing a corner kitchen for a 3-room apartment 97 series No. 4
4
An example of completing a corner kitchen for a 3-room apartment 97 series No. 5
5
Architectural and construction solutions
10, 5-storey residential building, from the series 97, consisting of four block sections:in axes I-II - an ordinary block-section (reusable block-sections of a residential building), a set of apartments typical floor 3-2-2-3, ground floor 4-2-3;in axes II-III - an ordinary shortened block-section (21 m long) with a through passage and a rotary blocking element, a set of apartments on a typical floor 2-1-1-2, on the first floor 2-3-1;in axes V-VI - an ordinary shortened block section (21 m long) with two rotary locking elements, a set of apartments on a typical floor 2-1-1-2, on the first floor 3-3.On the first floor, in all block sections, there are apartments with individual summer exits to the main facade of the building.The height of the standard and first floor in the residential part of the houses is 2.8 m.The necessary premises are provided: switchboards on the ground floor; ITP in the technical underground.The total number of apartments in a residential building is presented in table. 5.1. (see the layout drawing for more details).The building volume is calculated up to the upper mark of the roof insulation layer.The building area and construction volume are calculated taking into account the blocking elements. NSthe planning solutions of the residential building provide functionally substantiated interconnections between the individual rooms of each apartment.The projected residential building has a technical attic and an underground, equipped with garbage wires with mechanisms for cleaning and washing the trunks, passenger elevators with a lifting capacity of 1000 kg, with dimensions of 2200x1080x2100 mm. Elevator engine room at 10th floor level.The exterior decoration of the residential building is multicolored.The walls of the stairwells are painted with water-acrylic compounds to a height of 1.5 m.The interior decoration of the apartments is provided in accordance with their functional purpose.Internal doors - wooden in accordance with GOST 6629-88.The floors in the living quarters of apartments, kitchens, corridors are covered with linoleum on a heat and sound insulating base (in apartments on the first floors the floors are wooden with insulation "Isover"), in bathrooms and bathrooms concrete floors are painted with oil paint.Wall decoration living quarters, corridors, storerooms, kitchens is provided with improved quality wallpaper, in bathrooms - painting with oil paint to a height of 1.8 m, higher - painting BA for 2 times, white.Ceilings - improved painting BA, color - white.The walls of staircases, vestibules, elevator halls are painted to the full height with water-dispersion paint, the floors are concrete mosaic.It is possible to ventilate the living quarters of the apartments due to the swing-out windows, as well as vents (for kitchens).The residential building is equipped with a garbage chute. The chute shafts are installed above the garbage chambers located on the ground floors. Garbage chambers are provided with cold and hot water supply for cleaning the premises, sewerage with a floor drain, heating, and a fire extinguishing system. The walls are tiled to the full height with ceramic tiles, the ceiling is whitewashed by VA, and ceramic tiles are provided on the floor in the trash chamber. Collection of household waste - into a container for collecting garbage and household waste KM-0.6. The garbage chute of a residential building is equipped with a mechanical device for cleaning, washing and disinfecting SUBO.The loading valves of the garbage chutes are attached to the trunk of the garbage chute with a clamp with the installation of rubber seals. The covers of the loading valves of the garbage chutes have a tight rebate and are equipped with rubber gaskets. In places where the garbage chute passes through the floor slabs, rubber seals are provided. Garbage chute trunks are made of B-25 reinforced concrete, suitable for regular cleaning and disinfection. An automatic fire-retardant valve is installed at the bottom of the garbage chute.
Constructive decisions
The dwelling house is designed taking into account the use of products of high factory readiness. The structural scheme of the house is solved with load-bearing transverse and longitudinal walls, with a step of transverse walls of 3.0 and 4.5 m, with the support of the ceiling on the walls along the contour.Modular grid 1.5x1.5 m.The strength and stability of the structures is ensured by the operation of the block-section box as a spatial unchangeable system formed by rigid vertical and horizontal diaphragms located in three mutually perpendicular directions and interconnected at their mutual intersection.The front surface of the elevator hall of the 1st floor is taken as a relative elevation of 0.000. Floors in ground floor apartments at elev. +0.080.Tubings of elevator shafts, ventilation blocks are made of prefabricated volumetric reinforced concrete blocks. The elevator shafts are made of concrete of class B25 (300 kg / cm3) together with the channels of the refuse chutes.Sanitary cabins - prefabricated from sheet materials (hereinafter the cab). The cab is made in a version without a ventilation unit in the left and right versions. The supporting base of the cabin is a sanitary reinforced concrete pallet. The load-bearing frame of the cab is a rigid metal structure made of a corner, which ensures the rigidity of the prefabricated structure, at the same time being a load-bearing element of sheet cladding materials, which takes up loads during transportation and installation. For lifting the cab, there are mounting loops in the amount of 3 pieces. Increased factory readiness of the cab is provided by an improved surface of the cab walls with a surface category of at least A-2, mounted door blocks, the presence of built-in electrical wiring, the presence of sockets and switches, lamps. Holes for sanitary fittings and ventilation are provided in the walls of the cabin. The delivery set includes 2 pcs. plastic ventilation grilles installed during finishing works. A wooden insert is provided for attaching the brackets of the hinged sink. The wall panels of the cab are made of sheet materials on the metal frame of galvanized profiles of the "Knauf" type. GKLOV is used as facing sheet materials. Foamed polystyrene plates and mineral wool insulation are used as the middle layer. A polyethylene film is used as temporary packing of the cabin, which protects the cabin from pollution and precipitation.The foundations are piled.External basement panels are made of B15 expanded clay concrete.Internal plinth panels - 160 mm thick, made of B15 heavy concrete.The outer walls of the above-ground part of the building are three-layer expanded clay concrete with discrete ties, load-bearing.Internal walls of the above-ground part of the building - load-bearing, reinforced concrete panels, 160 mm thick, concrete class B15Ceilings - flat reinforced concrete panels with a thickness of 160 mm, concrete class B15.Balconies - reinforced concrete flat slabs, concrete class B25.Balcony fencing - consists of two parts: decorative - translucent fencing made of metal profiles filled with glass and painted asbestos-cement sheets; constructive - an internal fence, which is a railing on its own racks, made of a steel rectangular pipe. Wind loads are absorbed by the decorative fence and transferred to the aluminum posts and the internal fence. Operational loads are perceived by an internal fence made of a rectangular pipe with a cross section of 60x40x3 in accordance with GOST 8645-68. Pipe material - Steel S245 in accordance with GOST 27772-88. The immutability of the system is ensured by the rigid connection of the elements of the internal fencing to each other and to the balcony slab. The decorative part is mounted on its own brackets and connected to the internal railing. To prevent electrochemical corrosion, the joints of steel and aluminum elements are made with stainless steel self-tapping screws through a polymer gasket. To compensate for thermal deformations, oval holes are provided in the junction of the posts of the decorative fence. The frame is installed using anchor bolts and self-tapping screws. The design height of the decorative fence posts is 2.85 m, the internal fence - 1.2 m. The spacing of the decorative fence posts is 620-1060 mm, the internal fence is 750-1500 mm.The roof is a prefabricated non-roll reinforced concrete with an internal drainage of a separate structure with a passage under-roof space. Prestressed ribbed roof panels, trough-shaped spillways.Roof fencing - metal along the perimeter of the roof, 1200 mm high. The fence is made of metal pipe ø40x2.5 mm, with reinforcement ø 18 AI in three rows. The step of the racks is 1.5 m.Internal partitions - reinforced concrete panels 60 mm thick.Stairs - prefabricated reinforced concrete flights and platforms.Elevator shafts are self-supporting reinforced concrete tubing.The canopy over the entrance is a reinforced concrete slab.The entrance slab is a flat reinforced concrete slab with a mosaic covering.External doors in accordance with GOST 24698-81. Internal doors in accordance with GOST 6629-88. Doors to the electrical control room, control units, exit to the attic are manufactured by type 2 fire-fighting, certified.The draft measures to protect building structures from corrosion are provided in accordance with the requirements of SNiP 2.03.11-85 "Protection of building structures from corrosion".Concrete structures in contact with the ground are coated with hot bitumen 2 times. All basement panels are installed on the mortar on freshly laid cement mortar composition 1: 2 20 mm thick.To protect the bases of the walls from soaking, an asphalt-concrete blind area 30 mm thick, 1.2 m wide is arranged around the walls, along a sand-gravel mixture, 120 mm thick, on compacted soil (E = 28 MPa).Residential building structures are made of materials resistant to impact the environment and corresponding to the II degree of fire resistance of the building. Mounting elements for connecting external walls with each other, with internal walls, balcony slabs with floor panels and floor panels between each other are covered with tread soil and sealed with cement-sand mortar. All metal products are covered with PF-115 enamel 2 times on PF-20 soil.
