Profiled membrane planter standard. Instruction. installation of the PLANTER protective and drainage membrane. Reliable protection for your home. Laying to protect waterproofing

• PLANTER Standard (Planter Standard)

  A business class product, ideally matched to the physical and mechanical characteristics of which allow achieving the best balance of strength and flexibility of the material. profiled membrane PLANTER is a High Density Polyethylene (HPDE) sheet with 8 mm high molded rounded protrusions. The surface of the material effectively distributes the pressure of the soil over the entire area of ​​​​the base or foundation of buildings and structures. This excludes the formation of local (point) loads.

  Applies

  Buy
  

• 

  PLANTER Extra (Planter Extra)

  profiled membrane differs in the increased mechanical durability and is applied in the conditions of the raised operational loadings. profiled membrane PLANTER made of high density polyethylene with molded spikes 8 mm high. PLANTER has high strength characteristics, as well as resistant to chemical aggression, to the effects of mold, bacteria and plant roots.

  Applies to protect the waterproofing from mechanical damage, protect the foundation slab from capillary moisture, sanitize damp walls, prepare the base for the foundation slab and waterproof the blind area.

  Buy
  

• 

  PLANTER Eco (Planter Eco)

  The membrane is perfect for use at private low-rise construction sites due to its low weight and ease of installation, where, as a rule, low operational loads act on the material. The surface of the material effectively distributes the pressure of the soil over the entire area of ​​​​the base or foundation of buildings and structures. This excludes the formation of local (point) loads. The main function of membranes PLANTER eco- protection of the waterproofing layer of foundations and foundation slab.

  Applies to protect the waterproofing of mechanical damage, protect the foundation slab from capillary moisture, sanitize damp walls, prepare the base for the foundation slab and waterproof the blind area.

  Buy
  

• 

  PLANTER Geo (Planter Geo)

  profiled membranePLANTER geois a high-density polyethylene (HDPE) sheet with a spike height of 8 mm, with a layer of thermally bonded geotextile glued to it. Effectively protects the foundation walls from moisture and basements from dampness, and also serves for the primary collection and removal of water from the roof surface. Thanks to the protrusions on the surface of the membrane, channels are formed for the rapid removal of water. The membrane consists of two layers: geotextile collects water, and drainage channels direct it.

  Applies for the organization of horizontal and vertical drainage in the construction of foundations and as a drainage, protective, separating and anti-root layer in flat roof structures.

  Buy
  

• 

  PLANTER Extra Geo (Planter Extra Geo)

  profiled membranePLANTER extra geois a high-density polyethylene (HDPE) sheet with a spike height of 8 mm with a layer of thermally bonded geotextile glued to it. Effectively protects the foundation walls from moisture and basements from dampness, and also serves for the primary collection and removal of water from the roof surface. Thanks to the protrusions on the surface of the membrane, channels are formed for the rapid removal of water. The membrane consists of two layers: geotextile collects water, and drainage channels direct it.

  Applies for facilities with increased requirements for reliability and safety, including:
  - Constructions with laying depth from 2 to 10 meters. For example, multi-level parking lots or military and strategically important government facilities;
  - Tunnels of open type;
  - Premium-class buildings with exploitable or "green" roofs, as well as roofs of underground parking lots (stylobates);
  - Structures of all types with a reservoir drainage system, incl. residential and office centers, airfields, solid waste landfills, stadiums and others.

  Buy
  

Plfnter are one- and two-layer universal polymeric membranes used in industrial, civil, transport and hydraulic engineering construction. The membranes are manufactured by forming a single web of high-density polyethylene (HDPE) raw material into a single web. The entire area of ​​the front surface of the membranes is made in the form of cone-shaped protrusions 8 mm high and attached to them (for certain grades) geotextile material.

Profiled membranes Planter and accessories

Profiled Planter/Planter membranes manufactured by TechnoNIKOL help to keep expensive waterproofing of the foundation without damage for more than 50 years. There are several types of membranes in the Planter family of profiled membranes:

• Planter Standard 2x20 m
• Planter Geo 2x15 m (with a drainage layer of gketextile)
• Planter Eco 2x20 m (with lower specific gravity)
• Planter Extra 2x20 m
• Planter Extra Geo 2x15 m

Installation of membranes does not require professional skills and they are cheaper than their imported counterparts.

Application of Planter membranes

Profiled membranesare used in industrial construction and private housing construction for waterproofing foundations and saves time during its installation at facilities, due to its simplicity and convenient roll sizes. Also, membranes can save up to 30% of money when replacing concrete preparation. The membranes serve for more than 50 years, which makes it possible to do without expensive repairs of insulated surfaces for a long time.

Planter membranes are also used in the construction of tunnels, overpasses, underground parking lots and parking lots, i.e. where reliable and long-term waterproofing of the underground parts of the structure is required.

In private housing construction for:

• drainage system devices;
• replacement of concrete preparation;
• repair of internal walls;
• drainage devices under paving slabs;

In industrial construction for:

• drainage system devices;
• replacement of concrete preparation;
• foundation waterproofing protection;
• devices for horizontal reservoir drainage in exploited roofs;
• "wall in the ground" systems.

Technical characteristics of Planter membranes

Laying technology for profiled membranes Planter

Planter membranes protect both vertical and horizontal surfaces. When mounted on vertical surfaces, the membrane is positioned with protrusions inward, i.e. against the wall. Thanks to them, air circulation near the wall is ensured, and it always remains dry. If the installation is carried out inside the building, then any sheet finishing materials (gypsum board or plaster mesh) can be mounted on top of the membrane. Installation is carried out mechanically - with dowels for concrete around the entire perimeter of the insulated surface or with the help of special clamping metal strips.

All products of this series can be used in various regions of our country. The membranes withstand low temperatures, exposure to UV radiation, humid and aggressive environments for a long time. From a wide variety of membranes, you can choose the one that is best suited for solving a particular problem.

Related materials

In our warehouses you can buy building materials for the entire cycle of construction and finishing of your facility from the foundation to the roof. Together with membranes, we offer a complete list of materials for waterproofing and insulation of building foundations. Having once done the correct waterproofing and drainage from the base of the house, you will live in a dry and comfortable home for many years.

BUY IN ONE PLACE, SAVE ON DELIVERY, USE DISCOUNTS FOR LOYAL CUSTOMERS

If the waterproofing of the foundation is violated, its service life is reduced, and the building becomes unusable. One of the innovations was the use of a profiled membrane.

The main functions and advantages of a profiled membrane

The membranes are made of polyethylene, which is coated with a thermoplastic material. Therefore, such materials have a wide range of uses, as well as increased strength. The profiled type membrane consists of high-density polyethylene, on top of which there are empty convex elements. Thanks to such protrusions, the pressure is distributed over the entire area of ​​​​the material, this helps to prevent deformation.
Profiled type membranes are distinguished by high strength, durability, ease of installation, ease of processing, affordable cost, and it is also resistant to various temperature changes.

Where is a profiled membrane used?

The profiled type membrane can be used in various directions.

1. A drainage system is made of the material near the foundation walls, this ensures the exit of water into the drainage drain.
2. The membrane performs waterproofing protection of the foundation from groundwater and precipitation.
3. The material is used as drainage, which is located horizontally.
4. Also, with the help of such material, you can create ventilation of the walls, for this it is attached to the wall from the inside.

The profiled type membrane is used in the construction of road surfaces, underpasses, garages, basements, foundations, cellars.

What is a profiled planter standard membrane?

The planter standard profiled membrane consists of high-density polyethylene, it has protruding elements of a rounded appearance, eight millimeters high. The surface of such a material allows you to distribute the soil pressure around the entire perimeter of the foundation, that is, point loads do not appear, and deformation is excluded.
Thanks to special protrusions, air enters the space near the walls, that is, high-quality ventilation occurs, the temperature and humidity indicators in the room improve.
The planter standard waterproofing material has increased mechanical resistance, prevents the development of fungal elements, does not respond to temperature changes, and ultraviolet rays. The material can be laid horizontally or vertically, and the edges of the sheets can be welded if necessary.

What are the functions of a profiled membrane?

The profiled membrane serves as a waterproofing material and protects the foundation from soil settlement, the germination of the roots of various plants, water from rain and snow. The material can replace preparatory work for concrete, protects the base slab from groundwater.
When sheltering the walls from the outside, the temperature and humidity indicators improve. And basements become protected from soil moisture.
When sheltering the walls from the inside, the temperature and humidity index is observed in the room. In the basement, moisture descends into the drainage system.

Laying technology of the profiled planter standard membrane

Laying the membrane with damp walls

A profiled type membrane allows you to dry a too damp wall surface, no matter how it is laid, inside or outside. Laying is carried out around the entire perimeter of the surfaces of the floor and walls, fastening is carried out with the help of dowels through the elements of a metal look. In the lower section, a mesh for plaster is attached to the membrane, it can be of a metal or polymer type, it depends on the further material.

Laying to protect waterproofing

No matter what type of waterproofing material is used, it needs reliable protection. The profiled type membrane helps protect the waterproofing from construction debris and sprouted roots, while the base material does not undergo deformation.
Laying the planter standard membrane is not difficult, it is overlapped, fixed above the waterproofing layer with a metal-like bar or with dowels.

The use of the membrane as a replacement for foundation preparation

If the groundwater level is low, then compacted soil, carefully leveled, serves as the base. The groundwater level can be raised by pouring fine gravel, 10 centimeters thick, onto the ground.
The profiled membrane is laid with convex elements down. The rolls are rolled out with an overlap of about 10 centimeters. All connections can be additionally glued with a special bitumen-rubber type tape, this will help prevent leakage of milk from concrete, and protect the structure from groundwater.
In case of mechanical damage to the membrane material, that is, ruptures, it can be glued with tapes. When laying the membrane on an area of ​​considerable size, the cross-section joints are displaced by 50 centimeters. All connections are closed with self-adhesive tape, they can also be welded or dry-jointed.

The difference between the planter standard membrane and other materials

The material has a wide range of uses, as it is strong, durable, and performs its functions to the fullest. Due to the arrangement of convex elements, the membrane has mechanical rigidity, and has the ability to withstand loads up to 25 tons. That is, the membrane of the profiled planter standard type is resistant to loads of various types, and does not lend itself to deformation.
The basis of such material is polyethylene, which has a high density and water resistance. Thus, the membrane provides reliable protection of the surface from moisture ingress. Water is drained through special recesses, which are located between the convex elements. Polyethylene material is resistant to chemical elements, fungus, and other microbes. The membrane withstands aggressive substances that dissolve in the soil, and does not deform when temperature changes.
The planter standard profiled type membrane is used to make the drainage system of the walls, and also effectively protects the waterproofing material. Such material has a small weight, which does not exert a significant load on the structure. Also, thanks to this, unloading and transporting the material is not laborious.
The material is easy to install, it is laid out in a horizontal and vertical overlap position, and the joints are closed with a special tape. When using a membrane, the level of humidity and temperature is stabilized by removing moisture from the surfaces.

Features of laying the planter standard membrane

Laying the membrane is easy, thanks to its light weight, and the roll type of packaging, the material quickly spreads, for this there is no need to use special equipment or hired workers.
The technology of laying the membrane of the profiled type planter standard is carried out by rolling out the roll, and then fixing it with dowels or a metal rail.
First you need to determine which side to properly stack the material. The surface with convex elements should be directed towards the waterproofing material or the foundation. Due to the unevenness between the surface and the membrane, air passes freely, this contributes to high-quality ventilation and the removal of excess moisture.
Also, in order to qualitatively protect the base of the building from excessive moisture, the material is overlapped, leaving a small gap, and the ends are fixed with bituminous mastic. The membrane is fixed with dowels, which have a large metal washer.
With increased humidity of the surface of the walls, they are sanitized, while the profiled membrane is laid vertically. Before performing additional surface finishing, a special mesh for plaster is fixed. When laying a profiled-type membrane indoors, they also use a grid for plastering or perform plasterboard sheathing on metal elements. At the same time, the indicators of humidity and temperature in the room stabilize. The profiled membrane provides high-quality ventilation to the surface, and in the basement, moisture flows along the grooves into the drainage system without lingering on the walls.

Main conclusions

The planter standard profiled type membrane is an effective protection for the foundation against groundwater ingress, and prevents the destruction of the waterproofing layer.
The membrane has an affordable cost, thanks to this, it is used in preparation for concrete during the construction of the foundation. This allows you to quickly build a structure, and save on costs. The canvas can be laid on various surfaces, the work is not laborious, since the material has a convenient roll-type packaging, and is light in weight.
Due to the high technical performance, and convex elements located on the surface of the canvas, the material is able to distribute the load evenly over the entire surface. Due to this, there is no deformation and rupture of the membrane, and the load of a point type is also excluded. The planter standard profiled membrane is durable and can last more than 50 years.

TechnoNIKOL offers comprehensive solutions for moisture protection of residential buildings and commercial facilities. Waterproofing systems have been developed using several types of materials. The product line contains everything you need: from primers, insulation boards to protective membranes. Planter is a new development of the manufacturer: a versatile material with a wide range of applications. Planter protective sheet is used as the top layer of a waterproofing system, primary drainage material, replaces the concrete layer in preparation for pouring the foundation, for laying paving slabs.

The Planter membrane is a rolled synthetic protective material. Hollow spikes are pressed out in a checkerboard pattern on the polymer canvas.

Automation and control: production facilities

The material of manufacture is high density polyethylene. PVP is produced using extrusion technology. The production process is automated, compliance with the technology is strictly controlled at each stage. A special formula of raw materials has been developed for the manufacture of highly durable polyethylene. Cloths are integrally pressed, without seams.

Membrane Planter: a versatile product

Polyethylene for the manufacture of planter is a high-strength fabric with a homogeneous dense internal structure, which has increased elasticity and resistance to any type of damage.

Advantages:

• Wide operating temperature range. The material retains performance without loss of elasticity even at an air temperature of -45 o.

• Durability. The manufacturer guarantees from 60 years of membrane operation, subject to installation recommendations.

• Elasticity. The material withstands increased loads without the risk of ruptures.

• Resistance to aggressive substances. Polyethylene sheets are not destroyed by chemicals and can be installed in aggressive soils.

• Environmental friendliness. Protective membrane Planter - not only for outdoor use. The material can be mounted on the surface of walls and floors inside buildings, in residential premises.

• Ease of installation. Universal material is mounted in two directions: horizontal and vertical. The edges of the sheets can be connected with a special fixing tape, without the use of hot welding technology.

Main functions of protective profile membranes

TechnoNIKOL produces profiled Planter membranes for use in private and industrial construction. Main functions:

• Protection of external insulation systems from mechanical damage is necessary both at the stage of backfilling of pits and during operation.

• Primary water drainage during the arrangement of wall drainage. Water drainage is provided by the cavities of the studded canvas. The minimum moisture removal is up to 5 liters per square meter.
• Preparation device for a monolithic or slab foundation. The Planter Standard membrane replaces the concrete layer, which is poured according to traditional technology before the installation of the slabs.
• As a draining base for the arrangement of yards and paths, a blind area.

Water drainage and wall protection from capillary moisture

• Sanitation of wet surfaces. Installation of canvases on damp walls is allowed: ventilation and free air circulation are provided by channels on the surface of the membrane.
• Protection and removal of moisture from flat and exploited, green roofs. It is used in combination with multilayer insulation. Protects the surface from the germination of plant roots, deformation of the insulating layers.
• Soundproofing. Mounted for sound insulation of residential premises: under the floor covering.

Membrane protective products TechnoNIKOL for private and commercial construction

In the line of profiled membranes Planter - 2 types of product:

1. Single layer canvas, labeled Standard, Eco or Extra.
2. Two-layer material with a geotextile fabric applied over a polyethylene base, marked Geo and Geo Extra.

TechnoNIKOL offers Planter Standard to protect the structures of low-rise private houses. For work at large industrial facilities, in complex soils, at a considerable depth, materials of the Extra level are intended.

Planter Standart: characteristics and application

Planter Standard is a universal membrane designed for use in the construction of private and commercial facilities. The web thickness is 0.55 mm. The length of the membrane in a roll is 20 m.

Application:

1. In the outer layer of the outer foundation insulation. The material protects the surface from local point damage by stones, evenly distributes the load from soil pressure, prevents the penetration of ground moisture, and removes water from the wall.

1. For the arrangement of the preparatory layer for the foundation. In dense soils, the membrane can be installed instead of a concrete pad. At the same time, the issue of reservoir drainage is being addressed. Installation of canvases reduces the total cost of work and saves time: it takes up to 2 weeks to pour and set concrete preparation, and several hours to install polyethylene.

1. For laying under the blind area.

1. As insulation for wet basement walls, indoors and outdoors.

Eco membrane: the best choice for private homes

Among the profiled products of TechnoNIKOL is the Planter Eco membrane. The canvas is not inferior in functionality to a product of the Standard level. Physical characteristics, the internal structure of the material is optimized for use in private construction. The strength and elasticity of the membrane is sufficient for the arrangement of protective systems in low-rise buildings, inside and outside basements located at shallow depths.

Eco: The Budget Alternative

Also, the Eco Planter profile membrane can be used as a replacement for a concrete pad under the foundation in stable dry soils, with a deepening of up to 1.5 - 3 m, for arranging the base for tiles in private courtyards. The thickness of the material is standard, it is 0.55 m. In a roll there is a single sheet 20 m long.

Extra products: protection in difficult conditions under increased loads

Extra: material for complex objects

For use in industrial construction, a membrane of increased strength has been developed - Planter Extra. Cloths are used:

• When arranging the roofs of stylobates, multi-storey buildings - regardless of the complexity of the design.

• For the protection of waterproofing materials in industrial facilities under construction.

• When preparing pits for monolithic foundations, during the construction of bridges, roads, tunnels.

• As a soundproofing and additional thermal and moisture protective layer in underground structures - parking lots, basements of residential buildings.

• When building objects in complex, heaving soils.

The strength and elasticity of the material marked Extra exceeds the performance of standard cloths by almost 2 times. The weight is 0.8 kg per meter.

Protective membrane Geo: primary drainage and moisture protection of walls

The Planter Geo membrane is a two-layer material. A permeable material - geotextile - is attached to the base made of profiled polyethylene. The membrane performs the following functions:

• Drainage.

• Protective.

The canvas, which is attached to the spikes, allows moisture to pass through, but retains soil particles and debris. The channels, which are formed by protrusions on the surface of the polyethylene, divert water to the drainage pipe. Multilayer canvases are fixed on horizontal and vertical surfaces. The material is used in the organization of near-wall drainage lines, reservoir drainage layer, surface drainage systems at sites where tile laying is planned.

Planter Extra Geo: a product for industrial facilities and roofs

Blade for use in difficult conditions: Extra Geo

Reinforced profiled membrane Planter Geo Extra is a professional material for application:

• In drainage and insulation systems of underground facilities, with a deepening of up to 10 m.

• To protect structures of open tunnels.

• In the arrangement of green roofs, roofs of business facilities.

• In the construction of open drained areas of a large area, stadiums, roads.

Extra class material differs from Standard products in increased weight, denser internal structure and improved strength and resistance to stress.

Characteristics

Auxiliary and connecting materials

In addition to membrane roll materials, the manufacturer's line includes all the necessary related materials for fixing the web to different types of surfaces and connecting strips in the vertical and horizontal plane.

Polyethylene profile Planter Profile is made of high density polymer. Products are designed for pressing the canvas on waterproofing sheathing. The profile is installed over the profile membrane, above the waterproofing materials. Also, the polymer strip performs a protective function: the profile prevents moisture from entering the insulating layers.
As a fastener for a rolled profile sheet, use:

• Dowels with washers. The dowels are made of high-strength steel, the washers are made of dense polyethylene. Are applied to fixing of cloths on all types of vertical surfaces. To reduce the load on 1 fastening unit, a special shape of the pressure washer has been developed, thanks to which the weight of the sheet is distributed evenly over a larger area.

• Fasteners on a flat adhesive base. To fix expanded polystyrene sheets and membranes on a bitumen base, plastic fasteners No. 01 TechnoNIKOL are used. The adhesive base is firmly fixed on the base, and the polyethylene dowel securely holds the canvas without the formation of "cold bridges".

Plastic dowel with self-adhesive base

To connect the strips of membranes to each other, use:

• Planterband is an adhesive tape designed for joining joints, sealing seams. Polymer-bitumen tape is suitable for working with all types of rolled profiled materials.

• Nicoband is a roll material for joining sheets with overlapped edges. The base is aluminum, the adhesive composition is bituminous. The adhesive layer is protected by a transparent film.

Aluminum Based Sealant

Technology of laying protective membranes in TechnoNIKOL insulation systems

The laying technology of profiled Planter membranes is quite simple. To fix the sheets, when using the connecting materials recommended by the manufacturer, the use of hot gluing methods and special tools is not required.

Attaching material to vertical surfaces

Installation of membrane protection is carried out both outside buildings and on the internal walls of wet rooms. For laying in private houses, a product of the Standard, Eco level is chosen. When it is necessary to connect the membrane to the wall drainage line, it is rational to use material with geotextiles.

Planter Standart membrane sheets, when fixed to a vertical wall, can be laid horizontally and vertically.

Laying fabric with a geotextile layer

The upper edge of the canvas should be 15 - 20 cm above the waterproofing installation line. When installing a decorative coating, excess material can be cut off. To fix the sheet, an edge clamp is attached.

Edge alignment for vertical mounting

The fabrics are overlapped. The edges of adjacent strips should be aligned with an overlap of 3 - 4 ledges wide. When laying, the seams of the joints are sealed with bitumen-based adhesive tape.

The sheets are fixed on dowels or on plastic fasteners, if it is necessary to connect the membrane with the bitumen layer.

Horizontal laying of membranes

As preparation for the foundation, Planter Standard is laid directly on the ground. The base must be flat, free from hard stony inclusions. The soil must be compacted. It is allowed to create a gravel cushion up to 10 cm high.

The fabrics are rolled out. Be sure to check that folds and creases do not form on the strips. The first roll can be rolled out along the marked line, spikes down. The following strips are laid with overlapping edges.

Tape connection on aluminum base

Connect the edges with a reinforced tape on an aluminum base.

Connecting strips with a textile layer

When using a web with a geotextile layer, the edges of the webs are connected in two stages. The textile layer is folded over, the polyethylene base is connected with adhesive tape, the connection is duplicated after laying the edges of the textile.

Inside the living quarters, the membrane is laid with spikes up. The membrane performs the function of sound insulation and thermal insulation, protection against moisture infiltration, especially on the first floors. The sheets are laid end to end. The seams between the sheets are glued with polymer-bitumen tape.

Video: use of profile membranes

Detailed instruction from the manufacturer on the use of the profiled membrane Planter Standart.

The use of membrane materials instead of classical concrete preparation in the construction of foundations is economically beneficial. The cost of arranging the base is reduced significantly. In order not to overpay, choose the optimal class of material: for private construction, it is enough to purchase Eco budget canvases. If you need to calculate the number of rolls and choose the type of membrane for a large construction site, contact the specialists, because the calculations take into account not only the area and number of storeys of the building, but also the characteristics of the soil.

Planter Standard is a profiled membrane, which is a modern construction sheet with protective qualities. This single-layer fabric is made of high density polyethylene, and its outer surface has rounded protrusions, the height of which is 8 mm. The membrane is quite light and has high strength, it is used in industrial and residential construction. You, too, can consider using it, as it allows you to achieve positive results and helps to save not only effort, but also money. However, before purchasing the material, it is necessary to become more familiar with its qualities and features of installation work.

Description

Planter Standard is a profiled membrane, which has a low weight, facilitating unloading/loading and transportation. This quality naturally simplifies installation work. The membrane is reliable and durable. She is ready to serve 50 years or more. Polyethylene materials have high strength, and the shape of the spikes is designed to ensure even distribution of the load over the entire surface.

Point influences are completely excluded. As practice shows, installation work can be completed in the shortest possible time. Planter Standard is a profiled membrane, which is designed to protect the waterproofing, as well as the lower zone of the basement from moisture. In addition, along the way, you can get rid of problems such as the germination of the roots of trees and shrubs, as well as pressure changes during settlement or base shift. You can also protect the foundation with this material before backfilling it. The material can be used to replace concrete preparation and protect the inner surface of the walls from exposure to excessive moisture. This is both condensate and water.

With the help of the membrane, you can quickly sanitize the facade, as well as remove moisture from it. The material allows you to maintain optimal temperature and humidity indoors. The described profiled membrane is so popular today due to its affordable cost and optimal qualities.

Specifications

Planter Standard is a profiled membrane, which is available in a thickness of 0.55 mm. The exact height of the spike is 7.5 mm. The weight of one square meter of material is 0.55 kg or more. When purchasing this composite sheet, you should take into account that it goes on sale, being cut into 2x20 m rectangles.

Consumers who are engaged in construction on a professional basis are quite often interested in such a characteristic as compressive strength. In the case of the described membrane, this parameter is 280 kPa. You may also be interested in the maximum tensile force of the roll. This parameter is 280 N / 50 mm. Water absorption by mass should also be taken into account, which does not exceed 1%, but the relative elongation at break is 20% or even more.

Planter Standard - profiled membrane (2x20 m) is a material, the flexibility of which on a beam at a low temperature is 45°C. The beam radius during the test was 5 mm.

Additional features of the material and its cost

If you decide to purchase Planter Standard, then you will have to pay 108 rubles for 1 m 2 of this material. One roll contains 40 m 2 . If you use a profiled membrane in construction or for waterproofing, the space formed between the canvas and the wall will be freely ventilated, air will circulate inside, improving the temperature and humidity conditions inside the building.

The membrane has not only high mechanical strength, but also resistance to chemical aggressive environments. The material does not interact with bacteria and fungi that can actively multiply on the surface of the walls. Planter Standard profiled membrane can be laid without fear that its surface will be adversely affected by ultraviolet rays. The canvas can be laid vertically and horizontally, and the elements, if necessary, are interconnected along a specially provided flat edge.

Features of mounting a profiled membrane

The profiled membrane Planter Standard (the price of which is not so high and was indicated above) must be laid according to a certain technology. If necessary, damp walls are disinfected, and laying can be carried out both inside and outside the building. The walls of the room can be dried in this way. The installation of the material is carried out mechanically along the perimeter of the walls and floor. The membrane must be reinforced with metal dish-shaped concrete dowels. In the lower part of the room, a membrane should be fixed on top of it, which can be made of polymeric materials or metal. It is selected depending on what will be the subsequent coating.

Features of laying when protecting waterproofing

The Planter Standard profiled membrane, the laying technology of which is described in the article and will allow you to avoid mistakes, can be mounted if it is necessary to protect the waterproofing layer. The latter is coated or pasted. If construction debris and backfill elements subsequently fall on the surface, the layer will not be damaged. As practice shows, the use of a membrane allows you to carry out work in a shorter time and reduce labor costs, thereby saving finances. The membrane is best used instead of brick pressure walls.

Installation is carried out at a speed of 4 m 2 per minute. It is necessary to lay the sheets with an overlap, the width of which is 4 ledges. Fixation should be carried out above the level of waterproofing using a metal strip or dish-shaped dowels for concrete.

Conclusion

Membrane can replace concrete preparation, which is true when the groundwater level is low. For this, a crushed stone litter is arranged on top of the groundwater, the thickness of which can be 10 cm. In this case, the membrane is located with protrusions down, and the longitudinal and transverse overlaps should be up to 10 cm.