Ariston Gas water heater SGA 200 R. Normal work mode

Outdoor model

Tank volume: 195 l

Power of gas burner: 10.1 kW

Maximum water pressure: 8 bar

Heating time at ΔT \u003d 45 ° C: 73 min

Hot water consumption at ΔТ \u003d 45 ° C: 245 l / h

Natural gas consumption: 0.76 m3 / day

Natural gas consumption: 1.069 m3 / hour
- liquefied gas consumption:784 g / h

Connection of the water supply circuit: 3/4 "

Connecting the Recycling Contour: 3/4 "

Connection of the DHW circuit: 3/4 "

Drain nozzle: 3/4 "

Connecting the gas supply system: 1/2 "

Diameter of chimney: 100 mm

Dimensions (height x diameter): 1713 x 495 mm

Weight: 61 kg

Warranty 1 year
Nozzles for transfer to liquefied gas not included*

Acquired goods can be taken on their own or use the delivery service in Moscow and the Moscow region. By making an order today, tomorrow you will receive it at your disposal. If necessary, you can use the service of operational delivery and get the products today.

Delivery to the entrance (about the possibility of raising the floor clarify from the manager)

Delivery is produced daily from 9 to 21 hours , including weekends and holidays.

Goods worth up to 6000 rubles can be picked by self-picking.

Points of self-delivery

For orders worth more than 6000 rubles:

• Within the Moscow Ring Road - from 0 to 500 rubles, (In the product card, the individual shipping cost is indicated)
• Outside the Moscow Ring Road to 10 km - 700 rubles,
• MKAD further 10 km - 700 rubles + 30 rubles for each kilometer.
• In the regions, delivery by the transport company (it is detached individually).

Delivery cost for

km from MKAD.

700 rub.

Unloading large-sized goods is carried out by the forces and means of the Customer.

Money is transmitted directly to the courier upon receipt of the goods. This method is the most popular among buyers due to simplicity and convenience of calculation.

Payment by bank card courier upon receipt

The couriers have a portable bank terminal, which allows the company "Teplovod-Service" to pay for goods by banking plastic cards (about the possibility of payment by a bank card with the manager).

Payment by bank card on site

To select payment with a bank card on the "Basket" page, you must select "Payment by bank card on the site" item.

Payment occurs through PJSC Sberbank using bank cards of the following payment systems:

After clicking on the "Online Payment" button, you will be redirected to the payment gateway of Sberbank Russia OJSC for entering your card details.

Please prepare your plastic card in advance. Additionally, you need to enter the name, email, contact phone number, as well as the reservation number for the identification of the payer. The connection with the payment gateway and the transmission of information is carried out in protected mode using SSL encryption protocol.

In the event that your bank supports the technology of secure carrying out Internet payments Verified by Visa or MasterCard Secure Code for payment, you may also need to enter a special password. Methods and the ability to receive passwords to make online payments you can clarify in a bank that has released a map.

This site maintains 256-bit encryption. The confidentiality of reported personal information is provided by OJSC Sberbank of Russia. The information entered will not be provided to third parties except the cases provided for by the legislation of the Russian Federation. Payment for bank cards is carried out in strict accordance with the requirements of the VISA INT payment systems. And Mastercard Europe Sprl.

When paying a bank card, interest is not charged.

Payment is a transfer of funds from the current account of the buyer to the seller's account, we work on the general taxation system with VAT. Delivery of goods is carried out after receipt of funds at the expense of the company "Teplovod-Service". This method is used in the calculations of legal entities.

Our details

Limited Liability Company "Teplovod-Service"

OGRN: 1105003006162

Inn: 5003088884

PPC: 500301001

Beach: 044525225

Bank: PJSC "Sberbank of Russia"

P / s: 40702810838060011732

K / s: 30101810400000000225

Yur. address: 142718, Moscow region, Leninsky district, Bulanikovskoe rural settlement, Warsaw Highway, 21 km., Office B-6

Special conditions

For goods with the status "to order" worth up to 100,000 rubles. No prepayment is required.

On goods with the status "to order" over 100 000 rubles. A prepayment is required in the amount of 30%.

• Any product sent by the transport company requires 100% payment.

Water heater Gas ARISTON SGA-200R Accumulative non-volatile is designed to provide hot water supply. It is fully adapted to Russian conditions, steadily operates with a reduced water or gas pressure. This is a product for floor installation that can be used in domestic and industrial purposes.

The volume of the tank is 195 liters, useful power - 8.6 kilowatt.

It is possible to connect the recycling line.

Water heater works on natural gas (methane). It is possible to transfer to liquefied gas (propane, butane).

Connecting items to the power supply is not required.

The water heater includes a tank with a protective anode, an outer metal case, highly efficient insulation of polyurethane foam, exhaust cap, a gas valve with an adjustable thermostat, a silent burner, a SGA piezoelectric ignition system.

A device that is part of the exhaust cap will block the gas supply and turn off the machine with a full or partial clogging of the chimney.

For security purposes, the product is also equipped with a flame control thermocouple, which will interrupt gas supply in the absence of flame.

Specifications:

ARISTON THERMO GROUP. - The global leader in the production of heating and hot water supply and a complete complex of equipment, systems and services. When developing and manufacturing, Ariston Thermo Group seeks to the optimal combination of comfort, energy efficiency and environmental care. In the Russian market, the company has been submitted since 1995 and is currently occupied by a leading position in the water heating equipment sector. Ariston Thermo Group produces a full range of heating and hot water equipment: water heaters, gas boilers, gas speakers, solar collectors and components. Since 2005, the Ariston Thermo Group has been operating in the city of Vsevolozhsk Leningrad Region for the production of accumulative water heaters - the most modern enterprise of the group.

The concept of "modern dwelling" is inextricably linked with the concept of "comfort". Comfort is something that cannot be seen, you can only feel it - and, of course, you can create it. Creating the most comfortable conditions in the dwelling - it is the task that for many years have been aimed at the decision of the developers of the household gas equipment of the Italian firmAriston.

Hot water - Comfort available to everyone

The new accumulative gas water heater Super SGA with an open combustion chamber will provide you and your seven almost unlimited hot water. Ease of operation and efficiency, Italian design and high reliability achieved by applying exclusive technologies and high-quality materials - all this Super SGA from Ariston!

· complete adaptation to Russian conditions - stable operation with reduced water and gas pressure input
· economical Gas consumption, wall / floor installation
· polyuretheni heat insulation, reduces heat loss by 15-20%
· exclusive high-resistant enamel coating of the inner surface of the tank
· piezelization with a thermocouple to control the flame
· magnesium anode
· gas valve with three security devices: thermocouple, limiting temperature sensor and smoke removal sensor
· ability to transfer to liquefied gas
· work without connecting to the electrical network
· possible serial / parallel connection
· external regulator and water heating temperature indicator
· external steel case

A model combining functionality, efficiency and elegant design, designed for both city apartments and country houses.

Why modern man gas storage water heater?

A gas boiler is a slightly simplified term. In everyday life, the complex and high-tech unit is called, designed to quickly heat the large volumes of flow water. If the urban apartment building is not connected to the hot water supply network, the installation of a cumulative gas water heater is the only way to get hot water in the volumes required to meet the needs of the modern family.

SGA is better than column!

More comfort: any amount of hot water at the required temperature

The temperature of hot water can be set from 40 to 72 ° C

Control of traction

Protective overheat thermostat

Each year, millions of consumers around the world choose Ariston products. This enormous confidence gives an important result: a brand that takes responsibility for meeting the needs for well-being, comfort and safety, which determines the quality of life.

Italian accumulative water heaters with natural product and open combustion chamber Super SGA will ensure comfortable domestic hot water supply regardless of one-time water consumption and the temperature of incoming water.

Gas accumulative water heaters can be used both in domestic and industrial purposes.

SUPER SGA Wall Water Heater has a model range of 50-80-100l.

Outdoor water heater Super SGA has a range of 120-150-200l.

Customer confidence when choosing the ARISTON technology has always contributed to high quality, comfort and safety of using its products. Today Ariston Thermo Group with an annual turnover of more than 1 billion euros occupies the position of the industry flagship, both in Europe and in other markets.

The significant segment of the market for the company is the production of thermal techniques, and, in particular, water heaters. Gas storage water heaters A Riston are divided into household and industrial, primarily according to power characteristics and volume. The SGA wall-mounted systems of 50-80-100 liters operate in the range of 2.9 kW - 4.4 kW, and the outdoor devices of the SGA series of 120-150-200 liters in the range of 6.4 kW - 8.6 kW.

Technical Specifications of Gas Water HeatersARISTON.:

· Piezorozhig with a flame control sensor

· The possibility of serial tank connections

· Maximum working pressure - 8 bar

· Reduced thermal losses due to the use of polyurethane foam insulation

· Ability to use liquefied gas

· Magnesium anode

· Gas valve with three-tier security unit

· Stable operation at input reduced gas pressure and water

A wide range, reasonable price and high efficiency causes the choice of buyers of the ARISTON technology throughout the world. Therefore, purchasing a gas cumulative water heater A Riston in our store you make an important strategic investment in family home comfort.

Gas Water Heaters Ariston Super Series SGA is better than column!

More comfort: any amount of hot water at the required temperature

The temperature of hot water can be set from 40 to 72 ° C

Control of traction

Protective overheat thermostat

Stable work even at low water and gas pressures

Gas storage water heater ARISTON SGA 120R. Floor installation with Piezorozhig.

Description.

Outdoor gas water heater ARISTON SGA 120 R is designed to heat the hot water of rather significant volume. Such a water heater is mounted vertically and installed on the floor, as it has considerable weight and volume. The inner tank of such a water heater is covered with a layer of special enamel that protects it from corrosion. Also the protection of the tank from corrosion is the magnesium anode. All this prevents damage to the inner tank from corrosion and scale, during a long time. The outer corps is made of high-quality steel. It contains the heating temperature regulator and the heating indicator. You can adjust the temperature in such a water heater in the range from 40 ° C to 72 ° C. Between the inner tank and the outer steel casing there is insulation of polyurethane foam, long storing heat heated water. The exhaust cap does not allow spent gases to penetrate back, and the existing gas valve is available: a thermocouple protection system, a temperature limiter (which overlaps gas access in the water heater failures) and adjustable thermostat. Also there is also a safety anti-fuse. The burner in such a gas column can switch to any type of gas, made of stainless steel, and has silent operation. Carrying such a gas water heater ARIRISON SGA 120 R can up to 4 water intake points. Such a water heater, and much more economical, as gas is much cheaper than electricity!

Features.

· Outdoor installation;

· Hot water maintenance up to 4 points;

· Stainless steel burner;

· Temperature adjustment;

· Exhaust cap.

Advantages of gas water heaters Ariston Series Super SGA:

· Complete adaptation to Russian conditions - steady work at low water and gas pressure input

· Economical gas consumption, wall / floor installation

· Polyurethenian thermal insulation, reduces heat loss by 15-20%

· Exclusive high-resistant enamel coating of the inner surface of the tank

· Piezelization with a thermocouple for control of the flame

· Magnesium anode

· Gas valve with three security devices: thermocouple, limit temperature sensor and smoke removal sensor

· Ability to transfer to liquefied gas

· Work without connecting to the electrical network

· Perhaps sequential / parallel connection

· External regulator and water heating indicator

· External steel case

Adaptation to Russian gas pressure (13 mbar).

In Europe, the pressure of water and gas differs from Russian. Gas pressure 20 mbar, and in Russia 13 mbar, but is usually even lower. And if you put an unadapted column, then its power and, accordingly, the productivity of hot water will decrease by 20-30% (the difference between 20 mbar and 13 mbar). In our country, in addition, very weak water pressure, especially in old houses in the center of Volgograd and in the area.

10 Basile Benefits Ariston Boilers

1. Wide selection of models for installation in various conditions.

2. Internal tank with a thickness of 1.8 mm, which ensures durability of operation.

3. Double reserve of tank strength. Working pressure - 8 atm., At the same time, the test pressure is 16 atm.

4. Double Tank Protection: Overhead fine enamel + magnesium anode enlarged size. 100% preservation of the hygiene water quality, no smell. Increased protection against scale.

5. Double overheating protection. Two independent thermostats will not allow water overheating. You can even use the boiler. Everything is completely safe.

6. Minimum heat loss. Heat insulation from dense polyurethane foam provides daily heat loss of 50 liter apparatus of about 200 W / day. Provides gas consumption savings (there is no need to constantly include for water heating).

7. High pressure protection. The input safety valve does not allow pressure in the tank over 8 atm.

8. Suitable for installation in the country. Water reservoir should be located above the upper point of the water heater. For the work of the boiler, the minimum water pressure is necessary.

9. Temperature controller. You can set the desired water heating temperature.

10. The maximum water heating temperature is 80 ° C, the recommended operating temperature is not more than 60 ° C.

The device consists of the following elements:

• tank, coated from the inside by a layer of enamel and having a protective anode;
• outer metal housing with lacquer coating;
• heat insulation of high density polyurethane foam (without CFC), reduced heat loss;
• exhaust cap of the reverse thrust;
• gas valve having:
• adjustable thermostat
• safety system with thermocouple,
• temperature limiter that stops gas supply in the case of the abnormal operation of the device;
• silent burner made of stainless steel, overgrained to any type of gas;
• piezoelectric ignition;
• safety device.
• an extreme limiter of temperature that overlaps the flow of gas in case of abnormal operation;

Designations

E.Cold water entrance (diameter 3/4 ")
U.Hot water outlet (diameter 3/4 ")
G.Gas inlet (diameter 1/2 ")
F.Devolition of smoke removal system diameter 81 mm (SGA 120-150), diameter 100 mm (SGA 200)
RCConnecting the recycling line (diameter 3/4 ")
S.Plum

Principle of operation

Inside the water filled tank along the longitudinal axis there are one or more steel chimneal pipes. The burner is located under chimney pipes, and combustion products are removed through these pipes. To increase heat transfer inside the chimney pipe, a divider is installed. The heat from the flame is transmitted through the walls of the combustion chamber, and from the combustion products - through the walls of the chimney pipe. The exhaust gases from the inner chimney pipe through the exhaust cap and the gas duct fall into the chimney. Combustion products are removed through chimney due to natural traction; By coaxial or separate pipes due to natural traction

Mode of normal operation.

When the set temperature is reached, the control thermostat turns off the burner. When parsing hot water, cold water enters the water heater. The thermostat registers the temperature drop and includes a burner. Cold water is heated to a temperature specified by the thermostat. This means that the water heater is "Ready": All water in the tank has reached a given temperature.

Hydraulic accessories

Safety valve (or security group).

Resetting excess water arising from heating (approximately 2 ÷ 3% of heated volume).

Prevents water penetration from the water heater to the water supply network.

Drain (possible only in some modifications).

Shut-off valve (available only in some modifications).

At least once a month, open the reset valve and shut-off valve.

Pressure reducer.

Check the input pressure: if it exceeds 3.5 bar, set the pressure reducer to the security group. Recommended water pressure at the entrance - 2 ÷ 3 bar; If the pressure at the entrance is large, the reset through the reset valve will be large, which will lead to large loss of water and, possibly, to malfunctions.

ATTENTION!!! - Never install the pressure reducer between the discharge valve and water heater.

To transfer the apparatus from natural gas to liquefied, it is necessary to use a special nozzle

under liquefied gas (purchased separately)

Instructions for translation contained in the instruction manual for the apparatus are as follows:

Replace the nozzle of the main burner.

Replace the nozzle of the ignition burner.

Enclose the appropriate sticker with a marking mark on liquefied gas.

Make sure that the gas pressure reducer installed in front of the device corresponds to power

(gas flow rate) water heater.

When changing the gas valve gas valve is not required.

To ensure the prolonged and trouble-free operation of the gas cumulative water heater and the preservation of its performance, it is necessary to regularly inspect, care and maintenance.

Conducting extraordinary cleaning of the gas cumulative water heater may be required more often than 1 time per year, in the case of intensive work of the water heater indoor, in the air of which contains a lot of dust. This can be determined visually on the changed color of the flame of the retirement and the main burner of the gas cumulative water heater. If the flame has become yellow or smoking, this indicates that the burner has been hammered by particles of dust from air, and it is necessary to clean and maintain a gas water heater. In the normal case, the flame should be blue.

SERVICE

1. Check the tightness of the water group.

2. Check the tightness of the gas group, if necessary, replacing the gaskets.

3. Visual control of the overall condition of the apparatus and burning.

4. Visual control of the combustion chamber, if necessary - cleaning the burner.

5. According to the results of checks of paragraphs 3 and 4, the possible disassembly and cleaning of the nozzle.

6. Adjusting the input pressure of the gas.

7. Verification of the operation of the water group safety systems (at the limiting temperature and

limit pressure).

8. Verification of the operation of the gas group security systems (on the absence of gas or flame

list, checking the gas valve, etc.).

9. Premises checking.

10. Checking the removal of combustion products.